Features:
- Designed for field professionals
- 3 ¾ digit Large LCD Display
- With stand, auto-off and buzzer
- Low battery display indication
- Automatic negative polarity indication
- Manual and automatic ranging
- Temperature measurements (-40~1000°C)
- Full overload protection
- Perform test like DCV, ACV, DCA, ACA, Resistance, Capacitance, Frequency, Temperature, hFE, Duty Cycle, Triode, Diode and Continuity Test
- Ergonomic case with protective rubber holster
General Specifications:
- Display: 3 ¾ digit Large LCD with a max readings of 3999
- Measuring method: Dual-slope integrating A/D Converter System
- Sampling Rate: approx. 3 Times / Second
- Range Selection Method: Automatic and Manual
- Polarity: Automatic Negative Polarity Indication
- Over range indication: "OL" display
- Operating Temperature: 0 ~ 40°C; Operating Humidity: <80% RH
- Storage Temperature: -10 ~ 50°C; Storage Humidity: <80% RH
- Low battery indicator
- Power: 2 x 1.5V AAA batteries (included)
- Dimensions: 185(L) x 93(W) x 35(H) mm
- Weight: approx. 290g (including battery)
Technical Specification:
Accuracy is ±(percentage of reading + number of digit) at (23±5) °C, <75% RH.
DC Voltage
| Range | Accuracy | Resolution |
| 400mV | ±(0.5%+4d) | 0.1mV |
| 4V | 1mV |
| 40V | 10mV |
| 400V | 100mV |
| 1000V | ±(1.0%+4d) | 1V |
Input impedance: 400 mV range: more than 40MΩ ; other range: 10MΩ
Overload protection: 1000 V DC or 750V AC peak value
AC Voltage (only 400mV range has manual range)
| Range | Accuracy | Resolution |
| 400mV | ±(1.5%+6d) | 0.1mV |
| 4V | ±(0.8%+6d) | 1mV |
| 40V | 10mV |
| 400V | 100mV |
| 750V | ±(1.0%+6d) | 1V |
Input impedance: 400 mV range: more than 40 MΩ ; other range: 10 MΩ
Frequency response: 750 v range: 40-100 Hz ; other range: 40-400 Hz
Overload protection: 1000 V DC / 750 V AC peak value
DCA
| Range | Accuracy | Resolution |
| 400uA | ±(1.0%+5d) | 0.1uA |
| 4000uA | 1uA |
| 40mA | 10uA |
| 400mA | 100uA |
| 4A | 1mA |
| 20A | ±(2.0%+5d) | 10mA |
Max. Measuring volt drop: 400mV under mA range, 200mV under A range.
Max. input current: 20A (less than 10 sec)
Overload protection: 0.5/250V fuse, 15A/250V fuse
ACA
| Range | Accuracy | Resolution |
| 400uA | ±(1.5%+5d) | 0.1uA |
| 4000uA | 1uA |
| 40mA | 10uA |
| 400mA | 100uA |
| 4A | 1mA |
| 20A | ±(2.0%+10d) | 10mA |
Max. Measuring volt drop: 400mV under mA range, 200mV under A range.
Max. input current: 20A (less than 10 sec)
Overload protection: 0.5/250V fuse, 15A/250V fuse
Frequency response: (40~100)Hz under 20A range, (40~400) Hz at other range.
Resistance
| Range | Accuracy | Resolution |
| 400Ω | ±(0.8%+5d) | 0.1Ω |
| 4kΩ | ±(0.8%+2d) | 1Ω |
| 40kΩ | 10Ω |
| 400kΩ | 100Ω |
| 4MΩ | 1kΩ |
| 40MΩ | ±(1.2%+5d) | 10kΩ |
Overload protection: 250V DC/AC Peak Value
Open circuit voltage: 400 mV
Capacitance
| Range | Accuracy | Resolution |
| 4nF | ±(0.5%+20d) | 1pF |
| 40nF | ±(3.5%+8d) | 10pF |
| 400nF | 100pF |
| 4uF | 1nF |
| 40uF | 10nF |
| 200uF | ±(5.0%+8d) | 100nF |
Overload protection: 250V DC/AC Peak Value
Frequency
| Range | Accuracy | Resolution |
| 10Hz | ±(0.5%+4d) | 0.01Hz |
| 100Hz | 0.1Hz |
| 1000Hz | 0.1Hz |
| 10kHz | 1Hz |
| 100kHz | 10Hz |
| 1MHz | 100Hz |
| 30MHz | 1kHz |
NPUT SENSOR: 0.7V
Overload protection: 250V DC/AC Peak Value
Diode and Continuity Test
| Range | Description | Test Condition |
| Diode | Display read approx.forward voltage of diode | Forward DC Current approx 0.5mA Reversed voltage approx. 1.5V |
| Buzzer | Buzzer sounds if resistance between terminals V/Ω and COM is less than (50± 10)Ω | Open circuit voltage:0.5V |
Overload Protection: 250 V DC/AC peak value
Warning: Do not input Voltage at the range for safety
hFE
| Range | Description | Test Condition |
| NPN or PNP | 0 ~ 1000 | Basic Current is Approx. 15 µA. Vce is approx. 4.5V |
Temperature
| Range | Description | Test Condition |
| -40 - 1000 °C | < 400 °C ± (0.8% + 4)
=400 °C ± (1.5% + 15) | 1 °C |
Thermocouple: K Type
Warning: Do not input any voltage at this range
One Set Included
- 1 x Auto/Manual Range Digital Multimeter
- 1 x pair of Test Leads
- 1 x K-Type Thermocouple Wire
- 2 x 1.5V AAA batteries (included)
- 1 x Non-slip Rubber Protection Cover
- 1 x Instruction Manual
- Standard Factory Package
Warranty: 2 years warranty
All our products are manufactured under the strict quality control guidelines established by EN ISO9001-2000 Standards
