Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ... Brand:Alpine Voice Coil:Dual Model:SWR-12D2 Speaker Size:12in. MPN:SWR-12D2 Size:12 RMS Power:1000W Enclosure Included:No Type:Woofer(s) RMS Wattage:1000 UPC:793276011794

All Alpine Woofers that Sound Wholesalers sale and ship are 100% Brand New product, Sound Wholesalers "DOES NOT" Sell "Refurbished" or "Rebuilt" Woofers as new.

Our Alpine Woofers have a full 1 Year Warranty, this includes Woofers that have been 'Blown" however, please understand Physical Abuse as in holes poked into the woofer or a woofer that has had an object rubbing against it or any type of physical damage is not covered under the stated warranty period, Warranty coverage is through Sound Wholesalers, NOT the manufacture.

It is recommended that you allow your new Alpine SWR Sub woofers to have a "Break In" period of 3 - 7 days of moderate listening levels, this will allow the Voice Coils to correctly seat and break in during the heating and cooling process, this will allow many extra years of enjoyable music from these Amazing Subs.

Alpine SWR-12D2

Type-R 12" subwoofer with dual 2-ohm voice coils

Maximum bass output

Alpine's Type-R subwoofers will bring big bass to just about any vehicle. The SWR-12D2 12" sub features a cone made from Kevlar® treated pulp

— the same material used to make bulletproof vests — and its durable HAMR Santoprene™ surround allows for huge amounts of excursion.

This sub was built for bassheads that want the best of both worlds: accurate response and otherworldly thump.

Bring on the power

The SWR-12D2 can handle an astounding 1000 watts of RMS power, so be sure to choose a suitable amplifier as these bass monsters definitely

want lots of power. Its dual oversized 2-ohm voice coils offer the wiring flexibility you'll appreciate as your system changes and grows, so you can

always pull maximum power from your amp. It works well in sealed and ported enclosures so you can choose what kind of bass you want to hear and feel.

Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible.

To drive this single subwoofer, we recommend a mono amplifier rated between 750 and 1500 watts RMS at 4 ohms.

Product Highlights:

12" subwoofer with dual 2-ohm voice coils
Kevlar reinforced pulp cone with HAMRS Santoprene rubber surround
frequency response: 24-200 Hz
power handling: 300-1,000 watts RMS (500 watts per coil)
peak power: 3,000 watts
sensitivity: 84.7 dB
top-mount depth: 6-3/8"
sealed box volume: 0.75-1.00 cu. ft.
ported box volume: 1.25-1.50 cu. ft.
warranty: 1 year

Features

Kevlar Reinforced Pulp Cone: This Alpine Type-R subwoofer has a two-piece structural parabolic Kevlar reinforced pulp cone. Kevlar adds strength

and tear resistance to the woofer cone while maintaining the benefits of a pulp cone design. There is also an oversized inverted poly-mica dust cap,

which increases rigidity and virtually eliminates cone distortion at extreme volume levels.

HAMRS: The woofer features a High Amplitude Multi Roll Surround (HAMRS), made of Santoprene, that allows a large linear excursion and greater

SPL. The HAMRS design allows extreme excursions without sacrificing valuable cone area.

Progressive Spider: The progressive Conex spider has reinforced layer tinsel leads to ensure reliable and consistent control of the tinsel leads and

eliminate any mechanical noise or interference often seen in high excursion cone designs.

Compound Radius Curve Pole Geometry: Alpine's Patented Compound Radius Curve pole geometry ensures a symmetrical magnetic field, while

optimizing flux density to reduce distortion and further improve power handling and output.

Oversized Voice Coil: The oversized (65mm), high-temperature, 4-layer dual voice coils offer increased power handling to 1000W RMS / 3000W Peak.

Dual Voice Coils: For system flexibility, the woofer has two 2-ohm voice coils. When the voice coils are wired in parallel, the woofer presents a

1-ohm load. When the voice coils are wired in series, the woofer presents a 4-ohm load.

Spring Terminals: The spring post terminals are all located on one side of the woofer. The terminals will accept bare wire up to 8 gauge, pin connectors,

or banana plugs.

Jumpers: Included with the woofer are two voice coil terminal jumpers. These jumpers allow you to easily wire the voice coils in parallel

(for a 1-ohm load) or series (for a 4-ohm load).

Enclosure Compatibility

Sealed Box Volume: The recommended sealed box volume ranges from 0.65 cubic feet to 1.1 cubic feet, with 0.85 cubic feet being the ideal size.

Ported Box Volume: The recommended ported box volume ranges from 1.1 cubic feet to 1.6 cubic feet. The ideal size is 1.48 cubic feet, using a

slot port measuring 12-1/2" (W) x 1" (H) x 19" (L).

Lotus Evora GTE road car heading for Europe

Sat, 03 Sep 2011

Lotus Evora GTE - going on sale in Europe after Frankfurt debut We’ve decided we weren’t really on the ball with the Lotus Evora GTE at Pebble beach. Yes, we reported the most powerful Evora yet was heading to Monterey, but we assumed it was just another limited run Lotus. Turns out, apparently, that Lotus intended the Evora GTE would only be sold in Asia.

Who's Where: Felix Kilbertus appointed Fiat chief exterior designer

Tue, 24 Jun 2014

Felix Kilbertus has been appointed Fiat's chief exterior designer. Kilbertus' move sees him cross Turin, from his previous position as a lead designer at Pininfarina, to Centro Stile. In his new role he is responsible for the exterior design of Fiat-branded passenger vehicles.

Enthusiast 3D prints an Aston Martin DB4

Thu, 01 Aug 2013

New Zealand enthusiast Ivan Sentch is in the process of 3D printing a 1961 Aston Martin DB4. Engadget reports that he bought a $499 Solidoodle 3D printer and has been working on this project since December 2012. Using a Nissan Skyline as a donor car, he'll make a fiberglass mold of the print and hopefully transform this thing into a drivable, street-legal car for a fraction of the cost of an authentic DB4.

Alpine Swr-12d2 Sub 12" Dual 2-ohm Type-r 3000 W Pro Loud Subwoofer Speaker New on 2040-parts.com