Find or Sell any Parts for Your Vehicle in USA

Honda Vtx Batwing Fairing Windshield C R S 1800 1300 Bagger 6x9" Spks on 2040-parts.com

US $269.00
Location:

Dallas, Texas, United States

Dallas, Texas, United States
Condition:New Brand:USA-BIKER.COM Surface Finish:primer black Manufacturer Part Number:F4-1 lot den


INCLUDED:

1) HONDA VTX FAIRING 6X9” INCHES SPEAKER HOLES.

2) 5 INCHES WINDSHIELD

3) 6 O-RINGES

4) NUTS AND BOLTS TO PUT THE FAIRING TOGETHER. (STAINLESS STEEL NUTS AND BOLTS)

NOT INCLUDED: SPEAKERS, CD COVER, CD PLAYER

NOTHING ELSE INCLUDED UNLESS STATED ABOVE. 

 

 

PLEASE READ:

 

SPEARKERS, CD PLAYER  ARE NOT INCLUDED IN THIS AUCTION

 

** WE DO OFFER SPEAKERS FOR AN ADDITIONAL $100

** WE DO OFFER A CD PLAYER FOR AN ADDITION $100

** WE DO OFFER A CD COVER  FOR AN ADDITION $35

***ANTENNA --- INTERNAL ANTENNA PLACED USED INSIDE THE FAIRING WITH RADIO.  ADDITIONAL $15

*** WE DO OFFER FAIRING TRIM+ NICE BOLTS FOR AN ADDITION $59

***WE DO OFFER A 12" CLEAR WINDSHIELD FAIRING FOR AN ADDITION $60

*** PLEASE LOOK AT OUR OTHER AUCTIONS FOR THOSE ***

 

FAIRING ARRIVES IN PRIMER BLACK. PREP WORKS WILL BE NEEDED BEFORE FAIRING CAN BE PAINTED

Clamps to fork tubes between the triple trees; will not work with Spec 2 or 3-type chrome fork tube covers

NOTE: PLEASE SEE A PROFESSIONAL FOR INSTALLATION

The 1800 fairing can fit on the Honda VTX 1300

Honda VTX 1300 R & S models:

The R & S model fork tubes between the triple trees are covered with sheet metal shrouds that have to be removed for the fairing installation.  This entails you to remove the top tree to slide the shrouds off the tubes, which should be done according to your shop manual.  After you have removed the shrouds, the fairing can be installed on the bare fork tubes with the use of PVC pipe spacers.  The spacers are needed because the inverted forks on the 1800 model (which the fairing is a custom fit to) are a larger diameter than the 1300 model.  Without the spacers the mounting clamps would crush the fiberglass fairing.

Honda VTX 1300 C model:

The C model fork tubes needs only the spacers to physically mate up the fairing, but there is a interference problem with the turn signals.  They have to be removed from the fork tubes to allow the fairing to be mounted.  If relocated below the lower tree they may interfere with the front suspension travel, so we don't recommend that.  Custom turn signals are suggested

***  BIKE MUST BE EQUIPED WITH HARDWARE TO ACCEPT NORMAL WINDSHIELD IN ORDER TO ACCEPT THIS FAIRING. WE ONLY PROVIDE THE HARDWARES TO ATTACH THIS FAIRING TO YOUR ORGINAL HARDWARE.

SOME ITEM CAN'T BE COMBINE FOR SHIPPING.

ITEM WILL BE SEND OUT FROM DALLAS, TEXAS USA.

WE WILL SHIP TO CONFIRMED ADDRESS ON PAYPAL ONLY.

 

 

Policy:

 

·        PLEASE EMAIL US DIRECTLY IF YOU HAVE ANY QUESTIONS, CONCERNS, PROBLEMS OR ANYTHING WITH US. WE WILL DO OUR BEST TO ASSIST YOU AND MAKE SURE YOU’RE SATISFIED.PLEASE CONTACT BY EMAIL AND NOT BY OPEN A CASE. PLEASE EMAIL OR CALL.

 

·        PLEASE GIVE US UP TO 24HOURS TO GET BACK TO YOU. WE DON’T WORK DURING WEEKEND AND HOLIDAYS. IF YOU HEAR FROM US IN EMAIL, PLEASE CALL US.

