Find or Sell any Parts for Your Vehicle in USA
Car & Truck Parts > Engines & Components > Complete Engines

Ford 302/328hp Crate Engine By Tuff Dawg Engines on 2040-parts.com

US $2,695.00
Location:

Phoenix, Arizona, US

Phoenix, Arizona, US
FORD 302/328HP CRATE ENGINE by TUFF DAWG ENGINES, US $2,695.00, image 1 FORD 302/328HP CRATE ENGINE by TUFF DAWG ENGINES, US $2,695.00, image 2 FORD 302/328HP CRATE ENGINE by TUFF DAWG ENGINES, US $2,695.00, image 3
Returns Accepted:ReturnsNotAccepted Warranty:Yes

FORD 302/328HP
Hi Performance Balanced Engine

FREE professional crating and shipping in
the contiguous US when you "Buy it Now"!
International shipping available please contact us!

If you are looking to upgrade that old, tired Ford 289 or Ford 302 and bolt in extra horsepower this Ford 302 crate engine by Tuff Dawg Engines would be an EXCELLENT choice with 328hp @ 5000rpm and 337ft lbs of torque @ 4000rpm. This engine has a semi-rough idle with enough cam to give it that muscle car sound but is still mild enough to be reliable for that everyday driver or restoration project. This engine works best with a mild 2200 stall speed converter if being used with an automatic transmission. This engine runs on leaded or unleaded premium pump fuel.

The balanced rotating assembly (typically includes crankshaft, pistons, rings, connecting rods, rod bearings, and balancer) featured in this engine:

  • 3.000" stroke nodular iron crank
  • 5.090" forged rods with ARP rod bolts
  • 9 to 1 compression hypereutectic pistons

More special features of this engine include:

  • Seasoned block that has been vatted, magnafluxed for cracks, thermal cleaned and steelabrated, bored, honed and plateau honed to fit new flat top oversized pistons
  • Deck head gasket surface on block to ensure a good long lasting seal
  • New CompCams Hydraulic flat tappet cam with .509"Int/512"Exh valve lift
  • Heads have 3-angle valve job with bowls blended & hump in exhaust port removed for better flow
  • New 1.940"Int/1.600"Exh swirl polished stainless valves with undercut stems to improve flow
  • Both heads have been resurfaced to ensure a good long lasting seal
  • New Hardened exhaust seats for use with leaded or unleaded fuel
  • New High performance 1.440" springs set up to match cam
  • New Valve seals
  • New Valve guides
  • New Screw-in rocker studs with guide plates
  • New 1.6 roller tip rocker arms with balls and nuts
  • New Oversize pistons and rings
  • New Hardened push rods for use with guide plates
  • New Heavy duty double row timing set
  • New Oil pump
  • New Brass expansion plugs
  • New Oversize main and rod bearings to fit reground 3.00" stroke crankshaft
  • New Edelbrock Performer RPM dual plane aluminum intake manifold
  • All parts are painted separately before assembly for that show quality look

This engine comes completely assembled with oil pan, timing cover, harmonic balancer, valve covers, and Edelbrock aluminum intake manifold.

This engine is custom built from start to finish in our state of the art facility by professionals that take pride in their work to guarantee that you get a top quality engine the first time!.

This engine is covered by a 1 year written warranty.
(There is no warranty when using a Blower, Turbo, Super Charger or NOS)

If you have any questions regarding this item please call us at
D&J Machine & Performance Engines
(602) 395-0800 Mon-Fri 8:00AM to 5:00PM MST

Current Phoenix Time

NOTE: Arizona does not observe Daylight Savings Time
or enginebuilder_1(at)yahoo(dot)com.

Here at D&J MACHINE & PERFORMANCE ENGINES we have over 38 years experience in building top quality affordable, streetable, performance engines.

Purchase:

"Buy it Now" for $2695.00. AZ residents add 8.3% tax. No core required!

Shipping:

Residents of the contiguous United States will get FREE shipping to your home or business address that is accessible by a tractor trailer rig! This is a retail savings of $200.00 to $600.00 in professional crating and shipping costs!

International shipping available, please contact us. D&J Machine will not be responsible for any customs delays or fees. ALL tariff and tax charges are the responsibility of the purchaser!

TERMS OF PAYMENT:

  • VISA, MASTERCARD, DISCOVER, AMERICAN EXPRESS
    • We are able to take your credit card orders over the phone!
      Just call (602) 395-0800 Mon-Fri 8:00am - 5:00pm MST
  • PayPal
    • If you are already a verified member of PayPal you may use this convenient method of payment
      Note: Can take 3-4 days to become verified for large ticket items
    Pay me securely with any major credit card through PayPal!
    Pay me securely with any major credit card through PayPal!
    Visa MasterCard Discover American Express eCheck

    Not what you are looking for?
    Please check out our other Auctions!

© D&J Machine & Performance Engines 1974 - 2012. All rights reserved
TuffDawgLogo ™ pending

Peel P50 and Trident back in production – the world’s smallest car

Mon, 23 Jan 2012

Peel P50 and Peel Trident - backed by James Caan The Peel P50 and Trident – the Isle of Man’s contribution to the car world – are now back in production with an electric motor. Top Gear fans will probably remember Jeremy Clarkson taking the Peel P50 – billed as the world’s smallest car ever – for a trolley round London and the BBC (we’ve published the video below to remind you). Now, with the world obsessed with small cars, a bunch of businessmen – backed by former Dragons’ Den Dragon James Caan – are putting the Peel P50 and Trident back in to production.

Mercedes-Benz B-Class

Thu, 25 Aug 2011

The rather unloved yet brilliantly packaged Mercedes B-Class will enter its second generation at next month's Frankfurt motor show. Gone, sadly, is the ingenious sandwich floor construction, replaced by a conventional front-drive platform. The result is a reduction in height by 48mm to 1557mm, while length has grown by 89mm and width by 11mm.

BMW M3 GTS (2010) unveiled: a new M3 CSL first official pictures

Thu, 05 Nov 2009

BMW might not be producing an M3 CSL, but this is something much better. Called the M3 GTS it’s a stripped-out 450bhp road-racer designed to take on the Porsche 911 GT3 RS. It’s a response to those that thought M Division might have lost its way: 'The BMW M3 GTS which we are currently preparing in our BMW M production workshop is a response to frequently expressed customer wishes', said M Division’s CEO Dr Kay Segler at the unveiling.

2040Parts.com © 2012-2025. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.042 s, 12290 u