**This Product uses the PRO RGB app and will work together with any other product we sell which uses the same app**

 

This is a complete plug and play kit which includes 4 or 8 rock light pods, a bluetooth controller, flat & curved rubber mounts, mounting hardware & wiring instructions.

A rocker switch and in-line fuse is recommended but not included in this kit.

 

These are our 2^nd generation rock lights. These are 4 times as bright as our gen 1 series with 4 times the amount of LED chips per rock light pod and a wider viewing angle!

These gen 2 rock lights also come with the turn signal and brake light integration just like our dual bluetooth controller for our whip lights. This controller allows you to integrate your turn signals and brake lights into the rock lights. For example:

When you have a pattern going on the rock lights and you hit the brakes, all rock lights will light up bright solid red (or blink or strobe if you choose) then go back to your pattern when you release the brakes. When you flip your turn signals on, right or left, the rock lights on that side will pause their pattern and start flashing amber (or red if you choose) till the signal light turns off then your pattern will resume. (Your vehicle MUST be already equipped with turn signals for this function to work)

 

These new rock lights also utilize a new wiring design, and each rock light has an in and an out so the wiring daisy-chains from one pod to the next instead of wires from each pod individually having to go back to the controller.

 

Features:

- RGB color CHASING! 178 different modes

- 24 LEDs per pod

- Multiple colors shown at the same time.

- 500,000 single color options

- Extremely bright!

- Top of the line high quality design

- Bluetooth IOS and Android controlled

- IP67 waterproof rating

- Quick connecting plugs for easy installation & removal

- Red Wire – 12v +

- Black Wire – Ground -

- Green Wire – Left Blinker +

- Yellow Wire – Right Blinker +

- White Wire – Brake Light +

 

 

These rock lights use the same "Pro RGB" app as our whip lights and will pair together from inside the app and everything will chase together at the same time.

 

Specifications:

• You must power these rock lights with DC12v ONLY DO NOT use over 14v, otherwise you will destroy the rock lights and controller. (This is NOT covered under warranty)

• Power: 4pc kit-12w, 8pc kit-24w