Manufacturer: ISC Suspension
Part Number: ISC-S008-S
Condition: New

Product Description:

ISC Suspension ISC-S008-S N1 Coilover Kit Street Sport

The ISC V2 N1 coilover is the optimum suspension tool for improved handling for your street or weekend track car. The ISC V2 N1 comes standard with pillowball upper mounts, and camber plates when applicable. This suspension is perfect for someone looking for performance, adjustability (height and damping) and other quality features. Over a decade of experience and feedback has allowed the ISC V2 N1 to evolve into what it is today; a premium suspension for car enthusiasts. The ISC V2 N1 coilover features a Limited Lifetime Warranty to the original owner. Our Coilovers are a single cylinder monotube design, with 32 way adjustable damping to dial in ride quality and performance to your preference. Preload adjustment is separate from ride height adjustment on all of our coilovers, this allows the vehicle to be lowered, without sacrificing ride quality. Our springs are made from SAE9254 steel, dyno tested over 500,000 times with under 5% deformation. Select ISC V2 coilovers are also compatible with our ISC Triple S upgraded coilover springs for additional customization and performance. All ISC coilovers are ISO and ARTC Certified. New Features for the ISC V2 N1 Coilover Include: New V2 Thrust Bearings: Redesigned thrust bearings now included on all the N1 configurations that come with camber plates. Our all new V2 thrust bearings feature a lower stack height, and sealed self-lubricated Japanese Koyo bearings, making them virtually maintenance free.------------New V2 Adjustable End links: When applicable our V2 N1 and V2 Basic kits will include updated adjustable end links (check application guide to determine adjustable end link eligibility). Spring Perch Isolator Pads: Revised hardened spring perch isolator pads reduce friction, allowing for more efficient preload adjustment and a longer product lifespan. Other New Features: Copper based anti-seize lubricant now included for coilover setup/installation

ISC N1 Coilover Kit includes 32 way adjustable damping, full height adjustability, mono-tube dampers, premium hardware and adjustable top camber plates. N1 Coilover Kits are available in 3 valve options and are 100% rebuildable!

Certifications: ISO9001, 2000R Certified and ARTC Certified
Dyno tested over 500,000 times on compression inspection with less than 5% deformation. Fully customizable spring rates (spring rates vary depending on application, custom spring rates are available)
Ride Height Adjustable: Full length height adjustability of up to 3 inches on most applications, high quality T6061 aluminum alloy used for all adjustment locks to provide a lightweight design that holds spring and vehicle down force
Bound Adjustable with Separate Spring Locks
Preload is separate from ride height, the lower you go, the ride quality stays the same
Warranty: ISC Suspension offers a LIFETIME WARRANTY to the original purchaser against defects in workmanship and material. For more info on this please refer to ISC Warranty
Pillowball Upper mounts: For optimal performance pillowball upper mounts are available on most ISC N1 coilovers (see application guide for specifics)
Thrust Bearing: Thrust bearings help to eliminate the chance of spring bind
a common side effect of running aftermarket coilovers
When your vehicle suspension allows (vehicle specific, please check our application guide), all ISC N1 coilovers come with adjustable camber plates as standard
3 degrees of camber adjustment
T6061 anodized aluminum top plate
Piston Design: 32-way adjustable dampening, Shafts are valved according to the spring rate, Shock dyno is used to ensure quality and consistent results
Single Cylinder Design: Mono-tube damper with high pressure nitrogen, larger cylinder and piston design to advance driving stability and dexterity
Threaded portion of shaft is powder coated and salt spray coated for street durability (suggest using anti seize or protective products when installing coilovers for more protection from the elements, if exposed to snow and salt)
ISC Springs: Made from high quality SAE9254 steel

Additional Information:

ISC Suspension 08+ Subaru Impreza WRX N1 Coilovers

Add-on: Coilspring sleeve - Front 300mm (part number: ISC-300MMCOILCOV), Rear 300mm (ISC-300MMCOILCOV)
Front Spring Length: 180mm
Front Spring Rate: 8 Kg/mm
Rear Spring Length: 180mm
Rear Spring Rate: 10 Kg/mm
Valve Option: Street Sport

Guaranteed Fitments:

2008-2011 Subaru Impreza
2012-2014 Subaru WRX



=============================================
SPARKTEC MOTORSPORTS EBAY STORE POLICIES
=============================================

Payment:

Click the Buy It Now button to safely and securely proceed to checkout. We accept all major credit cards and PayPal. The Sparktec Motorsports eBay Store requires immediate payment.

Sales Tax:

We are required to collect sales tax whenever applicable in accordance with marketplace facilitator laws.

Shipping:

FREE Standard Shipping within the contiguous United States. Most orders will ship the same day or the following business day. Please review our shipping policy for handling time and estimated delivery dates. Any address outside of the contiguous United States, please contact Sparktec Motorsports for a shipping quote.

Processing begins as soon as an order has been placed, therefore we cannot change, cancel or modify orders once they have been confirmed. To return any unwanted items, please review our return policy for return and exchange instructions.

Delivery Time:

Once your order ships, please allow an additional 1-5 business days for delivery. Tracking information will be provided to you within 24 hours of shipping out. Because our products ship from warehouses and manufacturers across the US, exact shipping method and times will vary by item.

Customer Service:

To contact us with questions/comments, please e-mail us using the "Contact seller" link. Most e-mails are answered within 24 hours, including weekends and holidays.

Returns: