• Product Descriptions
  •  Fitment:3/8'' Marine Stainless Steel Quick Release Boat Fender Holder Kit Boat Rope
  •  
  •  
  • Function:This is must-have accessory to tightly attach the fender or something other on your boat, with this tool you can never worry about knot tying and excess rope again.
  •  
  • Easy Operation: One hand operation designed, click and push to insert in, click and pull to release out. 3/8 inch holder designed to use with 3/8 inch receiver(receiver not included).
  •  
  •  

    • VT-MOTOR

    Professional auto parts

    3/8'' Marine Stainless Steel Quick Release Boat Fender Holder Kit Boat Rope

    Product Descriptions


    Fitment:3/8'' Marine Stainless Steel Quick Release Boat Fender Holder Kit Boat Rope

     

     

    Function:This is must-have accessory to tightly attach the fender or something other on your boat, with this tool you can never worry about knot tying and excess rope again.

     

    Easy Operation: One hand operation designed, click and push to insert in, click and pull to release out. 3/8 inch holder designed to use with 3/8 inch receiver(receiver not included).

     

     

    316 Stainless steel: Provide improved ultimate corrosion resistance than 304 stainless steel, Superior durability to endure long time soak in the salty sea water or fresh water. Anti-wear designed to reach a long time use.

     

     

    Features:

    Dentless Tip provides a buffer between holder and receiver, effectively protect the receiver out of wear and tear. Hand-polished soft edges, passivated and soft-edged top, tip and tab. Protects your rope and fender mount from wear and scratch.

     

     

    Perfect Design:

    1. One quick-release button of the cleat allows you to quickly and effortlessly dock and undock with single hand.

    2. Simply click the button, drop the pin into the receiver and you’re ready to go.

    3. The cleat would attach the fender tightly to your boat.

    4. No worry about knot tying and excess rope again. Indispensable accessory on your boat.

     

    Installation Tips:

    1. Before installing the receiver, please using the Locator Disk and mark dead center of the receiver with a pencil.

    2. Be sure to check that there are no structural members, cables, etc. behind the drilled holes.

    3. Always finish drilling from the outside. This will minimize the risk of damaging the gelcoat.

    4. Hole diameter: ⌀ 1/2" Receiver = ⌀ 1" Hole; ⌀ 3/8" Receiver = ⌀ 3/4" Hole

     

    Installing the Receiver:

    1. Clean inside and outside surfaces.

    2. Screw install tool into the brass nut plate.

    3. Remove protective film from adhesive tape.

    4. Pivot nut plate, insert in hole, pivot back and pull several times to adhere tape on back side of fiberglass.

    5. Unscrew install tool.

    6. Apply marine grade silicone to underside of receiver head.

    7. Apply Loctite to receiver threads, screw into brass nut plate and tighten with Allen wrench.

     

     

     

    Package Included :

     

    1 pcs Quick Release Boat Fender Holder

     

     

    Satisfaction Guarantee:

     

    If you're not satisfied with the tool, simply return for a full refund in 60 days or get a replacement during 1Years' warranty via our customer service.

     

     

     

     

     


    Item Specifics
    Brand VT-MOTOR
    Manufacturer Part Number VTQP00001151
    Warranty 1 Year
    Type 3/8'' Quick Release Boat Fender Holder
    Fitment Fit 3/8 inch Receiver
    Meterial 316 Stainless Steel
    Country/Region of Manufacture United States
    Items Included 1 pcs Quick Release Boat Fender Holder

    Payment

    1. Payment methods accepted: Payoneer.  Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.

    2. Please make sure your Ebayaddress is correct  before you pay, cause it cannot be changed once the order shipped out.

    Shipping

    1. Item will be shipped out within 1-2 business day after clear payment received.

    2. Please make sure shipping address on your ebay account is correct & up-to-date.

    3. Please feel free to contact us by email if you cannot get your order in time.

    Returns

    We offer a 60-day money-back guarantee, as long as the item has not been installed on a vehicle and in the same condition when purchased. 

    The process for returns: 

    1. Contact us via eBay with any concerns or issues with the product you received.

    2. Begin a Return Request on your eBay account. 

    3. You will be sent a return label via eBay.

    Contact Us

    We  maintain high standards of excellence Four 5-star rating

    and strive for 100% customer satisfaction! 

    If you are not satisfied with our product or our Service,please feel free to contact us

    immediately BEFORE you leave neutral or negative

    feedback, we will try our best to resolve any problem and make you satisfied.

