Bosch 65lb (650cc) High-impedance Fuel Injector on 2040-parts.com
Akron, Ohio, United States
|
Bosch 65lb/hour 650cc with EV6 / USCAR Connector – 0280158117-650 Genuine Bosch High Impedance Injectors These injectors flow 65 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector. These injectors represent the most current Bosch engineering and are used on many high power oem applications. These injectors are able to function at high fuel pressures and dont exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. Many tuners push these injectors to 6 bar and higher. Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors pencil stream high flow injectors; these High Flow injectors utilize a multi-orifice tip for improved mixture preparation and atomization. This results in lower BSFC and better idle quality than many injectors with less flow. Features: Genuine, reliable Bosch Injectors Excellent response characteristics Robust Design High Impedance Low Impedance performance characteristics with High Impedance Compatibility Specifications: Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers) Spray Pattern: Wide Split Cone, (6 orifice) Electrical Connector: USCAR (New-style V=EV6 / Oval / LS2) Fitted with Viton upper and lower o-rings. Static Flow Rate @ 43.5PSI (300kPa): 65 lb/hr = 6.52g/s = 650cc/min Overall Length: 65.5mm Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline Applications: Perfect for 2V, 3V, 4V head applications looking for a high flow, wide dynamic range injector with superb idle quality Cross Reference: Bosch 0 280 158 117 (0280158117-650) |
Fuel Injection & Pumps for Sale
Magnafuel 300 fuel pump(US $125.00)
Delphi fe0196 electric fuel pump motor very good(US $119.89)
Cv products cv2508 billet fuel pump sbc pro - dirt late models(US $229.99)
Enderle mechanical fuel injection enderle # 110 alcohol fuel pump trailer spare
Fuel injection carbon fiber stacks
Erikc 0 928 400 617 /0928400617 injector metering valve set fuel pressure sensor(US $32.00)
Audi Sport Quattro Concept grips the 2013 Frankfurt Motor Show
Tue, 10 Sep 2013Audi has revealed the Sport Quattro Concept here at the 2013 Frankfurt Motor Show – 30 years after it first showed the original Sport Quattro at the same Frankfurt show in 1983. A retro-inspired but thoroughly high-tech concept, it packs a 700hp V8 plug-in hybrid engine for explosive performance that has an unexpected green twist, too.
Porsche 911 Turbo (2010) unveiled
Fri, 07 Aug 2009By Ben Pulman First Official Pictures 07 August 2009 10:14 This is Porsche’s new 911 Turbo, with an enlarged and twin-turbocharged engine producing more power, plus the option of a twin-clutch gearbox that features proper gearshift paddles. Unbelievably, it’s the first entirely new engine in the 35-year history of the Turbo. Essentially it’s the same direct-injection 3.8-litre flat-six that you’ll find in regular 911s, but now fitted with variable geometry twin turbos to give a healthy 493bhp, a 20bhp increase over the current car.
Mini Paceman
Fri, 14 Sep 2012Mini has presented its latest model, the Paceman, as it ventures into a new vehicle class. Appearing – almost to the millimeter, bar colour and trim detailing – to be the Paceman concept seen at NAIAS 2011 in Detroit, the Paceman Sports Activity Coupe features many traditional Mini design cues. Where it moves away from them, it is in keeping the new-style squared off front lamps of the Countryman (with which it shares a front end up to the base of the windscreen) and a roofline which tapers down much more than we've seen in any previous ‘new' Mini before.