Find or Sell any Parts for Your Vehicle in USA

Ls3 Rocker Arms - With Updated Trunion Kit Installed L99 L76 L92 Ls9 Lsa on 2040-parts.com

US $265.99
Location:

Niles, Michigan, United States

Niles, Michigan, United States
Condition:Remanufactured Brand:michigan motorsports Interchange Part Number:trunnion Manufacturer Part Number:25200

Description:


New LS3 Rocker Arms with Trunion Bearings Professionally Installed


These Chevrolet Performance LS3 Intake Rocker Arms feature offset fulcrum for use on LS3,L99 L76 L92 LS9 LSA "square port" cylinder heads.


New Ls3 Rocker Arms have been disassembled and new Trunion Bearings were professionally installed

Include new LS3 specific bolts for installation.


Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended.   The stock bearings have a tenancy to fail.  These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.  We utilize LS3 rocker arms and new LS rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The new design from utilizes caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS needle bearings, which can send loose needles throughout the engine upon failure.


This kit includes:
16 New LS3 Series Rocker Arms
16 rocker arm trunnions- LS3-type retrofit
32 rocker arm bearings- LS3-type retrofit
32 rocker arm retaining rings- LS3-type retrofit
16 bolts for LS3 trunnion kit

Install
the upgraded rocker arms to the cylinder heads using the new socket
head cap screws supplied. Be sure to rotate the trunion so that the
flat recess side of the trunion's center hole faces upward (the socket
head cap screw must seat against this recessed flat side of the hole).
Tighten the cap screw to a value of 22 ft-lbs, following the OE
installation procedure.

Chrysler's high-stakes 'no' to NHTSA

Mon, 10 Jun 2013

DETROIT -- For 17 years, automakers have complied with every request for a recall, no matter how costly, from the National Highway Traffic Safety Administration. And then last week, in a startling decision, Chrysler Group said no. It refused a request from NHTSA to recall 2.7 million 1993-2004 Jeep Grand Cherokees and 2002-07 Libertys for an alleged fire risk caused by fuel tanks mounted behind the rear axle.

F1 Korean Grand Prix: Red Bull CGI Video

Sun, 17 Oct 2010

Red Bull treat us to a CGI of the new F1 track in South Korea The F1 Circus gets bigger and bigger every year as Bernie Ecclestone continues his aim to host a Grand Prix in every country that can scrape together a few hundred million to add to the bank of Ecclestone. And one of the newest to succumb to the charms of Bernie and F1 is South Korea. There have been doubts that South Korea would get their act together and have their shiny new F1 facility ready to roll for 24th October (next Sunday), but it looks like the track has been signed off for next week’s race.

Your new Volvo will drive itself by 2014

Wed, 24 Oct 2012

Volvo is ready to offer an autonomous driving system in their cars by 2014 that will drive the car for you in traffic jams. Every petrolhead on the planet will throw their hands up in horror at the news that Volvo are to introduce a semi-autonomous driving system in to their cars in 2014. But they shouldn’t.