Brodix 227 100% Cnc Cylinder Heads on 2040-parts.com

Selling a complete top end small block chevy package:
Heads: 23* Brodix 227 100% CNC heads. Heads were shipped down to Speire Racing Heads in Hayes, Kansas and got an upgrade. NEVER been milled on either surface-virgin castings
 
Larger Valves were installed 2.125intake 1.600 exhaust
Runners were laid back to increase velocity/efficentcey with larger valves
Chambers/runners were smoothed to eliminate hot spots, and promote better/faster air flow
Just got back from having new valves, new springs set up for .700 lift solid roller cam ) or smaller lift roller). New valve locks/keepers, new valve guides, standard valve job, and I had him flow test them since I planned to sell and wanted to be sure buyer knew what they were getting and that they were ready to bolt on and go.

Edelbrock Super Victor intake manifold that Speire also ported and smoothed out runners to work better with heads. The heads are plumbed for front/back/center cooling and I will send the 2 additional braided lines to connect to thermostate housing and plumb into center of heads. Intake will already have front to rear ss braided lines installed

Jessel Sportsman shaft rockers, 1.5/1.5 and all hardware to reinstall on these heads. Rocker pairs are etched on where they will go back on each head

I'll also send along a set of Crower Severe Duty roller lifters, these are offset lifters that need to be ran with these heads due to port size/layout. You can send them in to get checked, or rebuilt as a back up, but I no longer need them so a guy can do what he wants, throw them in the scrap metal bin..whatever.

Stock these parts made 600hp/570tq on my 11.8:1 427 SBC that ran pump gas and I used a small .628 solid roller since I street drove it and didn't want a valvetrain eater. After head work and porting it picked up 40hp/30tq with no other change (have youtube video) but the hp didn't do it justice as the car gained a solid .5 in the 1/4mi

These HEADS ALONE, STOCK of the box current sell in summit/jegs and various other vendors for $2900, then add super vic intake, send out to get that ported, then add jessel sportsman shaft rockers and you can see this is a heck of a deal to make a lot of power.

Will ship, but buyer to pay for ride of everything and will be using UPS Ground services if shipping required. Cash, check- but check will have funds cleared before releasing heads for shipment.

Please feel free to contact me with any questions, or contact Chad at Spiere Racing Heads to double check validity of these parts. I sent them in so he could make sure new owner can bolt them on and go without paying his shop to double check anything. Racers always treated me great buying their parts and I've always made sure everything I've sold over the year is legit as well. Racing is expensive enough without getting screwed over by crooks.

Items are also locally listed so auction may end at any time.