Find or Sell any Parts for Your Vehicle in USA
Snowmobile Parts > Brakes

1997 Polaris Indy 440 L/c Evolved Chassis Brake Rotor Disc 500 Trail Classic Xlt on 2040-parts.com

US $11.99
Location:

Lake Crystal, Minnesota, United States

Lake Crystal, Minnesota, United States
1997 Polaris Indy 440 L/C Evolved Chassis Brake Rotor Disc 500 Trail Classic XLT, US $11.99, image 1
“Used Item - May show some wear from normal use - Please look at all pictures carefully”
Brand:Polaris Manufacturer Part Number:1910086 UPC:Does Not Apply

   Benny's Powersports  

WE ARE HERE TO HELP - PLEASE CALL US IF YOU HAVE ANY QUESTIONS - (507) 726-2808. 

*Follow us on Facebook at https://www.facebook.com/bennyspowersports.

You may be interested in our other eBay listings.

Part Description

1997 Polaris Indy 440 L/C Evolved Chassis Brake Rotor Disc 500 Trail Classic XLT

This part is off of a 1997 Polaris Indy 440 L/C Evolved Chassis.  The part may fit many other years and models of Polaris Snowmobiles. 

Please Check fitment BEFORE you purchase.

Assemblies where 1910086 is used


*All parts are shipped exactly as they are pictured unless otherwise noted in description.

*All parts are inspected and deemed usable unless otherwise noted in description.

*Parts may require some cleaning and adjustments for proper installation.

*Engine parts should be properly cleaned and lubricated prior to assembly. 

*Used Carburetors should be cleaned and tuned before installation. 

*ALL PARTS SHOULD BE INSTALLED BY AN EXPERIENCED MECHANIC - (I will not be held responsible for part failure due to poor installation)

Part Fitment

You, "the buyer", are responsible for doing all the research prior to buying this part. If you are not sure that it will fit your vehicle, please take the time to do the research prior to buying the item. I will try to answer fitment questions to the best of my knowledge and resources.

Used Parts

The dictionary defines the word "used" as follows: "Not New, Previously Owned". With that being said, this is a "used" part. I will always do my best to make sure the parts that I sell are in good usable condition. I test vehicles before I tear them down. I also inspect each part before taking pictures. I have no interest in selling you a part that you can't use, but you have to keep in mind this is a used part and may need to be cleaned or serviced in some way prior to re-installation. I also sell new parts but they are much more expensive.  

Bearings, Bushings, Gaskets, Seals, Clutch Plates, Sprockets, Pistons, Rings, and Brake Pads are all considered "wear parts" and cannot be guaranteed unless specifically stated in the description that they are good.

PLEASE LOOK AT EVERY PICTURE CLOSELY!

Engine/Motor & Carburetor Parts

** All engine parts have been drained of oil and fluids. However, there may be residual fluid in, on, or around the part(s). YOU or YOUR MECHANIC are solely responsible for making sure the part(s) are properly  cleaned, lubricated, and installed by a professional mechanic. We highly suggest using new gaskets and seals for engine reassembly as well as following the “Factory/OEM Service Manual” guidelines for proper assembly procedures and torque values for all fasteners. This and all engine parts that we sell are deemed usable by Factory/OEM standards and have come off a good running engine (UNLESS NOTED IN THE DESCRIPTION OF THE LISTING).

** All Carburetor/Intake parts have been drained of fuel. Sometimes these parts sit on a shelf for several weeks/months prior to selling them. YOU or YOUR MECHANIC are solely responsible for making sure the part(s) are properly cleaned, lubricated, and installed by a professional mechanic. We highly suggest servicing carburetors and throttle bodies following the “Factory/OEM Service Manual” guidelines for proper assembly procedures and torque values for all fasteners. This and all carburetor/intake parts that we sell are deemed usable by Factory/OEM standards and have come off a good running engine (UNLESS NOTED IN THE DESCRIPTION OF THE LISTING).

ATTENTION: FAILURE TO FOLLOW THE ABOVE PROCEDURES AND GUIDELINES MAY RESULT IN CATOSTROPHIC ENGINE FAILURE – AND/OR PREMATURE ENGINE WEAR. Therefore, Benny’s Powerports LLC and its employees will not be held responsible for any and all failures associated with the use of these engine parts. 

Shipping

I ship Monday through Friday DAILY unless noted on my home page. I ship most of my items USPS Priority or First Class Mail 1-5 days delivery in the US. Larger items will go FedEx ground 1-5 days delivery in the US. Very Large/Oversized items such as Fenders, Hoods, Etc. will be freighted via Greyhound Express to your closest terminal or can be picked up locally. Please be advised that over-sized items are subject to space availability on the Greyhound Buses so delivery is usually 7-10 days, but can sometimes take closer to 15 business days (3 weeks). Some over-sized items are able to fit under the USPS requirements and can be shipped directly for an additional charge. Please contact us if you would like to know if your item can be shipped directly to you and get a price quote. 

