Find or Sell any Parts for Your Vehicle in USA

Dodge Pickup Truck Tailgate 1948 48 1949 49 1950 50 1951 51 1952 52 1953 Rat Rod on 2040-parts.com

US $225.00
Location:

Great Bend, Kansas, US

Great Bend, Kansas, US
:

Original tailgate off of a 49 Dodge pickup.  This is the taller of the two tailgates Dodge used.  This one is just over 21" tall and the bottom rail is about 54" wide.  This gate has typical dings and dents in it.  It has a tear in the top rail and corners have been reinforced.  It has some rust out in the lower rail, but the rest of the gate is solid.  This tailgate will take quite a bit of work to restore, but it could be done.  It does have a great look as is for a rat rod.  Hard to find, original gate selling as is.
 
See my other auctions for more old parts.  My number for more questions is 620-786-4428.
 
*****SEE ALL PAYMENT AND SHIPPING TERMS BELOW PRIOR TO BIDDING, ESPECIALLY FOR PARTS THAT REQUIRE FREIGHT SHIPPING.  IF THERE IS SOMETHING YOU ARE NOT CLEAR ON, YOU CAN ALWAYS CALL ME FOR MORE DETAILS.*****

I cannot discuss parts that are not listed on e-bay on an e-bay e-mail.  I am only allowed to discuss the parts that are currently listed on e-bay e-mails.  E-mails about parts other than currently listed parts will not be answered.  I delete e-mails almost every day about parts that I have in stock because the request was sent on an e-bay message.  I know I can list a part someone asks about at a later time, but with hundreds of cars in stock and dozens of e-mails a day on parts, that is not possible.

 

48 STATES ONLY

I only sell in the 48 states.  I ONLY ship to the 48 states to buyers with US ADDRESSES AND US BANK ACCOUNTS.  This is due to buyers who try to "bend" the rules to get around auction restrictions.  Just because you are trying to use a buddies address in the 48 states, that does not fix the extra fees paypal charges for payments from out of the US.  Since almost ALL of my Neg. FB's over the last few years have come from buyers out of the US trying to "bend" the rules, I have been forced to do this.  As long as you have a US address with a US back acct., everything will work just as the system is designed.  If you do have a US bank acct. and you are using a third party in the US to ship to and handle your packages, it will be at the buyers risk.  I will not assume any responsibility for damage for any item that goes through a third party.

MY BUSINESS STRUCTURE

I have been selling classic cars and parts for over 25 years.  I have hundreds of cars in stock.  I get dozens of e-mails and phone calls every week on parts.  E-mails that are not clear about what you want to know, I don't have time to answer.  Questions must be clear and to the point about the part and what you want to know and I will get back to you.  I don't have time to try and guess what you want to know.  I ship a lot of parts every week.  Only a small fraction of my inventory ever ends up on e-bay.  I have my own UPS acct, I DO NOT SHIP THROUGH E-BAY because only part of what I sell is on e-bay.  That means you need to contact me directly with any shipping questions.

 

 

PAYMENT

I do accept paypal for payment, but I will not accept payments that are e-checks or have un-confirmed shipping addresses or non-verified payments.  Any payments that are flagged with any of these issues,  will be cancelled.  This is due to the way paypals system works. 

SHIPPING COSTS

My shipping quotes are designed to cover my costs of shipping.  This is obviously designed to cover the cost of shipping, but it includes several other items also.  This includes gathering and storing boxes from local body shops, tape, supplies, and a lot of time.  Buyers also need to remember e-bay is also now charging final value fees on shipping costs.  This was due to people listing items at a low price and making up the difference with extra high shipping.  These extra expenses trickle all the way down the pipe and must be taken into consideration when I decide what the starting price is on an auction.  If the shipping price on the auction is not acceptable, don't bid on the part.  I am not getting rich on freight, but I am not going to lose money on it either.

