Find or Sell any Parts for Your Vehicle in USA

572 Cu In 650hp Bbc Chevy Engine 2016 Onsale 1 Only Dart Splayed Block All New on 2040-parts.com

Location:

Richmond, Virginia, United States

Richmond, Virginia, United States
Condition:New other (see details) Brand:GM Manufacturer Part Number:572 UPC:does not apply



A. R. Racing - Performance
Engine Builders are
Proud to offer For Sale


 DONT MISS THIS SALE PRICE  FOR 2016 WE HAVE JUST   SAVE BIG  LOWEST EVER ADVERTISED PRICE NEW FOR 2016YEAR PRO STREET SERIES ALL NEW ENGINE USING DART SPLAYED BLOCKS BIGBLOCK ENGINES WITH GROUND POUNDING TORQUE AND EXTENDED RPM RANGE 572 CU IN STROKER . THIS STROKER IS GROUND POUNDING  ENGINE FITS WHERE A 454 CU IN WOULD BUT ADDS 100 PLUS CU INCHES.FEATURES THAT YOU DO NOT FIND ON OTHER BUILDUPS!@! FINALLY A AFFORDABLE  ALUM HEAD  BIGLOCKS WITH FULLCASTING  PORTWORK RACE GRADE ALUM  HEADS AS WELL AS  FORGED EAGLE RODS AND PISTONS  .ALL NEW PRO  RECTANGLE PORT HEADS WITH HI FLO INTAKE PORTS THAT ARE NOT TO HUGE ALLOW HUGE LOW RPM AIRFLOW  TO MAKE LOW RPM TORQUE YET PUNCH OUT GREAT HP #S OVER A EXTENED RPM RANGE.  OVER SIZE VALVES  HELP MAKE THE POWER FIGURES OUR HEADS AND MATCHING CAMS AND COMPRESSION RATIOS ARE TRULY  PROVEN POWER COMBOS DERIVED FROM DYNO TESTED COMBOS WITH ACTUAL REAL DERIVED POWER FIGURES.READ THESE OUTSTANDING FEATURES AND SEE WHY WE ARE THE BEST BUILDERS ON THE NET. FORGED PISTONS , ALL FORGED EAGLE RODS,STAINLESS VALVES 2.25 /1.90 FULL ROLLER ROCKERS   PUMP GAS HI TORQUE  FULLY BALANCED/STREET BLUEPRINTED/FILE FIT RING SETS NEW LITE FULL ROLLER STAINLESS ROCKERS FOR OUTSTANDING RELIABLE USE 2 TIMES STRONGER THAN A ALUM ROCKER AND IMPROVED CAM SELECTIONS ..MUCH MUCH  MORE WE HAVE 2 AND ONLY 2 TO SELL DONT MISS THIS ONE DONT ACCEPT ANYTHING LESS!! SOLD LESS CARB DIST AND WATER PUMP
  • 627 hp @ 5800 RPM  622 ft. lbs torque 4200 RPM  572 CU IN CU IN PERFECT SS CHEVELLE TRUCK OR CAMINO REPLACEMENT ENGINE

  • All new internals proffesionally
  • Prepared block
Machine work and parts that set our engines apart
valued at:  $12,895 - Retail cost SALE 9495.00 THRU OCTOBER


