Sell EGT Single K-Type Thermocouple Convertor to 0-5V TC KIT in Chino, California, United States, for US $129.95

Condition:New Brand:Exhaust Gas Technologies Warranty:Yes Manufacturer Part Number:EGT-0/5 Single-J2CC Country/Region of Manufacture:United States Surface Finish:Black

EGT Thermocouple Type "K" to 0-5v Amplifier / EGT Thermocouple Kit

"Single (1) CHANNEL CONVERTOR"

Just released by EGT our new Signal Converter takes any Type "K" Thermocouple (Ungrounded or Exposed Junction)and converts its signal to 0-5volt output.

The Kit Includes (1)

WORLD FAMOUS

Stinger

"HYPER RESPONSE"

EGT Probe w/ Mounting Hardware!

**Stinger EGT sensor has 72" inch wire length, exposed tip w/ universal weld-on / 1/8" NPT screw-in hardware.

***Enclosed Tip Sensors & Stainless Mounting Options are Available***

Converter Spec's:

(1) Channels for Type "K" Thermocouple. (T/C Included)
Compensated sensor terminals w/ cold junction compensation.(uses any length wire)
Recommended Input Voltage +14.5V to 36V DC.
Output is 4mv/C / 0c = 0v to 1250C = 5.0v
Temperature Range 0C - 1250C or 32F - 2282F
Compact and easy to install w/ Velcro or Screw Mount

**Optional EGT connections are available, Consult Factory**

Most Dataloggers like AEM EMS, Greddy EManage, Motec, Stack, ACR, HRC, Many Dyno's & Industrial Applications have provisions for 0-5v inputs, this device solves the problem with interpreting the thermocouple's millivolt signal.

This auction includes:

(1) Single Channel Thermocouple Convertor 0-5v
(1) Stinger EGT Sensor's w/ 72" wire length w/ mounting hardware.
(1) EGT To Convertor Box Termination Kit .
(1) Install Instructions

**Optional EGT connections are available, "No Charge"

Standard Stripped Leads (Standard)

Staggered Leads w/ Ring Terminals (Optional)

Mini Jack (Optional)

On the thermocouple side of any instrument it is important to use what they call a compensated connector this means that the connector has to be made of the same alloy's as the type used in the a type "K" thermocouple. Using any other alloy will cause the instruments reading to have an error. To simplify the ordering process EGT has optional Type K connections.

Please let us know which connector is desired at checkout.

(Consult factory for the mating connector)

Here's the link to the Spec Sheet!

http://www.exhaustgas.com/PDF/1813.pdf

If you have any questions feel free to contact EGT @1-800-348-4678

Michelin Challenge Design 2014 winners revealed

Mon, 13 Jan 2014

The winners of the Michelin Challenge Design 2014 have just been revealed at a private event in Detroit's Renaissance Center following the first press day of the NAIAS. Chris Luchowiec of Poland was awarded first place for his ‘BOT' design, a completely autonomous transportation solution for relatively low populated areas. His concept is designed to address the issue of lone car commuters, traffic congestion and the generally poor experience of mass transit use.

Braunschweig University of Art Show 2005

Fri, 09 Dec 2005

Transportation Design students from Braunschweig University of Art in Germany presented their work at the 2005 graduation show held in July. The show displayed final thesis projects as well as projects from the last term. Graduating student Ingo Brueckmann presented an open roadster as his diploma project.

2012 BMW X6 Facelift revealed

Thu, 26 Jan 2012

2012 BMW X6 Facelift arrives - if you look hard The reveal of the new BMW X6 M50d earlier today also heralds a facelift for the entire X6 range. Due to debut at Geneva 2012. After endless teasing – and speculation going back several years – BMW has introduced the X6 M50d and its new M Division siblings earlier today.

Egt Single K-type Thermocouple Convertor To 0-5v Tc Kit on 2040-parts.com

Chips, Programmers for Sale

Michelin Challenge Design 2014 winners revealed

Braunschweig University of Art Show 2005

2012 BMW X6 Facelift revealed