Find or Sell any Parts for Your Vehicle in USA

2000 Bmw 528i Radiator Cooling Fan on 2040-parts.com

US $115.00
Location:

56310, US

56310, US
Returns Accepted:Returns Accepted Item must be returned within:30 Days Return policy details:Notice, it is completely the buyers responsibility to make sure an item will work for their application prior to purchase. All returns are for store credit only and are subject to the following conditions: 1.) The part(s) bears authentic Slidegood, Inc. markings which appear on all our merchandise. 2.) The part(s) have not been used for non-OEM application including but not limited to; off road use, racing use, swaps, or anything that is different from the original manufacturers intended use. 3.) The part(s) have not been altered, modified, diassembled, overheated or damaged. 4.) The customer has their original invoice. 5.) The part has not been sourced or obtained from a third party. 6.) Absolutely NO returns after 30 days of receiving the item. 7.) Non-defective parts are subject to a 25% restocking fee. Buyer is also responsible for shipping both ways. Refund will be given as:Money Back Return shipping will be paid by:Buyer Restocking Fee:No Make:BMW Model:528i Year:2000 Part Type:Radiator Cooling Fan Mileage:154110 PartsBeast ID:21218 Warranty:Yes Name:2000 BMW 528i Radiator Cooling Fan OEM Part Number:64546921395 VIN:WBADM6342YGU22553

2000 BMW 528i Radiator Cooling Fan

Additional Images

Details

WBADM6342YGU22553 2000
BMW 528i
2/2000
154110 Automatic Transmission
2.8L M52 RWD
Sedan Used
TITAN SILVER METALLIC Black
354 Leather
Radiator Cooling Fan 64546921395
21218

About Us

Slidegood offers quality new and used auto parts for imports. Slidegood, Inc. is a licensed automotive recycler of imports providing genuine OEM parts for; Acura RSX, Acura Integra, BMW M3, BMW M5, Nissan 350z, Nissan 240sx, Honda S2000, Honda Del Sol, Honda Prelude, Honda Civic, Honda CRX, Mazda RX7, Subaru WRX, Subaru BRZ, Lexus SC300/400, AND MORE! We start by removing every part from the vehicle when it arrives at our facility. Parts are then stored in our indoor warehouse. We have hard to find, interior, exterior, engine, wiring, transmission, suspension...etc, even full frames and quarter panels. Everything you see on our website has been inspected and is ready to ship unless otherwise stated. Every part features photos of the exact part you are buying and include a 60 day warranty, so shop with confidence. See the FAQ page for full warranty details. We are warehoused in Central Minnesota and ship worldwide. All parts are eligible for same day shipping unless otherwise noted. Larger items that must go LTL freight such as hatches, quarter panels, and engines may require additional time for packaging.

Return Policy

Notice, it is completely the buyers responsibility to make sure an item will work for their application prior to purchase. All returns are for store credit only and are subject to the following conditions: 1.) The part(s) bears authentic Slidegood, Inc. markings which appear on all our merchandise. 2.) The part(s) have not been used for non-OEM application including but not limited to; off road use, racing use, swaps, or anything that is different from the original manufacturers intended use. 3.) The part(s) have not been altered, modified, diassembled, overheated or damaged. 4.) The customer has their original invoice. 5.) The part has not been sourced or obtained from a third party. 6.) Absolutely NO returns after 30 days of receiving the item. 7.) Non-defective parts are subject to a 25% restocking fee. Buyer is also responsible for shipping both ways.

Warranty Information

Slidegood, Inc. warrants recycled parts we sell for 60 days from the original purchase date. Some of our parts may come with accessories attached. These parts are left on the main part to aid in the installation process, but are not covered in your warranty. IMPORTANT ENGINE WARRANTY INFORMATION Void if conditions are not met. Our engines come with a 60 day parts only warranty unless otherwise stated. This is a part replacement warranty only. Installation and labor costs are not covered, so if the part fails, we will send a replacement part provided all warranty requirements are met (see below for warranty requirements). Engines are sold as a long block only and do not include any accessories or the transmission. Meaning-all engines are sold WITH OUT the Starter, Alternator, Power Steering Pump, Turbo, Supercharger, AC Compressor, Plastic Engine Covers , Wiring harness, Coil Pack, Distributor, Throttle Body, and Main Computer. All other components included are considered convenience items and are not covered by our warranty. Most engines will include Intake Manifolds, Fuel Injectors, Fuel Rails, and Sensors. These items are NOT Guaranteed to be included nor are they covered under our warranty. You should expect to use your existing Intake Manifold(s), Exhaust Manifold(s), Sensors, and Wiring Harness to eliminate complications when installing the engine. Engine Warranty Requirements: -Replace engine oil to manufacturer’s suggested level -Replace oil filter -Flush oil coolers -Replace valve cover gasket(s) -Replace oil pan gasket and main seal -Replace Timing Belt and idler pulley(s) -Ensure motor is timed correctly before installation of motor -Replace Timing Chain if mileage meets manufacture specifications -Replace thermostat and gasket -Flush and inspect cooling system (including radiator) -Install new spark plugs -Install new belts and hoses -Other installation procedures may apply. Contact the vehicle manufacturer for specific installation instructions

Fans & Kits for Sale

Daihatsu to debut three Kopen concepts in Tokyo

Thu, 31 Oct 2013

Three new Daihatsu Kopen concepts have been revealed ahead of their unveiling at next month's Tokyo motor show. The blue and orange concepts are the RMZ model – although they feature slight differences – while the green car is the XMZ model. The concepts measure in at 3,395mm long, 1,475mm wide and 1,275mm tall and, like the recently discontinued Copen, fit into the Japanese ‘Kei' light car category.

Make the McLaren MP4-12C your own with new online configuator

Wed, 31 Mar 2010

We all want to own a McLaren--a lucky few among us actually will. But the rest of us can still dream, design our custom MP4-12C with McLaren's new online configurator and hope for a winning lottery ticket. Anyone can log on at www.mclarenautomotive.com and access the configurator.

Barrett-Jackson to auction commemorative Z06 Corvette for museum fundraiser

Wed, 12 Jan 2011

In honor of the Chevrolet Corvette's inaugural appearance and victory at the 24 Hours of Le Mans some 50 years ago, Chevrolet built a special 2011 Corvette Z06 wearing the same paint scheme--Arctic White paint, blue stripes and the number "3"--to pay tribute to the class-winning 1960 Cunningham Corvette. Chevrolet and the General Motors Design Center built and added several special one-off features for this car, which has vehicle identification number 001: -- Competition Gray headlamps, mirrors and wheels -- Special 50th-anniversary of Le Mans racing logos -- Blue brake calipers -- Z07 performance package with Brembo carbon-ceramic brakes -- 19-inch front/20-inch rear 20-spoke Competition Gray wheels with Michelin PS2 tires -- Magnetic Selective Ride Control -- Black carbon-fiber front splitter and rockers -- ZR1-style rear spoiler -- Ebony leather-wrapped interior with Competition Gray trim -- Carbon-fiber fenders and floor panels Corvette Racing fans will recognize the special-edition Z06 as a participant in the Legends of Le Mans event at Laguna Seca in 2010. Driven by Corvette Racing legend Ron Fellows, the Z06 was accompanied by the 1960 Cunningham, the 1967 Bondurant/Guldstrand, the 1973 BF Goodrich and the C6.R GT2 Corvettes for a parade lap on the track.