SHIPPING

The only reason my shipping time is so long is because I am tired of e-mails from people who do not understand that weekends and holidays are NOT working days.  My normal shipping day is Friday every week and as long as the part is paid for by Thurs night, I will ship it that Friday.  With the exception of Holidays, I almost always ship on Fridays.  Anything paid for by Thurs. night will be processed for Fridays shipment.  Anything paid for after Thurs. night will not ship until the following Friday.  If I am out of town on a Friday, I will catch up any shipments from the past week on the following Mon. or Tues.  I do combine shipping AS LONG AS THE ITEMS CAN BE SHIPPED TOGETHER SAFELY!  Standard shipping takes 8-10 WORKING days.  Weather conditions do affect shipping and can delay shipments.  I use UPS and USPS for shipping.  Buyers can always pick up here also.

Freight shipments have to be scheduled for pickup, so freight goes out whenever it is ready and I can get a pickup scheduled.

SHEETMETAL

Sheetmetal typically has to be shipped Frt.  Smaller pieces may go standard or oversized UPS, it will just depend on the piece.  However it is shipped, there is always the possibility of dings, dents, or rolled corners or edges in shipping.  The only way to avoid the possibility of any dents or damage is to have the part or parts crated.  Crating is up to the buyer and the buyer is responsible for the extra charges.  The shipping quote that I will give you will only cover boxing a part,  crating is extra and the buyers responsibility.  Crating starts at $100.00 per order and goes up from there depending on the order.

 

FREIGHT SHIPPING

Large items such as fenders, doors, hoods, etc. will usually need to be shipped UPS oversized or by truck lines.  Some items are better shipping oversized UPS, some have to go truck lines.  There is no way to determine the actual shipping costs until the part is packaged.  Items that will go oversized UPS can be delivered to residential addresses and will usually ship for $100.00-$150.00.  Items that are too large for UPS oversized, will have to go UPS freight.  

Freight does require a commercial business address for the best rates.  Addresses are checked using Google maps.  Only addresses located in accessible business districts are considered commercial, the garage behind your house is not.  There are additional charges for residential deliveries.  Residential deliveries also REQUIRE and phone number so the freight company can make delivery arrangements with you. 

Freight shipping usually runs around $140.00 for a commercial address and $190.00 for residential.  Those numbers can fluctuate, but that is about what freight shipping has been lately on sheetmetal.  I do NOT have Greyhound here.

Heavy parts such as engines, trans, etc. will have to be quoted individually.

 

 

VEHICLES AND CABS

Buyers have 60 days of free outside storage at the buyers risk.  After 60 days, a storage fee will apply.  If storage fees exceed the purchase price, the vehicle/cab ownership will return to me.  Buyers are responsible for all shipping costs and arrangements.  I do have names and number of transporters that have been here before that I can forward on to interested buyers. 

 

 

Mouldings & Trim for Sale

Mercedes Concept Style Coupe: Official +video

Thu, 19 Apr 2012

Mercedes Concept Style Coupe The Mercedes Concept Style Coupe – which previews the Mercedes CLA / CLC – has been officially revealed ahead of a debut at the Beijing Motor Show. Yesterday we had the first leaked photos of the Mercedes Concept Style Coupe and, as expected, Mercedes has done the decent thing and revealed their new baby CLS officially this morning, ahead of a Beijing Motor Show. It seems that the Concept Style Coupe is the car that will make an appearance at Los Angeles Debut of Transmission LA this week before scooting off to the Beijing Motor Show for a proper public debut.

Kia Pro_Cee’d GT Turbo first photo leaks out

Sun, 27 Jan 2013

We have the first of the 2013 Kia Pro_Cee’d GT – Kia’s Pro_Cee’d with the Veloster Turbo engine – ahead of its debut at the 2013 Geneva Motor Show. We reported back in October that Kia were definitely going to stick the 1.6 litre petrol turbo from the Hyundai Velsoter in to the 3-door Pro_Cee’d to create a quite warm hatch to start chasing the hot hatch market, and Kia themselves teased the Pro_Cee’d GT in November. And now, ahead of the reveal of the Pro_Cee’d GT in March at Geneva, we get the first photo of the Pr0_Cee’d GT complete with the added butchness we expected to differentiate the GT from its more prosaic siblings.

Mini will bring John Cooper Works World Championship 50 to the United States

Mon, 12 Apr 2010

Mini USA has confirmed that it will bring a limited number of the John Cooper Works World Championship 50 to the U.S. market after all. Previously, the company said that it would produce 250 of the hatch-based special editions and distribute them only in Europe.