Find or Sell any Parts for Your Vehicle in USA

Toyota Mr2 2.0l Turbo Prof Blow Off Valve Jdm 3s-gte 3sgte Prof Blow Off Valve on 2040-parts.com

US $119.00
Location:

Irving, Texas, US

Irving, Texas, US
Item must be returned within:14 Days Refund will be given as:Money back or replacement (buyer's choice) Return shipping will be paid by:Buyer Restocking Fee:No Return policy details:DEAR CUSTOMER, ITEMS MUST BE RETURNED IN ITS ORIGINAL CONDITION IN ORDER TO BE EXCHANGED, SHIPPING NEEDS TO BE PAID BY BUYER BOTH WAYS. THANK YOU! Returns Accepted:Returns Accepted Brand:Toyota Manufacturer Part Number:PROF Other Part Number:Toyota MR2 Turbo JDM 3SGTE Prof Blow Off Valve Placement on Vehicle:Front Warranty:No Country of Manufacture:Japan

 photo 6a84ba92-0ca5-4b70-ab7e-e267fd9f3bca.jpg

 photo 2ae8d929-8299-4781-9bee-b2c4fdcdb092.jpg

ALN JDM Auto Motors is one the largest JDM Low Mileage Engines & Transmissions Importer!!!
 
We have the largest inventory of JDM SOHC, DOHC, VTEC, NON VTEC, i-VTEC, SUPERCHARGED, TURBO CHARGED, KLZE, ROTORY, ETC. in Stock at the competitive low prices!

 Please feel free to contact us at the above mentioned company phone numbers or info jdmautomotors com with make & model of your vehicle and what exactly you are looking for, we will source it out for you.

THIS AUCTION IS FOR A USED TOYOTA MR2 2.0L TURBO PROF BLOW OFF VALVE JDM 3SGTE / PROF BLOW OFF VALVE 

PLEASE NOTE:
WE HAVE A LARGE QUANTITY OF LOW MILEAGE JDM ACURA/ HONDA,  NISSAN / INFINITI, TOYOTA / LEXUS, MAZDA, MITSUBISHI ENGINES AND TRANSMISSIONS IN STOCK AT VERY LOW COMPETITIVE PRICES AVAILABLE
 
DEAR CUSTOMERS,
IF YOU ARE INTERESTED IN PURCHASING THIS JDM TOYOTA MR2 PROF B.O.V OR ANY OTHER JDM ENGINES, TRANSMISSIONS, PARTS PLEASE BID ONLINE OR
 CONTACT US AT:
PH: 972-986-2886 OR TOLL FREE: 1-888-986-2880
EMAIL: INFO AT JDMAUTOMOTORS DOT COM

THIS JDM TOYOTA MR2 PROF BLOW OFF VALVE WE HAVE IN STOCK WAS REMOVED FROM A RUNNING TOYOTA VEHICLE IN JAPAN AND IMPORTED TO US DIRECTLY!!!
    

SOLD AS IS (NO WARRANTY   
&
100% CUSTOMER SATISFACTION GUARANTEED !!!

PLEASE CHECK THE  PICTURES LISTED FOR PROPER FITMENT BEFORE BIDDING ON THIS  ITEM, ALSO BE ADVISED THAT THESE ARE JDM IMPORTED BLOW OFF VALVE AND YOU MIGHT NEED TO DO SOME MODIFICATION FOR PROPER 
USE / FITMENT". IF YOU ARE USING IT IN ANY OTHER VEHICLE THAN TOYOTA MR2 
PLEASE DO YOUR RESEARCH...

" PLEASE DO YOUR RESEARCH PRIOR TO PURCHASING, WE WILL NOT BE RESPONSIBLE IF IT IS NOT COMPATIBLE OR DOES NOT FIT IN YOUR VEHICLE / CAR "
 
***FREE SHIPPING TO  LOWER 48 STATES, EXCEPT AK, HI, PR*** 
***SHIPPING TO AK, HI & PR FLAT RATE BOX USPS PRIORITY $19.00***

METHOD OF PAYMENTS
PAY PAL
 
***ALL  MAJOR CREDIT CARDS ACCEPTED***
AMEX
DISCOVER
DINNERS CLUB
MASTER CARD
VISA
WE ALSO WELCOME AND ACCEPT, 
BANK WIRE TRANSFER / TT    
CASHIER / CERTIFIED CHECK  
COD FOR LOCAL DELIVERIES
CASH ON PICK UP

DEAR CUSTOMERS, IF YOU ARE PAYING BY ANY MAJOR CREDIT CARD OR BANK WIRE TRANSFER PLEASE CONTACT US AT 
972-986-2886 WITH YOUR INFO THAT WAY WE COULD PROCESS THE ORDER, IF YOU ARE PAYING BY CASHIER/ CERTIFIED CHECK PLEASE MAKE IT PAY ABLE TO: ALN JDM AUTO MOTORS  AND MAIL TO US AT THE SAME ADDRESS AS OUR BUSINESS MENTIONED  ABOVE IN THIS AUCTION, ONCE WE RECEIVE IT USUALLY TAKES ABOUT 2-3 BUSINESS DAYS TO CLEAR IN TO BANK ACCOUNT THEN WE WILL SHIP OUT YOUR ORDER AND PROVIDE YOU WITH A TRACKING NUMBER.
 
