DC input: 12V
DC input range: 10V-15V
Continous power: 2000w
Peak Power: 4000w ( less than 1 second)
No Load Current Draw: 1.5A
Efficiency:85%-90%
AC output: 110V
AC Regulation:3%
Frequency: 60Hz
Socket:15a USA type
Low Voltage Alarm:10.5V-11V
Low Voltage Shut Down: 10V-10.5V
Over Load: shut off, recover manually
Over Voltage Shut Down:15V
Over Thermal: Shut Off Output Automatically, Over voltage protection
Cooling Ways: Cooling Fan will run when the temperature is over 50 degree
PACKAGE CONTENT - 1x 2000W Power Inverter ,4x sets of battery cables (7AWG),1xUser Manual,Several fuses
PURE SINE WAVE POWER INVERTER- 2000W Continuous power/4000W Peak power, 12V DC to 110V AC with LED displays for DC AC voltages. 2× US outlets and a terminal for output.
How to choose Power Inverter Choice
1. If your load is the resistive load, just choose the inverter a bit higher than your equipment power. Such as the LCD TV, Computer, Cooker.
2. If your load is the inductive load, please take the surge power into the consideration. For the inverter continuous power, usually we recommend 3-5 times higher than the equipment rated power. For example, for one 9000btu (750w) air conditioner, we recommend the 3000w pure sine wave inverter.
3. If you are not sure for the inverter you need, contact us by ebay message, we will recommend the suitable inverter for you.
Pure Sine Wave Inverter Usage Tip
1.For the 2000W 12V inverter, we suggest you use a 300Ah battery to power the loads to ensure the best performance.
2. Don't use it for high rating power appliance above 2000W. Don't run at max 2000W power load for long time.
3. Connect the inverter to a 12V battery with the standard cables provided with product, and plug your AC devices into the inverter.
4. Please do not leave the power inverter in the ON position while your car is off.
5. Disconnect the positive battery terminal before doing any wiring to the inverter.
6. Do not put the inverter into sunlight directly, keep it in cool and dry environments.
About Solar Charge Controller
This controller is a kind of intelligent, multi-purpose solar charge and discharge controller. The family use the fixed LCD display, with a very friendly interface; various control parameters can be flexibly set, fully meet your various application requirements.
Parameters:
-Rated Voltage: 12V/24V
- Rated Current : 30A
- Max Input Solar Panel Power: 720W, Connect 12V or 24V Battery
- Open Voltage of Solar Panel : ≤ 50V
- Float Voltage : 13.7V/27.4V
- Low Voltage Disconnection / LVD: 10.7V / 21.4V
- Low Voltage Reconnected / LVR: 12.6V / 25.2V
- No Load Loss: ≤ 10mA
- Loop Voltage Drop: ≤170mV
- Charging Mode: PWM mode
- USB: 5V max 2A
-Battery type: only for lead acid battery, OPEN, AGM, GEL.
- Temperature Compensation: -4mV / Cell / °C
- Installation Cable area: ≤ 8# AWG
- Operating Temperature: -20 ~ 60 °C
- Storage Temperature: -30 ~ 70 °C
- Humidity Requirements: ≤ 90% , no condensation
- Dimensions: 133 x 85 x 35 mm
- Weight : 183g
- Colour: Blue


| Office Equipment: PC,Laptop,Printer,etc. Home Appliance: TV,Air conditioner,Oven,Cooker,DVD,GPS,Fridge,Cleaner,Washer, Fan,Light,etc. Industrial Equipment: Pump,Compressor,Motor,etc. [PS:Leave us message if you are not so sure about the inverter power you need] It is normal that the red light flash with the AC output on. It is the reminder of high input voltage, no affect of usage. |


