Store Categories
- Air Springs & Air Bags
- Air Fittings, Airhose & SpeedControllers
- Pressure Switches
- Air Bag Control Arms
- Air Bag Valves
- Air Bag Brackets & Spring Pocket Eliminators
- Filters, Valveheater, Oiler
- Compressors
- Genuine Blue Box Ford Parts
- Air Cylinders
- Air Shocks
- Strutt Mounts
- Engine Dress Up
- Coilovers
- Axle Flip Kits
- Axle Relocators
- Ball Joints
- C Notch Kits
- Lower Control Arms
- Keyways Lowered/Lifted
- Lowering Bumpstops
- Lowering Hangers
- Lowering I-Beams
- Lowering Leaf Springs
- Lowering Shackles
- Lowering Shocks
- Lowering Spindles
- Pinion Shims
- Shock Extenders
- Tierod Extenders
- Lifted Truck Suspension
- Keyways Lifted/Lowered
- Balljoint Spacers
- Hiboyz Lifted Suspension
- Leveling Kits, Coil Adjusters
- Lifted Control Arms
- Lifted Blocks
- Lifted Body Spacers
- Lifted Brake Lines
- Lifted Flip Kits
- Lifted Hangers
- Lifted I-Beams
- Lifted Leaf Springs
- Lifted Link Suspension
- Lifted Reservoir Shocks
- Lifted Shackles
- Lifted Shocks
- Lifted Spindles
- Lifted Steering Arms
- Lifted Tie Rods
- Limit Straps
- Steering Extender
- Caddy Light Buckets
- Cowl Induction Hoods
- Euro Tail Lights
- Fenders
- Handle Relocater Kits
- Hood Scoops
- Light Kits
- Sport Mirrors
- Steel Bumpers
- Steel Rollpans
- Tail Light Fillers
- Wheel Tubs
- Billet Accessories
- Brake Lines
- Brake Rotors
- Convertible Truck Kits
- Differential Covers
- Fire Extinguishers
- Gullwing Door Hinges
- Lambo Door Hinges
- Shaved Door Handle Kits
- Suicide Door Hinges
- Towing Hitches
Store Newsletter
1 Gallon DeadSpray BK Acoustic Dampning Liquid Vibration Damping Sound Deadener
Product Description
Product Features
| Description: | This is for 1 Gallon Only!
DeadSpray BK
DeadSpray BK is an economical, asphalt-based viscoelastic, sprayable liquid sound damper. It has been found to be highly effective in reducing vibrational resonance conditions in structures such as stainless steel sinks and other plumbing fixtures, sheet metal panels, floor housings, and a multitude of other applications.
DeadSpray BK dissipates structure-borne vibrational energy and reduces radiated air-borne noise.DeadSpray BK is resistant to water, acids, alkali and corrosive gasses. It exhibits exceptional aging characteristics.
DeadSpray BK offers an efficient and effective alternative to sheet applied damping materials.DeadSpray BKcan be sprayed or brushed directly from the drum without thinning. After application, DeadSpray BK cleans up with mineral spirits.
A typical setup to spray DeadSpray BK consists of a 30:1 airless pump, a reverse-aclean airless gun with a tip size of 0.021”, a ram and a surge tank. DeadSpray BK exhibits exceptional adhesion to a variety of materials when properly applied, and is dry to touch in approximately one hour. KEY ATTRIBUTES OF DeadSpray BK Sound Deadening Properties – OBERST BAR (SAE J-1637) METHOD - Composite Loss Factor of 0.020 @ 250 Hz, 77 F (25 C). Steel thickness 32 mils (0.8 mm). Coating thickness 32 mils (0.8 mm). Cold adhesion – when DeadSpray BK is applied to a 10” x 10” x .035” panel of primed cold rolled steel at the rate of 0.5 lbs./sq. ft. (dry weight), shows no loss of adhesion when subjected to two 25” lb. impacts from a two inch diameter, 1 ¼ lb., steel ball at -20F. APPLICATION Surface may be either clean or oily, but should be free of foreign matter. Adhesion is very good on stainless steel, unprimed cold rolled steel, as well as bonderized steel, primed steel, wash-primed galvanized sheet metal, and wash-primed aluminum. Airless spray mastic type equipment is recommended for application. Airless Spray - 0.021” to 0.043” spray tip, ¾” i.d. material hose, a Graco Bulldog Pump 30:1 ratio or higher. DRYINGRecommended application thickness is 32 to 64 mils depending on metal thickness. Product will be dry to touch in 30 to 60 minutes. Cure time is 16 to 24 hours. THINNING Product is ready for use as received. If conditions should require thinning, use mineral spirits sparingly. CLEAN-UP After use, equipment may be flushed with mineral spirits. STORAGE Store and use in ventilated area, away from all ignition sources. If separation should occur, agitate mildly. PHYSICAL PROPERTIES (TYPICAL)
Flash Point 50 F (10 C), Red Label
WARNING: FLAMMABLE MATERIAL. CONSULT MSDS BEFORE USE.
|
|||||||||||||||||||||||||||
| Manufacture: | DeadBarrier | |||||||||||||||||||||||||||
| MPN: | Spraydead Deadbarrier Deadner Paint on | |||||||||||||||||||||||||||
| Weight: | 6Lb(s) *Weight is not exact. | |||||||||||||||||||||||||||
| Black | ||||||||||||||||||||||||||||
| 2016-07-01 | ||||||||||||||||||||||||||||
| UPC#: |
Product Condition
Product Condition
| Listed By: | Aaron |
| Condition: | New Other - A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller's listing for |
| These are New From the manufacture just overspilled on the container with no label. But new not old stock. | |
| Grade: | A - brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable).Packaging May Show signs of handling and storage. |
| Packaging Type: | No Retail Packaging |
| Warranty: | 30 Day Warranty |
Check our other liquidated items
Terms of Sale