THANK YOU!

WHAT YOU SEE IS WHAT YOU GET !!!

***ACTUAL PICTURE  SHOWN***  

" YOU WILL RECEIVE THIS JDM TOYOTA MR2 BLOF BLOW OFF VALVE AS SHOWN "

WARRANTY INFO:

ALN JDM Auto Motors offers 30 days start up warranty on any non performance engines, transmissions and brand new Ignition Distributors.
   
 Any Performance engines such as Vtec/ i-Vtec, Turbocharged, Supercharged, Mazda Klze (Excluding Rotory & Diesel Engines)comes with 14 days start up warranty.

   
All Mazda Rotory such as 13B Turbo II,13B Twin Turbo, 20B 3 Rotors, 13B-RE are (SOLD AS IS). We make sure they are not Ceased up or Locked before selling it.


All Accessories and other body parts such as Steering Wheels, Clusters, Floor Mats, Seats, Rims, Ecu, Maf Air Flow Sensors, Nose cuts Etc. are also (SOLD AS IS)
 
Warranty does not cover  any External Parts or Accessories on the Engines and Transmissions such as Distributor, Distributors' cap / cover, Intake Manifold, Exhaust Manifold, Oil Pan, Solenoids, Wiring Harness, Plugs, Sensors, Belts, Etc. Which in most cases needs to be changed / swapped over from your stock Engine or Transmission any way.
 "Also in most cases you have to use these JDM engines as Long Block Only because they are out of Right Hand Drive Cars in Japan".
   
  
ALN JDM Auto Motors, Will not be responsible for any improper installation on our products, it must be installed by ASE 
Certified Mechanic.

  
Any costs associated with repairs or replacements, including labors, installations or any other related costs, shipping charges would not be covered under warranty. We ask our respected customers to contact us with any problems or concerns about our products within   
14 days from the date of purchase on the original invoice.

If the Product has been altered in any way, improperly installed, or not used for its' intended purpose,warranty will be voided.

In the unlikely situation of our products being defective / bad you need to contact us first with a letter / document from your Certified Mechanic as a proof that way we give you a RMA number(Return Merchandise Authorization) then you could ship it back to us,
other wise the shipment is going to be refused here at our establishment at customers' own expense. 

Exchange is only offered if our product is bad, again we would require a written document from your ASE Certified Mechanic proofing it. For any other reason if a customer refuse or return our products there will be a 25% restocking fees plus both ways shipping.

Shipping & Handling

ALN JDM Auto Motors offers its' Customers with the Lowest Shipping Charges possible both Domestic & International!!!
We use several different Freight Companies to get the best and lowest price on shipping.

Dear Customers,
In order to provide you with an accurate shipping rate please contact us with your complete address where it is shipping to by
calling at: 972-986-2886 / 469-500-0301
or
Email us at:
info jdmautomotors com
alnjdmautomotors gmail com

Domestic & Canadian shipments Estimated Time of Delivery is between 2-10 business days by Freights.


International shipments are by Ocean Freight to the nearest Ocean Port of Discharge and Estimated Time of Delivery is between
4-8 weeks.

Attention Customers:
We at ALN JDM Auto Motors do our best to ship your orders by packaging and putting it on the skids on big shipment as safe as possible free of any damage leaving our warehouse, but since we don't do the shipping and handling part ourselves there fore we ask our Respected Customers to please check everything when receiving it by freight company and make sure there is no sign of damage, if you see anything please make a note of it on the Bill Of Lading before signing to receive it from Freight Company's drivers.
That way it makes it easier to do a claim with Freight Company for any damages.
 
Thank you!
 
  We appreciate your business!!!
 
           

Honda fires new F1 engine for first time

Fri, 25 Oct 2013

EVEN BEFORE the 2013 Formula 1 season has ended preparations and development are already well under way for next year, especially so because of a radical change to the rules. From 2014 all cars will be powered by small 1.6-litre turbocharged V6 engines, signalling the end of the current 2.4-litre non-turbocharged V8 engines, bringing them closer in basic layout - if not output - to normal road car engines. For Honda 2015 is a return to the sport in partnership with McLaren, and the Japanese firm's engines will power the 2015 McLaren challenger.

Ford Focus RS WRC Edition – Swiss made

Sat, 06 Feb 2010

Ford in Switzerland are producing juts 50 Ford Focus RS WRC Edition Only a few days ago we reported on the latest Focus RS – the Focus RS Clubsport. Ford are planning to build 500 RS Clubsports as a farewell to the current version of the fast Focus. And it sounds like a hoot, with an extra 50bhp and less weight it will probably break the 5.0 second 0-60mph barrier.

Gemballa Enzo MIG-U1 revealed

Tue, 22 Dec 2009

The Gemballa Enzo MIG-UI Update 12/1/2010: Gemballa have now sent us more details of the Gemballa MIG-U1 and a set of photos. Revealed is probably too strong a word, as it would appear that Gemballa are not overly keen to let anyone have any information on their Gemballa MIG-U1, a customised Ferrari Enzo created for the Gemballa Middle East Distributors the Illyas and Mustafa Galadari Group. Gemballa has taken Mustafa’s own Enzo and ‘Gemballa-ed’ it.