Find or Sell any Parts for Your Vehicle in USA

Dc 12v-30 Volt, 175 Amp Circuit Breaker 3/8 Auto Marine Waterproof Surface Mount on 2040-parts.com

US $44.95
Location:

Ocala, Florida, United States

Ocala, Florida, United States
Condition:New Brand:Mechanical Products Company Manufacturer Part Number:175-S2-175-2 Country/Region of Manufacture:United States Warranty:No UPC:Does not apply

Waterproof Manual Trip/Reset Surface Mount Circuit Breaker 175A

Brand: Mechanical Products Company
Rating: 175 Amp Continuous
Type: III - Manual Reset (Switchable)

The MP Series 17 Thermal Circuit Breakers are designed for branch circuit protection in industrial/commercial vehicle applications, including Construction, Agriculture, Truck, Bus, RV, Marine, Automotive Lifts, Auto Racing, Battery Chargers and more. Designed to protect wiring, lighting, batteries, motors, pumps, alternators, air compressors, inverters, converters and generators, where waterproof (IP 67) breakers are necessary. These high quality circuit protection devices offer a variety of features.

The 17 Series Breaker offers a robust thermoplastic material case enclosure, designed with superior moisture sealing, in a Standard Surface configuration. The Surface Mount units are designed with Heavy Duty 3/8" diameter Stainless Steel terminal studs and Stainless Steel sems nuts. The termination stud spacing has been designed to accept standard ring terminal configurations. Priced competitively, these high-quality breakers are assembled right here, in the USA!

Perfect for adding short circuit protection to battery cables with heavy duty 3/8" lug terminals, these are well suited for use in Automotive, Marine and RV applications. Race cars can place this circuit breaker between the trunk-mounted battery and the Main Power Kill Switch. If you get in a wreck and your battery cable shorts to the frame or body, the breaker contacts will open and the yellow lever will pop down, breaking current flow until you manually reset it. You can also manually trip the breaker by pushing the blue button, which is a handy way to quickly disconnect power.

The circuit breaker allows a continuous current flow of 175 amps. If amperage exceeds that, the breaker will pop open with time. The higher the amperage rises above the rated capacity, the quicker the breaker will pop. The less it exceeds the rated capacity, the slower it will pop the breaker. This keeps you from popping the breaker due to in-rush current (a temporary current spike) from the starter motor during initial starter activation. The breaker will not pop if continuous amperage is 175 or less.

Don't settle for cheap Chinese junk! This is a heavy duty quality piece, made right here in the USA! In stock, fast shipping!

Note: The stock photos do not show it, but the actual product you will receive has a white "175" printed on the middle left side of the breaker, just above the yellow lever, indicating that it is the 175 amp version.

Series 17 Single Pole Thermal Circuit Breakers
 
The Series 17 features
  
• 30 VDC maximum for 175 Amp
• Trip-free operation
• NEW Easy Access Terminations
• Auto, manual, or switching option
• Visible trip indication
• Available with NEW 3/8” Stainless Steel Terminal Studs and Sems Nuts
• Waterproof
• Ignition-protected
• Improved Robust Design
• Rubber Terminal Stud covers
• Manual Reset (switchable)

Series 17 Specifications

Maximum Voltage Rating
30 Volt DC (175 Amp)

Ultimate Trip
Must Hold 100% at 25°C / 77°F.
Must Trip at 135% within 1 hour.

Dielectric Strength
1,500VAC Minimum

Interrupt Capacity (175A)
2,500A @ 14VDC
1,500A @ 30VDC
 
Endurance (175A)
14VDC @ 100 cycles, 6X rating
28VDC @ 50 cycles, 2X rating

Operating Temperature Range
-40°C/-40°F to 85°C/185°F

Weight
Surface Mount: 4.0 oz. (114 gm.)

Environmental
 
Ignition Protected
Compliant to SAE J1171

Ingress Protection
IP67 dust and waterproof rated—protection against immersion up to 1 meter of water for 30 minutes.

Corrosion
Conforms to Mil-STD-202, Method 101, Test Condition A, for 96 hours under a 5% salt spray.

Humidity
Conforms to Mil-STD-202, Method 106, for 240 hours at 95% RH.

Shock
Rated to withstand 100g per Mil-STD-202, Method 213, Test Condition A.

Vibration
Rated to withstand 10g per Mil-STD-204, Test Condition A.

Regulatory Compliance Summary

Interrupt Capacity: SAE J1625, ABYC-E11, UL1077*
Ignition Protected: SAE J1171
Endurance: SAE J1625
Dielectric Strength: UL1077*
Shock, Vibration, Corrosion, Humidity: Mil-STD-202
Dust and Waterproof: IP67

*tested per UL1077 methods


Typical Overload Trip Time Data (in seconds):
 
Current Rating           200%            400%           600%           800%             1000%

175 Amps                   10-40            0.6-7.0         0.2-3.0         0.15– 2.0        0.09-1.2 


Typical Ambient Temperature Correction Factor:

Current Rating    °F                           -40               0              50            77            150           200

                             °C                          -40               -18            10            25            65             93
175 Amps                                           0.80             0.84          0.87        1.00          1.22           1.47 

*Specifications Subject To Change

Shipping Information

Priority Mail and Priority Mail Express shipping to the United States includes Alaska, Hawaii, Puerto Rico, and most US islands and territories. All parts will be shipped via USPS Priority Mail in the United States, and USPS Priority Mail International everywhere else. Please select your shipping method accordingly. USPS requires a mailbox for delivery. I generally ship items out very fast (often the same day as ordered), but the normal shipping time promised for this product is 1 business day. On very rare occasion, it may take me two business days.

The current estimated shipping time is:      1  business day

International Buyers – Please Note: 

Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.

Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.


Warranty Information

Due to the sensitivity of electrical parts, I do not offer any type of returns or refunds on this product. Any voltage issues in the vehicle's electrical system or rough handling could cause damage. Since these factors are outside of my control, I do not offer a warranty on electrical items. However, I would be more than happy to assist you, if it's dead on arrival due to shipping damage with the shipping insurance claim.

Any questions, please ask before buying. Thanks for looking!


Chuck Jordan memorial: A car life well-lived

Mon, 31 Jan 2011

Family and friends gathered at the GM Heritage Center in Warren, Mich., to celebrate the life of the late Chuck Jordan, who retired as General Motors vice president of design in 1992 and died on Dec. 9, 2010. While many of the 200 or so present remembered working with Jordan during his career that began at GM in 1949, the ceremony also made clear that he'd lived a rich and active life in retirement.

Bypass booster seats with travel vest

Tue, 19 Feb 2013

Sick of moving that booster seat from car to car whenever your child heads to grandma's? A new product, the Ride-Safer travel vest, claims it can remove the booster seat from your life altogether. Like a booster seat, the purpose of the Ride-Safer vest is to position the lap and shoulder portions of a seatbelt in a way that optimizes safety for child-size passengers.

2014 Corvette Stingray sales start limited to 900 Chevy dealers

Mon, 01 Apr 2013

When the redesigned 2014 Chevrolet Corvette Stingray begins rolling off the assembly line in Bowling Green, Ky., in late summer, only about 900 of Chevrolet's 3,000-plus dealers will get cars. Last week, General Motors confirmed to Chevy dealers which ones had qualified to sell the Stingray at launch. Those dealerships can begin ordering the car in the next few weeks.