     

    Please contact us via ebay using"Contact member". 

    We will respond within 1 business day or less.

    Thank you for your understanding.

     

    Our office hours is as below :

    - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday

     

    We will respond within 1 business day or less.

    VT-MOTOR

    Professional auto parts

    3/8'' Marine Stainless Steel Quick Release Boat Fender Holder Kit Boat Rope

    Product Descriptions


    Fitment:3/8'' Marine Stainless Steel Quick Release Boat Fender Holder Kit Boat Rope

     

     

    Function:This is must-have accessory to tightly attach the fender or something other on your boat, with this tool you can never worry about knot tying and excess rope again.

     

    Easy Operation: One hand operation designed, click and push to insert in, click and pull to release out. 3/8 inch holder designed to use with 3/8 inch receiver(receiver not included).

     

     

    316 Stainless steel: Provide improved ultimate corrosion resistance than 304 stainless steel, Superior durability to endure long time soak in the salty sea water or fresh water. Anti-wear designed to reach a long time use.

     

     

    Features:

    Dentless Tip provides a buffer between holder and receiver, effectively protect the receiver out of wear and tear. Hand-polished soft edges, passivated and soft-edged top, tip and tab. Protects your rope and fender mount from wear and scratch.

     

     

    Perfect Design:

    1. One quick-release button of the cleat allows you to quickly and effortlessly dock and undock with single hand.

    2. Simply click the button, drop the pin into the receiver and you’re ready to go.

    3. The cleat would attach the fender tightly to your boat.

    4. No worry about knot tying and excess rope again. Indispensable accessory on your boat.

     

    Installation Tips:

    1. Before installing the receiver, please using the Locator Disk and mark dead center of the receiver with a pencil.

    2. Be sure to check that there are no structural members, cables, etc. behind the drilled holes.

    3. Always finish drilling from the outside. This will minimize the risk of damaging the gelcoat.

    4. Hole diameter: ⌀ 1/2" Receiver = ⌀ 1" Hole; ⌀ 3/8" Receiver = ⌀ 3/4" Hole

     

    Installing the Receiver:

    1. Clean inside and outside surfaces.

    2. Screw install tool into the brass nut plate.

    3. Remove protective film from adhesive tape.

    4. Pivot nut plate, insert in hole, pivot back and pull several times to adhere tape on back side of fiberglass.

    5. Unscrew install tool.

    6. Apply marine grade silicone to underside of receiver head.

    7. Apply Loctite to receiver threads, screw into brass nut plate and tighten with Allen wrench.

     

     

     

    Package Included :

     

    1 pcs Quick Release Boat Fender Holder

     

     

    Satisfaction Guarantee:

     

    If you're not satisfied with the tool, simply return for a full refund in 60 days or get a replacement during 1Years' warranty via our customer service.

     

     

     

     

     

    Item Specifics
    Brand :VT-MOTOR
    Manufacturer Part Number :VTQP00001151
    Warranty :1 Year
    Type :3/8'' Quick Release Boat Fender Holder
    Fitment :Fit 3/8 inch Receiver
    Meterial :316 Stainless Steel
    Country/Region of Manufacture :United States
    Items Included :1 pcs Quick Release Boat Fender Holder


    1. Payment methods accepted: Payoneer.  Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.

    2. Please make sure your Ebayaddress is correct  before you pay, cause it cannot be changed once the order shipped out.

    1. Item will be shipped out within 1-2 business day after clear payment received.

    2. Please make sure shipping address on your ebay account is correct & up-to-date.

    3. Please feel free to contact us by email if you cannot get your order in time.

    We offer a 60-day money-back guarantee, as long as the item has not been installed on a vehicle and in the same condition when purchased. 

    The process for returns: 

    1. Contact us via eBay with any concerns or issues with the product you received.

    2. Begin a Return Request on your eBay account. 

    3. You will be sent a return label via eBay.

    We  maintain high standards of excellence Four 5-star rating

    and strive for 100% customer satisfaction! 

    If you are not satisfied with our product or our Service,please feel free to contact us

    immediately BEFORE you leave neutral or negative

    feedback, we will try our best to resolve any problem and make you satisfied.

     

    Please contact us via ebay using"Contact member". 

    We will respond within 1 business day or less.

    Thank you for your understanding.

     

    Our office hours is as below :

    - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday

     

    We will respond within 1 business day or less.


    All rights reserved.