All of our keyless remotes are listed just as the manufacturer states for make model & year compatibility -

SOME VEHICLES HAVE KEYLESS SYSTEMS INSTALLED THAT HAVE STANDARD PACKAGES & SOME ARE OPTIONAL (DEALER INSTALLED)

**(this can change what remote FCC ID &/or part will be compatible with your system)

** WE ASK THAT YOU VERIFY w/ A DEALER PRIOR TO PURCHASE AS TO WHAT FCC ID # YOU NEED FOR YOUR VIN

MAKE/MODEL

YEARS

DODGE RAM PICKUP P/U TRUCK

PROGRAMMING INSTRUCTIONS

PLEASE NOTE One programmed remote must be available for the following procedure to operate (if you do not have one please take it to your local dealer to program

ATTENTION: You MUST HAVE one working remote to add one more to the system. If you do not have one working remote right now then these instructions will not work. You will have to have a Locksmith or dealership use a computer to program the first remote for you.

1. Turn ignition to run position (as far as you can go without starting engine).

2. Using any Working remote, press the UNLOCK button for 4 to 10 seconds.

3. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and press
    the PANIC button for 1 second and release both buttons at the same time. A chime will
    sound within 3 seconds to indicate that the vehicle has entered remote programming
    mode.

4. Within 30 seconds of the chime, press any button on all remotes to be programmed
including previously programmed remotes. A chime will sound after each remote is
programmed.

5. Turn ignition to OFF and remove key.

6. Test all remotes.

1999 2000 2001 2002

99 00 01 02

All Models With Keyless Entry

“O” OPTIONAL RKE REMOTE KEYELSS ENTRY SYSTEM INSTALLED : DEPENDS ON TRIM LEVEL OR OPTION PACKAGE INSTALLED AT DEALER

DODGE DAKOTA PICK UP TRUCK P/U

PROGRAMMING INSTRUCTIONS

ATTENTION: You MUST HAVE one working remote to add one more to the system. If you do not have one working remote right now then these instructions will not work. You will have to have a Locksmith or dealership use a computer to program the first remote for you.

1. Turn ignition to run position (as far as you can go without starting engine).

2. Using any Working remote, press the UNLOCK button for 4 to 10 seconds.

3. Within the specified 4 to 10 seconds, continue pressing the UNLOCK buton and press
    the PANIC button for 1 second and release both buttons at the same time. A chime will
    sound within 3 seconds to indicate that the vehicle has entered remote programming
    mode.

4. Within 30 seconds of the chime, press any button on all remotes to be programmed
including previously programmed remotes. A chime will sound after each remote is
programmed.

5. Turn ignition to OFF and remove key.

6. Test all remotes.

1999 2000

99 00

All Models With Keyless Entry

“O” OPTIONAL RKE REMOTE KEYELSS ENTRY SYSTEM INSTALLED : DEPENDS ON TRIM LEVEL OR OPTION PACKAGE INSTALLED AT DEALER

DODGE DURANGO PICK UP TRUCK P/U

PROGRAMMING INSTRUCTIONS

1999 DODGE DURANGO

1. Turn ignition to run position (as far as you can go without starting engine).

2. Using any Working remote, press the UNLOCK button for 4 to 10 seconds.

4. Within 30 seconds of the chime, press any button on all remotes to be programmed
including previously programmed remotes. A chime will sound after each remote is
programmed.

5. Turn ignition to OFF and remove key.

6. Test all remotes

2000-01 DODGE DURANGO

ATTENTION – 1 programmed remote must be available for the following procedure to take place.

If you do not have one you will need to go to your local dealer or locksmith

A max of 4 remotes can be programmed. Any existing remotes not use during programming will become inoperative.

1. Gather all remotes

2. Turn ignition to on

3. Using programmed remote …push & hold remote UNLOCK button for 4 seconds, while still depressing UNLOCK button push panic button on remote and release both button after 6 seconds

4. Ensure acoustic sound can be heard- program active mode

5. Within 30 seconds press each remaining remote LOCK or UNLOCK button once

6. Ensure acoustic signal is emitted after each remote operation

7. Turn ignition OFF or wait 30 seconds to exit programming mode – ensure acoustic signal is heard

8. Replacement remote can also be programmed using diagnostic equipment.

1999 2000

99 00

All Models With Keyless Entry

““S” STANDARD RKE REMOTE KEYELSS ENTRY SYSTEM INSTALLED : STANDARD EQUIPMENT INSTALLED AT MANUFACTURE

All of our keyless remotes are listed just as the manufacturer states for make model & year compatibility -

**(this can change what remote FCC ID &/or part will be compatible with your system)

** WE ASK THAT YOU VERIFY w/ A DEALER PRIOR TO PURCHASE AS TO WHAT FCC ID # YOU NEED FOR YOUR VIN

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

2. We will respond via eBay messages with the manufacturer’s programming requirements so that you can determine if you are capable of programming your vehicle or if you will need to visit a local dealer or locksmith for programming with a diagnostic scan tool – we do not write the programming – we pass it on to you as a courtesy .

HOW TO FIND OUT IF REMOTE’S COMPATIBLE WITH YOUR (VIN) CAR’S INSTALLED RKE SYSTEM

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

1. INQUIRE WITH LOCAL DEALERSHIP PARTS DEPT w/ YOUR VIN TO MAKE SURE THIS IS THE FCC ID & PART # YOU NEED.

4. Some Makes, Models, & Years have multiple choices dependent on system installed

Payment: We accept payment via PayPal. All other forms of payment must be agreed upon before purchase. Payment is expected within 5 days. PA SALES TAX: As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.

Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).

Warranty/Returns: We have a 30 day return policy. Please contact us before returning items so we can give you the return items address (no returns will be granted without a note including item #, reason for return, eBay user id, and if you need a replacement…replacement fcc id and part #).

*** KEYLESS4U ENSURES PROPER WORKING CONDITION OF ALL PREVIOUSLY USED REMOTES THROUGH A SERIES OF TESTS PERFORMED USING THE SANTRONICS, INC. ELECTRONIC INSTRUMENTS KEYLESS ENTRY TESTER #3415 ...THIS TESTING PROCESS ENSURES FUNCTIONALITY OF EACH BUTTON.

OUR REMOTES HAVE BEEN UV I.D'd w/ UV TAGS with our LOGO on inner & outer components –

All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

S&H discount = the price of the 1^ST remote’s S&H + 1.99 each additional remote’s S&H

Your vehicle will be installed with one of the following keyless entry systems:

c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop.

The above information can change which remote you need
for your installed remote keyless system.…

If you do not have an old remote to compare FCC ID & PART #'s to
please contact a local dealer or locksmith and tell them your VIN#.


Condition:	Pre-Owned
Battery:	Yes, Installed
Buttons:	3: Lock, Unlock, Panic Button
Required Batteries:	2: CR2016
Frequency:	315MHz (315 MHz)
	*Compatible Vehicles:** 1999 2000 Dodge Dakota Pickup 1999 2000 Dodge Durango Pickup 1999 2000 2001 2002 Dodge Ram 1500 2500 3500 *All vehicles with factory installed Remote Keyless Entry (RKE). .