Find or Sell any Parts for Your Vehicle in USA
Boat Parts > Outboard Engines & Components > Complete Outboard Powerheads

Yamaha Outboard Powerhead 2.6 Ltr Hpdi 150,175, 200hp / 1 Yr Warranty on 2040-parts.com

US $2,950.00
Location:

West Sunbury, Pennsylvania, United States

West Sunbury, Pennsylvania, United States
YAMAHA OUTBOARD POWERHEAD 2.6 ltr HPDI 150,175, 200hp / 1 YR WARRANTY, US $2,950.00, image 1
“At Outboard Rebuild when we use the word ReMANUFACTURED you can be 100% sure that all cylinders have been machined by only the best machines that are available. Rotler F3 boring center that is designed to do blind hole engines, Diamond computer assisted hone, all critical surfaces machined back to uniform for proper gasket sealing. We install NEW parts, pistons, Piston rings, wrist pin's, Oil gear, thermostats, bearings, crank seals, the list goes on and on.. We feel you should get what you pay for " A powerhead that last YEARS not months or even weeks ..”
Brand:Yamaha Stroke:2-Stroke Engine(HP):150,175,200 Country of Manufacture:United States


"OUTBOARD REBUILDER" THE WORLD LEADER SINCE 1972 

REMANUFACTURED OUTBOARD POWERHEADS  


BUY TODAY WE SHIP TODAY !!

85% discount on all shipping to U.S. and Canada


FREE INJECTOR CLEANING WITH EBAY PURCHASE

YOU ARE BIDDING ON ANY YAMAHA OUTBOARD LONG BOCK 2.6 ltr 150, 175 or 200 HPDI. Specify what hp after auctions end

Powerhead will come with all the gaskets it will take to finish assembling engine along with return shipping instruction

Reusable core required at auction price


We have the right machines along with over 40 years in marine field !! We know what it takes to do a as new powerhead with no short cuts !

Over 200 marine dealers, rental shops and Tow boat services use our service!!

 

PLEASE READ- anyone who does , may not be able to assimilate the information. For those few who do, shall ultimately not have to paddle home


-----------------------------------------------------------------------=======================================------------------------------------------------------------------


WITH OUR BUYING POWER AND STATE OF THE ART MACHINES WE CAN SAVE YOU MONEY $$$$ WITHOUT SACRIFICING QUALITY !!  OVER 20,000 powerhead done and 200 marine dealers to our credit we can offer you same as new powerhead for a fraction of the price.


“At Outboard Rebuild when we use the word ReMANUFACTURED you can be 100% sure that all cylinders have been machined by only the best machines that are available. Rotler F3 boring center that is designed to do blind hole engines,  Rottler HP7A Diamond computer assisted hone for unsurpassed cylinder wall finish, critical in 2 stroke motors that rely on oil/gas mix that is needed to lubricate, We machine all critical surfaces back to uniform for proper gasket sealing. We install NEW parts, Pistons, Piston rings, wrist pin's, Oil gear, thermostats,rod bearings, crank seals, the list goes on and on.. We feel you should get what you pay for " A powerhead that last YEARS as they should

  The Industry (outboard remanufacturing) standard for rebuilt motors is ONLY 100 hours per outboard repair, and a loss of up to 20% power loss . Here is the problem:  piston and ring seating is dependent directly on cylinder wall finish. To accomplish the proper finish, the method used is referred to as "plateau finish". This process is how today's automobile motors go well over 100,000 instead of maybe 50,000 miles like they used to. To obtain this finish in a blind hole motor (outboards) you can't use automotive machining methods. Special machines using diamond precision computer controlled hones are needed. These machines with their support equipment are a must on modern outboards, gone are the days that you can do this correctly at a dealer or in a garage. With this in mind we attempt to educate.

   For the uneducated customer who looks only for low price also gets a new friend.  Who? The dealer or person who is going to rebuild your engine again, to the industry standard, AGAIN...


DID YOU KNOW WE ARE THE ONLY REBUILDER THAT REBUILDS OUTBOARD CRANKSHAFTS IN HOUSE ?  All our Rebuilds have the crankshafts replaced or refinished. We don't put new bearings on a used crankshaft without at least checking integrity to .002 of an inch then polishing. We are the only rebuilder who can refinish crankshafts if needed with the proper equipment, "submerged arc welding" for hardened nitrated outboard crankshafts.  
  contact us throgh ebay for a copy of our warranty

 

                       We will arrange all shipping by FedEx freight. We ship daily and will pass our 85% discount on to you !! Residential service available with lift gate.

Questions on shipping or core policy 877 983-2537 or 724-290-0509

Jaguar & Land Rover eschew Detroit for Delhi

Thu, 03 Nov 2011

The Jaguar C-X16 will be on show at the Delhi Motor Show in January. Although Jaguar Land Rover has revealed that it won’t be exhibiting at the 2012 Detroit Motor Show in January – instead it will be out in force at the Delhi Motor Show – it’s really not a huge deal. Motor Show exhibiting is an expensive business, and despite JLR’s strong sales, costs are a factor.

Ford Explorer (2011) launches +video

Tue, 27 Jul 2010

The 2011 Ford Explorer Because it’s unlikely we will get the 2011 Ford Explorer on this side of the Pond, we haven’t covered its interminable tease in any real detail. Yes, we reported on the 2011 Explorer getting Ford’s new Curve Control, an electronanny designed to cure understeer, but we didn’t report every silly photo Ford released. But not being thorough on reporting a really boring and drawn out tease is one thing, but we can’t ignore the launch of a new version of a vehicle that until quite recently was selling almost 500k a year.

Ford trucks pulling it to the next level

Wed, 05 Mar 2014

With the heavy-duty truck segment heating up, Ford is breaking out some tough new vehicles and an upgraded 6.7-liter diesel engine. The second-generation 6.7-liter Power Stroke V8 turbo diesel packs a manufacturer estimated 440 hp with 860 lb-ft of torque. This is a gain of 40 hp and 60 lb-ft over the first-gen 6.7 oil burner.

2040Parts.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.217 s, 11206 u