Machine Work
  • Select Hi Tin block    machined  565- 572  CU IN 4 BOLT MAIN BLOCK DART MACHINERY BRAND NEW SPLAYED BLOCK 4.6 bore
  • align bore and or check for run out.full race clearancing
  • Mag Check-preasure check ... $40
  • Hot Tank - Jet Wash .... $50
  • Bore Torque Plate Hone ... $125    Torque Plate Gives True Finish
  • Clearance block - -casting flash only n/c..   
  • Dynamic balance assembly.. $125
  • File fit rings - blue print clearance... $90
  • Float - pistons to rods... 
  • Install cam bearings - freeze plugs... $45
  • Port blue print cylinder heads..150.00
  • Final assemble full rotating and top end
    • Parts including final torque - clearance - and geometry of all parts... $200 total labor you could spend 1600.00
All new Performance Internal Parts
  • USA MADE JE/SRP/PROBE  FORGED  pistons10.7 to 1 piston set[ 689.00 PUMP GAS OK   
  • Eagle steel stroker crank all new  torque at low rpm where you need it INTERNAL BALANCE ADD 300.00 TO PRICE
  • Childs & Albert -  zz gapdura Moly File Fit Rings... $159.99 [provides the ultimate in ring sealing making more power!!
  • Durabond - cam bearings... 49.99
  • Eagle  forged steel   rods  399.00 FLOATED LONG RODS MORE TORQUE
  • ARP - wavelock - rod bolts...   $59.99
  • Clevite- -bearings  tri metal 77 - rod and main...  $99.99
  • LUNATI  cams custom  hi output cam lifter set  ..  399.00
  • Cloyes -  true roller set... $59.99
  • Comp - cams cam locks...  $4.99
  • comp cams  xe chrome moly  pushrods 99.99
  • Dyna gear  race - oil pump...  $49.99
  • Dyna gear  - pickup...  $29.99
  • ARP - steel drive...  $13.99
  • After market - oil pan.  baffeld 7 qt   $299.99
  • After market - timing cover...  $19.99
  • pioneer/arp - head bolts...  $59.99
  • ARP/ - rocker studs 7/16...  39.99
  • Fel Pro  RACE - gasket sets...  89.99 - TOTAL PARTS YOU COULD SPEND BUILDING YOURSELF  4400.00 INC HEADS COST BELOW
Power Making Featured Parts
  • ALL NEW PRO RECTANGLE PORT ALUMINUM LARGE  OVERSIZE VALVES AND STAGE 1 PORTS  REGARDED AS THE BEST POWER FOR STREET/STRIP  LOOK AT THESE ADDED FEATURES.  Bowls blended,  ...  $1758  330 RUNNER VOLUME
    • Features -  - -severe duty STAINLESS 2.25/1.90 valves plus ...  1.50  springs 10  degree super locks comp cam parts..good  porting..7/16studs guide plates.gasket match p.c seals.chrome moly retainers.. YOU NEED THIS SIZE VALVE TO MAKE THE POWER ALONG WITH THE CAM!!
  •  hi perfromance RELIABLE STAINLESS ROLLER    rockers-1.7 ratio...  $249.99
  •  custom series- -muscle car cam RADICAL IDLE YET FAST THROTTLE RESPONSE HOW MANY ENGINES HAVE THAT !!.MAJOR LOW RPM TORQUE WITH EXTENDED RPM RANGE[1800 THRU 5600] MATCHING POLISHED HI RISE INTAKE OR WEIAND 
  • Features - 110 center line 627 - 627 lift corrected 1.7 ratio = .  245/245 dur @ 050 awesome power  range   2000 stall.   REAL muscle car idle. 100% streetable and will run vacum access  
    • Total parts and labor value = $12895 average retail cost
      • You could spend more by building on your own!
    • primary use hi performance pump gas street
  • Characteristics - built with corret balance of power and easy maintenance,we carry the matching carb and show polished dist e-mail for fit and tech DONT SPEND THE 12,000 PRICE TAG YOU SEE ADVERTISED ELSEWHERE.  THIS ENGINE IS SOLD LESS CARB AND DIST.avg ship cost 190.00 and above and  paypal and credit cards . paypal disclaimer[our products] are sold for hi-performance use and are sold as is .e-mail or call 540-439-1961 for tech or info                                  

all rights reserved
copyright 2013




.
























Citroen Celebrates 80 Years Of The Traction Avant

Tue, 29 Apr 2014

FRENCH car maker Citroen is celebrating 80 years of its iconic Traction Avant in 2014 with a series of events dedicated to the famous model. Launched in April 1934, the new model – originally christened 7A - revolutionised the automotive world with its low centre of gravity, all steel monocoque body, light weight and radical aerodynamics. As a result, the front-wheel-drive Traction Avant boasted standard-setting characteristics for handling and road holding.

Range Rover Evoque launches in India at £60,000

Sun, 06 Nov 2011

Range Rover Evoque launches in India Yes, a starting price of around £60k for a Range Rover Evoque in India seems rather steep (and that’s plus Octroi – local sales tax). After all, in the UK you can jump in to an Evoque from a shade under £28k (for the 2WD Evoque eD4 Pure), and even the top of the range Evoque Si4 Dynamic with an auto ‘box comes in at just £40k (until you dive in to the options, and then it’ll be nearer £50k). So what’s going on with the Evoque in India?

Brussels Motorshow 2008

Thu, 24 Jan 2008

By Graeme Dykes Motor Shows 24 January 2008 23:29 Running from January 17th-27th, the Brussels Motorshow is probably the first European motorshow of the year. Comparisons with Detroit are perhaps unfair but almost inevitable. There was certainly plenty of glamour with Ferrari, Maserati, Porsche and Lamborghini amongst the exotic participants.