|
MOTEC C125 Colour Display - With Logging
|
The C125 is an exciting addition to MoTeC's new range of colour Displays and Display Loggers. Striking in design and powerful in functionality, the C125 offers display, data logging, auxiliary control and programmable LEDs all in one compact device.
The vivid 125mm screen (approx 5'') is high resolution, ultra bright and anti-reflective for easy reading in direct sunlight. Numerous selectable layouts are provided with superb graphics that cater for day and night viewing. Within these layouts users can configure the channels and labels to suit their application.
An array of ten full colour LEDs is integrated into the unit for use as shift lights, warning lights or other driver alerts. The colour, function and intensity of each LED is programmable, allowing users to develop their own unique strategies and sequences.
The C125 is available standalone or as part of MoTeC's C125 Race Kits.
BASIC SPECIFICATIONS
Display
•Screen: Colour TFT LCD, anti-reflective
•Resolution: 800 x 480, anti-aliased graphics
•Selectable fixed layouts with channel and label configurability
•48 user-defined, scrollable message lines with programmable overrides
•3 programmable 'pages', for example Practice, Warm-Up, Race
Communications
•2 x Configurable CAN buses with individually programmable CAN bus speeds
-One can be used as RS232 Receive
•RS232: 2 x RS232 ports
-One with Transmit and Receive
-One with Receive only
Physical
•Dimensions 134.5 x 103.9 x 20.2 mm excluding connector
•Weight 360 g
•1 x 34 pin waterproof connector
Logging
•120 MB logging memory
•Logging rates up to 500 samples per second
•Fast Ethernet download
•Includes i2 Standard data analysis software (i2 Pro available as an upgrade)
Inputs (optional - requires I/O Upgrade)
•6 x analogue voltage inputs
•2 x analogue temperature inputs
•2 x digital inputs
•3 x speed inputs
Outputs (optional - requires I/O Upgrade
•4 x low side outputs
-PWM or switched operation
Internal Sensors
•3-axis G sensor
•Dash temperature sensor
•Sensor supply voltage
•Battery voltage
Expanders
•Compatible with MoTeC E888 and E816 Expanders, providing full functionality.
|
General
•Full colour display, logger and controller all-in-one eliminates the need for separate devices (I/O and logging optional)
•Includes a built-in array of 10 programmable, multi-coloured LEDs for shift lights and other driver alerts
•Impressive 125mm full colour LCD screen (approx 5'') - ultra bright, high resolution and anti-reflective for easy viewing, even in direct sunlight
•Configurable channels and labels allow comprehensive customisation within the supplied layouts
•Supports Wideband Lambda from MoTeC PLMs or LTCs, using Bosch LSU or NTK UEGO 5 wire sensors
•Can be used standalone or in conjunction with other electronic devices including MoTeC CAN-based Expanders
•Also available in cost effective C125 Race Kits which include a plug-in loom with power adaptor, buttons, GPS and optional ECU adaptors
-Display-only and Logging Kits available
Logging and Analysis
•120 MB internal data logging
•Fast download via Ethernet
•Accommodates over 300 channels derived from a mixture of analogue and digital inputs, RS232 and CAN data channels (optional I/O upgrade required for analogue and digital inputs)
•Configurable to use sensors from some existing engine management systems, including factory ECUs via OBD-II (adaptors required, sold separately)
•Data analysis with i2 Standard software (included) or optional i2 Pro with the Pro Analysis Upgrade
Display
•Numerous selectable layouts supplied, including an RPM sweep, RPM dial and a multi-value style ideal for the dyno or warm up
-Each is available in four colour variations (red, green, blue, white)
•Configurable channels, measurement units and warnings
•48 user-defined alarms, for example Low Oil Pressure, Low Fuel, Fastest Lap
•Programmable overrides - particularly useful for showing values such as lap times
•All layouts include a multi-purpose, zero-centred bar graph primarily for Lap Gain/Loss but can be configured for other purposes such as Fuel Level, G-Force (Lat or Long) and Steering Angle
-Can be turned on or off
•Three programmable 'pages' enable users to tailor layouts for different scenarios, for example: Dyno, Qualifying, Race, Driver 1/Driver 2
-Ensures only the most relevant information is displayed at any given time
|
The following upgrades are available for the C125 Display Logger and may be enabled at the time of purchase or any time later when the need arises.
Pro Analysis
Provides access to advanced i2 Pro data analysis software with multiple graph overlays, X-Y plots, advanced maths functions, synchronised video (automatic alignment), and flexible layouts to accommodate virtually any user preference.
