HANGKAI 6.5HP 4 Stroke Outboard Motor Marine Boat Engine W/ Water Cooling CDI
Description

1. Description

The Hangkai 6.5 Hp 4-Stroke Provides All the Power You Need for Motoring in a Small Craft. This Engine Does That As Well As Providing Fuel Efficiency Second to None and a Newly Redesigned Carrying Handle and Holding Grip Make It Convenient to Transport! with All of This Available at a Competitive Price, It Is No Wonder This Little Outboard Receives so Much Attention and Praise!

2. Features&Highlights
Brand: Hangkai

Cooling System: Water-cooling

Control System: Tiller Control

3. Specifications
Short Shaft: 40cm

Displacement: 123cc

Gear Ratio: 2.08(27:13)

Cylinder: 1

Max.speed(R/Min): 5000~6000rpm

Gear Positions: F-n-r

Packing Size: 114x64x41cm

Ignition System: Cdi

Starting System: Manual Start

Control System: #93 Gasoline

N.w./G.w.(Kgs): 26/31.2

Bore X Stroke(Mm): 59x45

Recommended Propeller Range: 3 -7.8"X8"

Recommended Lubricant: Four Stroke Lubricating Oil

Mixing Ratio: Pure Gasoline

Trim and Tilt System: Manual Tilt

Overall Lxwxh(Cm): 78.3x34.3x103.9

Standard Fuel Tank Capacity: 12l

Bonus Accessories:

Brochures, Tubing, Cotter Pins

Pump Impeller, Start Rope, Start Key

12 Liter Fuel Tank, Tool Kit, Spark Plug, Cylinder Head Pad 

OT-ML-282 (18).jpg

Cylinder Scoring Is a Serious Damage,Which Caused by Improper Use and Will Cost You a Lot of Money to Repair the Motor.
Don't Do the Following Will Avoid Cylinder Scoring:
1, Start the Motor on Bank
2, Use the Motor When It Stop Coming out of Water
Even If You Want Test the Motor, It Should Be Done in the River!
When There Is No Water Coming out from the Motor,Please Stop Using It Immediately ,Then Check the Impeller of Water Pump or Check If the Water Outlet Has Been Blocked.


Novice Attention-the Machine Must Be Placed Upright When Not in Use

 

Must Read Before Using!


Four Stroke 6.5 Hp:


Firstly, Fill the Gear Oil (Open Gear Box Lid and Fill It).

Secondly, Fill No. 92 Petrol, Lightly Press Oil Pump 6-10 Times.

Thirdly, Fill Engine Oil Don't Exceed the Head of the Pattern.

Forthly, Turn the Throttle to the Start up and Turn the Accelerator Gets up to 50%.

Then, Rapidly Pull the Starter Line.

After the Motor Start, Please Turn the Throttle to Running State.

Then, It Can Be Operated Now.

Note:Our machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself.
PushAuction


On Oct 5, 2024 at 19:53:50 PDT, seller added the following information:

DataCaciques