Urethane Kit- Forsch Polymer Corp 80a Kit To Pour Your Own Engine Mounts-great!! on 2040-parts.com
Woodstock, Georgia, US
FORSCH POLYMER CORP
ELASTOMERIC URETHANE KIT
80 A DUROMETER BLACK COLOR
TOP SHELF PRODUCT. WORKS GREAT. EASY TO WORK WITH!
"Do It Yourself" Motor Mount Inserts Kit
80A BLACK ELASTOMERIC URETHANE + INSTRUCTIONS
A 2 PART KIT!
Why Use Motor Mount Inserts?
* Increase Horsepower to the Ground
* Reduced Wheel Hop
* More Responsive Motor
The first and foremost reason for firming up your motor mounts is to hold the engine more firmly in place. Often the more pliable stock motor mounts will allow the engine to move too much - resulting in wheel hop and a loss of power. The more extreme version of this is when a an owner has increase the vehicle's horsepower more than the stock motor mounts were meant to handle. This can cause tearing the stock motor mounts as well as damage to the engine and engine bay should the engine be allowed too much movement.
Will This Kit Work on My Motor Mounts?
The mounts you're working with MUST have voids in them like the mounts shown here. These voids are what you will be filling with urethane. Without voids - there is nothing to fill!
Most FWD vehicles will have several mounts designed like this.
Which Mounts Should I Use?
Most FWD vehicles have several different motor mounts - typically from 4-5 mounts. Some of the motor mounts are designed significantly different from the others. TORQUE mounts are the motor mounts designed to reduce the amount of engine movement when power is applied. Main Mounts are the mounts designed to support and hold the weight of the engine.
TORQUE mounts are the most effective mounts at providing a great rigidity to the engine assembly without transmitting as much natural vibration to the driver
LIKE THE ONE ON THE QR25DE WHERE IT MOUNTS TO THE R/F FRAME RAIL!
Torque mounts are typically located at the front and or rear of the engine. Main mounts are typically located higher on the engine assembly as the engine weight usually hangs from these.
While it is typically possible to firm up all the mounts on a vehicle - the torque mounts will provide the best trade off of performance and vibration.
What is Required to complete this Project?
Liquid Urethane - available in 60A, 80A or 94A - this listing is for 80A. (INCLUDED - 80A)
The following items are not included in this kit and must be purchased at a local hardware store. These can be purchased for approximately $10
Duct Tape - Seals one side of the mount
Contact Cement - Helps the duct tape seal against greasy surfacesDegreaser - Cleans the mount of grease and oil to ensure an easy project Sand - in a box - vital to the project - don't skip this one.
What Level of Hardness should I use?
There are a number of firmness or "durometer" levels offered. The default is 80A as it's the most used and most popular. These are:
60A - For the Daily Driver - This is the softest formula offered that will still make a noticeable difference in vehicle performance. This softer formula is best for tuners that still want to increase performance without trading off as much personal comfort.
80A - Even trade off between performance and vibration when it comes to motor mount inserts. This formula is the most popular for it's ability to significantly increase vehicle performance while still allowing some small amount of flex in the mounts to keep vibration and noise to reasonable levels
94A - Race Quality - Not for the daily driver. This formula is the hardest of the 3 available. Providing the best reduction in motor movement - this version will also allow a rather significant amount of engine vibration to be transmitted into the vehicle.
Is one kit enough to complete my project?
One kit includes 1 lb of the BLACK Liquid Urethane. On most vehicles this will be enough to complete the project on ALL the mounts on a vehicle.
What Kind of Quality Urethane is included?
This kit includes 1 lb of the highest grade 80 A BLACK liquid urethane available for a project like this. This product has been proven to work well for creating motor mount inserts and lasting for the life of the mount.
Where can I find the installation instructions?
The installation instructions for this product can be found here:
ONLY ONE 80 A 1Lb KIT TO OFFER SO BUY NOW AND SAVE!
FORSCH IS THE INDUSTRY LEADER IN ELASTOMERIC POLYMERS!!
Motor Mounts for Sale
Westar em-8711 motor/engine mount-engine mount(US $74.47)
New 2003 2011 saab 9-3 9-3x factory 4cyl engine motor vibration damper mount(US $17.13)
89 dodge ram cummins diesel 6bt 12v water neck / outlet(US $45.00)
Parts master 8708 transmission mount-auto trans mount(US $31.99)
Parts master 9300 motor/engine mount-engine mount(US $81.99)
Toyota corolla new oem motor mount 12372-02070(US $38.51)
Watch: 2014 Ram 1500 EcoDiesel video walkaround
Wed, 17 Jul 2013Mike Cairns, chief engineer for Ram, says that people just can't help but pester him with the same damned question: “Why don't you put a diesel engine in a 1500?” Thanksgivings were, we imagine, brutal. The coming 2014 Ram 1500 EcoDiesel ought to steer family dinners back to less abrasive topics, like partisan politics. Get an up-close look at the truck in this video walkaround hosted by none other than Cairns himself.
McLaren P1 Track confirmed as McLaren Automotive goes in to profit
Wed, 04 Jun 2014McLaren are building a track version of the P1 (pictured) for P1 customers only It’s only three years since McLaren Automotive entered the hugely competitive market for high-end supercars (well, it’s four years, but only three since the first 12C went to a customer), but it’s already in profit. McLaren made an operating profit in 2013 of £12.4 million (and a pre-tax of £4.4 million) on sales of £284.4 million and did so – as predicted – by hitting their sales targets – McLaren sold 1359 12Cs and 36 of the McLaren P1 hypercar. And that looks to be just the start.
Vauxhall Adam arrives
Wed, 11 Jul 2012The Vauxhall Adam – Vauxhall’s new city car – has been revealed and will go on sale in January 2013 with a range of small petrol engines. It was clear when we revealed the Vauxhall Adam last week (well, its German sibling, the Opel Adam, anyway) on its first holiday in Spain to grab some pretty pictures that the official reveal would be close. And here it is.