Shipping price stated is for the lower 48 states only. If you are in Alaska, Hawaii, Puerto Rico, Virgin Islands, or any other U.S. Territory, please contact me for shipping quote. Many small items will not need additional postage, but please ask for a quote first. If you purchase an item before receiving a shipping quote, please remember that any additional shipping charges need to be paid before your item will be shipped. Canada and International buyers are welcome but please contact me prior to bidding or buying so you understand the shipping costs. I will combine international shipping costs on multiple items.

Returns

We gladly accept returns. Please contact us before returning any item or there may be a delay in the refund of your payment.  You may contact us through eBay messaging or by phone (507) 726-2808. Items must be returned within 14 days of receiving the item. All sales after 14 days are considered final. Return shipping is paid by the buyer. The buyer accepts a 20% restocking fee or the equivalent of our original shipping costs plus fees if that amount exceeds the 20%.  (Please understand that even though a listing may have offered Free Shipping, we are still charged by the courier. As such our shipping cost will be deducted from the refund if they exceed the 20%)


Electrical items are NON-RETURNABLE for 3 reasons.
#1 - People using the part for testing.
#2 - People installing them on an incorrect machine.
#3 - Our inability to re-test most electrical parts after they have been returned and the machine has already been torn down.
We will not re-sell anything that we can't assure our customers was in working order when they bought it.  

International Buyers

All international bidders are welcome.  We ship most items via USPS Priority Mail to most countries and do not insure their ground service.  With higher priced or large oversized items we may have to use UPS or FedEx due to USPS limitations. This may cause higher shipping costs.  Please understand these extra costs on such items.  If an item does not have a shipping price for your country, please contact us and we can get you a quote.

Import Duties, Taxes, and Charges are not included in item prices or shipping costs.  These charges are the buyers responsibility.  Please check with you country's customs office to determine any additional cost before bidding or buying.  These charges are usually collected by the delivery shipping company or when you pick up your item.  These are not additional shipping charges.

We will NOT mark values lower or mark as gifts - US and International Government policies prohibit such actions!

Feedback and 5 Star Ratings

Benny's Powersports is a small family owned and operated business.  We work very hard to establish and keep a good reputation, and customer service is our #1 priority. We have no interest in short changing anyone in any way at all. With that being said, we are human and do make mistakes. If you feel you cannot leave 5 stars and good feedback for ANY reason, please give us the opportunity to make it up to you. Call us at (507) 726-2808 or email us with your issue. You are our VALUED customer and we will not take you for granted.


 

McLaren talks P13 Porsche 911 fighter

Mon, 27 Jan 2014

McLaren will take a stab at Porsche and Ferrari’s bread and butter segment in the upcoming years. Autocar reports -- after talking with chief executive Mike Flewitt -- that the company is building the a car, codenamed P13, which could be revealed in time for next year’s Geneva Motor Show. Autocar says it will sit below the 12C and well below the freshly driven P1.

SsangYong Korando 4×4 gets cheaper with arrival of the Korando SX

Mon, 18 Jun 2012

SssangYong has dropped the entry price for its 4WD C-Segment SUV Korando with the launch of the Korando SX. SsangYong is the Korean car maker that hasn’t yet quite managed to drag itself out of the bin marked ‘Oh, dear’, but the takeover of SsangYong by the deep-pocketed Mahindra and the launch of the seemingly convincing SsangYong Korando Crossover/SUV last year auger well. The Korando is aimed at cars like the Hyundai ix35 and Kia Sportage, and it seems a decent enough offering in a slightly generic way (even if it is penned by Giugiaro), with a 2.0 litre turbo diesel with a decent enough 173bhp and with a choice of auto or manual, FWD or 4WD.

Jaguar C-X17 concept (2013) full details on new aluminium chassis

Mon, 09 Sep 2013

Jaguar’s C-X17 crossover concept might have show-stopping looks, but it’s what will lie beneath the production crossover – thought to be called QX – that’s just as intriguing: an all-new aluminium platform, dubbed ‘iQ Al’. It’s a clean-sheet design, with double-wishbone suspension up front, and a multi-link axle at the rear. For more unseen location photos and an in-depth feature, pick up the October issue of CAR magazine, out Wednesday 18 September   Jaguar C-X17 crossover concept: the lowdown on the ‘iQ Al’ aluminium platform ‘It had to be a clean-sheet design to reach our goals,’ says Jaguar vehicle line director Kevin Stride.

2040Parts.com © 2012-2024. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.094 s, 11242 u