I/O Upgrade
This upgrade activates additional C125 inputs and outputs. It allows for:
•Wiring of sensors into the C125 using either a custom loom or MoTeC's pre-wired C125 I/O Loom. This professional quality terminated loom adds 6 analogue voltage inputs and 2 analogue temperature inputs.
•Use of 2 digital and 3 speed inputs. These are already pre-wired into the button lead of the C125 Terminated Loom.
•Use of 4 auxiliary outputs; these will require custom wiring.
|
C125 Dash Manager Software
The Windows-based Manager software is designed for setup and management of the display and data system. It provides:
•Configuration of the inputs, outputs, LEDs, display, data logging and calculations
•Offline generation of a configuration file that can then be sent to the C125
•Channel monitoring
•Firmware updating
•Extensive help screens
i2 Data Analysis Software
•Analyse logged data quickly and efficiently
•View data from the C125's internal log memory numerically or graphically to evaluate the health and performance of the vehicle and to assess driving technique
•Monitor various parameters in order to make improvements to performance and maintain vehicle reliability
Note: i2 Standard data analysis software is included with C125 Data Logging option. i2 Pro can be used by purchasing the Pro Analysis Upgrade.
|
C125 Race Kits
The C125 Colour Display Logger is available as a standalone device or as part of a complete kit including 10 Hz GPS, pre-wired buttons and plug-in looms. This is a simple, cost effective way of buying and installing a race-ready colour display/data system.
See our listing for:
•C125 Race Logging Kit
•C125 Race Display Kit
C125 to ECU Adaptor Looms
These looms quickly and easily connect the C125 and C125 Race Kits to factory and aftermarket ECUs. An additional cable/adaptor may be required in conjunction with the RS232 adaptor for some ECUs.
C125 I/O Loom
A professional quality, terminated loom that can be used to add inputs and outputs to the C125.
Note: As standard, the C125 does not include I/O. To use this loom the C125 I/O Upgrade is required.
Communication Cables
To configure the C125, a communication cable is required to connect to a PC. An Ethernet cable should be used to connect to the Ethernet port on the PC.
Note: An Ethernet Communications Cable is included with the C125 Race Kits.
GPS
GPS units can be used with the C125 for speed, position, track mapping and lap timing, plus date, time and GPS statistics.
Note: A 10 Hz GPS is included with the C125 Race Kits.
Lap Timing
GPS units are often utilised as a cost effective method of lap timing (see above). The MoTeC BR2 Beacon Receiver is an alternative.
Sensors
Lambda sensors, position sensors, force and motion sensors, pressure sensors, temperature sensors and speed sensors.
Expanders
MoTeC's E888 or E816 Expanders can be connected to the C125 with full functionality.
|
MoTeC’s professional, race-grade electronics are sophisticated and therefore it is highly recommended that installation is performed by a professional installer. It is NOT advised for the average installer. An advanced understanding of electrical systems is necessary. Fischer Motorsports will support all sales and also offers professional grade wiring harnesses and installation services for all applications. We have 10+ years of professional race experience based upon MoTeC control and specialize in Power train, Chassis, Drivetrain, and Data programming both at our facilities, onsite customer dyno/track support, or even remote support. Please remember that if you cannot find the time or finances to do the job right the first time, you will ultimately end up looking for time or funds to do it over again. Select us or find a qualified installer, it will ultimately increase your results and minimize future expenses or downtime related to improper setup or installation.
|
|
PAYMENT - SHIPPING - RETURNS
|
|
We Accept The Following Forms of Payment
For fast shipments, please pay for the item after purchase. For Buyer/Seller protection, we will only ship to CONFIRMED addresses. Please, SERIOUS buyers only!
Shipping
Most of our items ship same day. If we expect an item to take longer than three business days to ship we will let you know. International shipments may take up to five business days to ship.
Please see the eBay shipping calculator for an exact shipping quote to your location.
We use UPS Ground for quick domestic delivery with tracking numbers.
PLEASE CONTACT US BEFORE BUYING FOR INTERNATIONAL SHIPPING APPROVAL. We will gladly combine shipping for multiple items!
Returns
All sales are final. None of our items are returnable or refundable unless approved by Fischer Motorsports.
A Return Authorization may be issued in certain cases where Fischer Motorsports authorizes a return, refund or exchange. All returns and cancellations will be charged a 20% re-stocking fee. You must contact us via email and request for your case to be reviewed.
RA numbers expire 15 days after they are issued. Items returned without an RA number or using an expired RA number will be refused.
|
Please Visit Our eBay Store Or Contact Us For All Your MoTeC Needs
|
|
|
|
