Find or Sell any Parts for Your Vehicle in USA

Uc411 104239 Motul 300v 0w-20 High Rpm Engine Oil 2pk. (4liters) on 2040-parts.com

US $79.99
Location:

Union City, California, United States

Union City, California, United States
Condition:New Country/Region of Manufacture:France Part Brand:Motul Country of Manufacture:France Manufacturer Part Number:104239


2 cans (4liters)

300V High Rpm
0W-20

Racing lubricant for Motorsports
100% Synthetic – E Technology

TYPE OF USE
All racing gasoline or diesel engines, naturally aspirated or turbocharged fitted with injection (direct /
indirect) or carburetted.
For race prepared engines operating over a wide range of rpm and temperatures.
PERFORMANCES
STANDARDS Above existing Motorsport standards.
TYPE OF USE Qualifying – Short distance race
The SAE 0W-20 viscosity grade minimizes engine internal friction to allow maximum power output.
E TECHNOLOGY
For decades MOTUL has developed high performance synthetic Ester based lubricants.
By selecting esters over other high performance synthetic base stocks and combining them with an
innovative additive package, MOTUL has created a perfect synergy.
This most advanced E technology allows maximum power output of the engine without
compromising reliability and wear.
ADVANTAGES
The SAE 0W-20 viscosity enables to compensate low engine oil dilution by unburned fuel.
Maximum oil film resistance at very high temperature: Engine wear is reduced.
Friction Modifier: Maximum power output, decrease operating temperature.
Low volatility: Oil consumption is reduced.
High shear stability: Stable oil pressure whatever using conditions.


RECOMMENDATIONS
Uses of SAE 0W-20 viscosity require specific engine design and assembly.
For optimal engine performances avoid mixing with other synthetic or mineral lubricants.
Oil change: According to your own use.
PROPERTIES
Viscosity grade SAE J 300 SAE 0W-20
Density at 20°C (68°F) ASTM D1298 0.853
Viscosity at 40°C (104°F) ASTM D445 42 mm²/s
Viscosity at 100°C (212°F) ASTM D445 8.0 mm²/s
Viscosity index ASTM D2270 166
HTHS viscosity at 150°C (302°F) ASTM D4741 2.7 mPa.s
Pour point ASTM D97 -51°C / -59.8°F
Flash point ASTM D92 222°C / 431.6°F
TBN ASTM D2896 7.97 mg KOH/g

2014 Nissan Micra Limited Edition launched

Fri, 31 Jan 2014

The Nissan Micra Limited Edition (pictured) comes in a choice of three colours with contrast roof The Nissan Micra was given a facelift last year to try and remove perceptions of cost-cutting by Nissan after they took production of the Micra off to India, and now we get a titivation of that facelift with the Nissan Micra Limited Edition. But instead of doing what most car makers do, which is adding extra spec for less than it would cost to option it, Nissan’s idea of a special edition is to give it some unique cosmetics. So the Micra Limited Edition comes in a choice of three colour schemes with a contrast roof and mirrors - Pacific Blue with a White roof and mirrors, Shiraz Red with a Black roof and mirrors and Alabaster White with a Red roof and mirrors.

Audi RS5 engine confirmed, plus RS5 cabrio

Wed, 13 May 2009

By Tim Pollard (artist's impression by Radovan Varicak) Motor Industry 13 May 2009 13:44 Audi will fit a refettled naturally aspirated 4.2-litre V8 to its secret new RS5, CAR can confirm. We had previously reported the RS5 would use a twin-turbo iteration of this engine, but a senior source has told us it will not feature forced induction. We’re told it’s the same high-revving engine that powered the outgoing RS4, albeit spruced up with the latest Ingolstadt know-how.

2009 EyesOn Design Awards

Thu, 22 Jan 2009

The winners at the fourth annual EyesOn Design Awards held at the 2009 NAIAS in Detroit last week read like a serving of alphabet soup, with the top awards going to Audi, BMW and Cadillac. Presided over by 20 top design executives from automotive manufacturers and by academics from transportation design programs, the EyesOn Design awards are presented by the Detroit Institute of Ophthalmology (DIO) - an internationally recognized non-profit organization known for helping the blind and visually impaired. Founding Chairman Tom Gale (former Vice President of Design at Chrysler) selected the following people to head up this year's jury: Chris Bangle, Director of Group Design for BMW; William 'Willie' G.