·        PLEASE READ THE ENTIRE DESCRIPTION TO MAKE SURE IT’S WHAT YOU WANT TO BUY AND MAKE SURE IT FITS YOUR BIKE.

 

·        PLEASE RESEARCH BEFORE YOU BUY, WE WILL TRY OUR BEST TO ANSWER YOUR QUESTIONS BUT SOMETIME WE ARE NOT 100% SURE.  MOST OUR PARTS ARE COMPATIBLE WITH OEM PART ONLY. PLEASE MAKE YOUR PART ARE OEM AND EXTRA ACCSSORIES WILL WORK ON YOUR BIKE.

 

·        PLEASE GIVE US UP TO 3 DAYS TO PREPARE FOR SHIPPING. WE DO SHIPPING EVERYDAY BUT SOMETIME WE ENCOUNTER SOME ISSUES SO PLEASE PARDON US.

·        WHAT YOU SEE IN THE PICTURES ARE WHAT YOU WILL GET. 

·        IF YOU DON’T KNOW HOW TO INSTALL, PLEASE SEEK FOR PROFESSIONALS.

Terms:

  • ALL PRODUCTS ARE BRAND NEW!!!!!
  • IF ANY QUESTIONS ON OUR PRODUCTS, PLEASE SHOOT US A MESSAGE THROUGH EBAY, WE WILL TRY TO ANSWER ALL QUESTION ASAP.
  • OUR PRODUCTS ARE HIGH QUALITY AFTER MARKER PARTS.  
  • IF YOUR MOTORCYCLE IS NOT LISTED AS COMPATABLE FOR THIS PART, THEN IT WILL NOT FIT. IT MAY TAKE YOU TO MEARSURE IN ORDER TO SEE IF IT WILL FIT YOUR MOTORCYCLE. IF YOU DO HAVE QUESTIONS STILL, PLEASE LET US KNOW AND WE WILL GET YOU AND ANSWER AS SOON AS WE CAN.
  • ***SPECIAL NOTE: PLEASE BE AWARE THAT INSTALLATION INSTRUCTION WILL NOT COME WITH THE PRODUCT. PLEASE SEE A PROFESSIONAL FOR INSTALLATION.
  • WE SHIP VIA UPS/FEDEX FOR 48 STATES, AND FEDEX/USPS FOR INTERNATIONAL. IF YOU USE  P.O. BOXES, WE CAN ONLY USE USPS TO SHIP.  PLEASE MAKE SURE YOU PROVIDE A GOOD ADDRESS THAT IS VERIFIED WITH PAYPAL.
  • WE CAN'T SHIP TO UN-VERIFIED ADDRESS IN PAYPAL.
  • SIGNATURE CONFIRMATION ON SOME ITEM.
  • NO LOCAL PICKUP

Refund Policy

100% Money back guarantee. Refund/Exchange within 14 days if dissatisfied. You just mail the item back in the original condition, you will get your money back(No re-stocking charge).   

Feedback Policy

We always provide Positive Ratings and Excellent feedback to all buyers. Before Leaving a Negative Feedback for any reason, please contact us.  We beleive that all disputes can be settled by mutual agreements.

Accessories for Sale

Ferrari to show Enzo replacement to a select few by the end of the year

Tue, 13 Mar 2012

Ferrari will show the replacement for the Enzo supercar to a select group of current and potential customers at the end of 2012, Ferrari Chairman Luca Cordero di Montezemolo said. “We want to surprise people not just in terms of price but also with the car itself,” Montezemolo told Automotive News Europe on the sidelines of the Geneva motor show last week. Ferrari has not decided when the new limited-edition model will make its public debut.

Motorcycle makers revved for rebound

Mon, 10 Dec 2012

Bikes are back. After being hit a lot harder by the recession than carmakers, the motorcycle industry, more susceptible to the whims of discretionary spending, is on its way back. “Unit sales are growing for the first time in several years,” said Danny Phillips, executive vice president of Advanstar, the parent company of Progressive International, which put on last weekend's motorcycle show at the Long Beach Convention Center.

NASCAR: Bristol president Jeff Byrd dead at 60

Mon, 18 Oct 2010

Jeff Byrd, president and general manager of Bristol Motor Speedway and Bristol Dragway, died on Oct. 17 following a long illness. Byrd, 60, had been the president of the Tennessee facilities since January 1996, when Speedway Motorsports Inc.