Hydrastar Brake Actuator Pump Hyrdaulic Brakes on 2040-parts.com
Sauk Centre, Minnesota, US
THIS IS A HYDRASTAR BRAKE ACTUATOR. IT IS MADE FOR A HYDRAULIC DRUM BRAKE SET UP. THIS ONE IS RATED FOR 1000PSI. TO RUN DISC BRAKES YOU WILL NEED THE 1600PSI. THIS ONE WILL NOT WORK WITH A NEW CHEVY IN DASH CONTROLLER. IF YOU NEED IT TO WORK WITH A CHEVY YOU WILL NEED TO BUY A $50 MODULE TO INSTALL AND IT WILL WORK. THIS WAS INSTALLED ON A TRAILER BUT WAS REMOVED BEFORE IT WAS EVER PUT ON THE ROAD. WORKS GREAT AND RETURNS ARE EXCEPTED IF IT DON'T. MADE TO WORK WITH A 9AMP BREAKAWAY KIT. USES 3/16" BRAKE LINE AND HAS A 4 WIRE HOOK UP. IT BOLTS DOWN WITH 4 1/4" BOLTS
There is no warranty expressed or implied. On any part on our store unless stated in the text. If you have questions or issues, you can reach us at Felling Trailers 1-800-245-2809.
IF THERE ARE ANY QUESTIONS ABOUT THIS ITEM OR ANY OTHER ITEM ON OUR EBAY STORE FEEL FREE TO CONTACT ME AT THE INFORMATION BELOW. AGAIN IF YOU DON'T SEE SOMETHING YOU WERE LOOKING FOR LET ME KNOW WE ARE A FULL SERVICE AND PRODUCTION FACILITY AND HAVE A WIDE VARIETY OF PARTS IN OUR 3 MASSIVE WAREHOUSES.
****Shipping will vary depending on your location and time you want it there. You can contact me with quotes. Shipping will be cheaper if you buy several items check out our Ebay store for more item's.
TARAN ENGLE
PARTS DEPARTMENT
FELLING TRAILERS
1525 MAINSTREET SOUTH
SAUK CENTRE, MN 56378
PH: 1-800-245-2809
FAX: 1-320-352-5230
Trailer Brakes for Sale
Tekonsha prodigy p2
Dexter brake backing plate, 10" right hand, hydraulic for trailer
Dexter brake backing plate, 10" left hand, hydraulic for trailer
10" - right hand - brake backing plate, electric for trailerDesign Services: Listen again to Dassault Systèmes' latest webinar
Thu, 20 Dec 2012Dassault Systèmes webinar, ‘The Silverbull Bike made with CATIA for Creative Designers and CATIA Icem V6-R2013x', took place on 13 December at 1000 GMT. Two CATIA experts gave a 30-minute presentation about how CATIA for Creative Designers software helped designer Marc Boulangé realize his vision for the Silverbull motorbike. The session was followed by a 15-minute Q&A session.
New MINI JCW GP laps Nurburgring in 8:23 (video)
Sun, 29 Jul 2012We have video of the fastest MINI ever – the MINI John Cooper Works GP II – lapping the Nurburgring in 8:23. We revealed back in April that a new version of the MINI JCW GP was on the way, and MINI got round to confirming that in May when the new MINI John Cooper Works GP was officially revealed. At the time, MINI told us that the new MINI GP could hustle round the Nurburgring a full 19 seconds quicker than the old MINI GP making the new hot MINI the fastest MINI ever made (well, the fastest MINI ever made by BMW, anyway).
Infiniti Emerg-E: Geneva 2012
Tue, 06 Mar 2012Infiniti Emerg-E arrives at Geneva The Infiniti Emerg-E has been revealed at Geneva 2012 with 402bhp from a pair of electric motors and a range-extender engine. The Infiniti Emerg-E, which has been revealed today at the Geneva Motor Show, looks to be a properly promising supercar from Infiniti, and utilises the expensive range-extender technology to produce a stunning-looking car with proper performance potential. Power for the Emerg-E comes from a pair of electric motors powering the back wheels with a combined output of 402bhp and is capable, say Infiniti, of up to 300 miles between charge thanks to its 1.2 litre 3-pot range extending engine (which comes from Lotus) and up to 30 miles on EV power.