Find or Sell any Parts for Your Vehicle in USA

Mb Quart Xa1-1500.1d 1500w Rms X-line Mono Car Audio Amplifier+capacitor+amp Kit on 2040-parts.com

US $182.95
Location:

Inwood, New York, United States

Inwood, New York, United States
Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ... Brand:MB Quart Channels:Mono MPN:XA1-1500.1D+RWK4CU+RXC4D RMS Power:1500W UPC:613816001026 Country/Region of Manufacture:China Model:XA1-1500.1D+RWK4CU+RXC4D

Package: MB Quart XA1-1500.1D 1500w RMS X-Line Series Mono Class D Car Audio Amplifier With Bass Remote + Rockville RWK4CU 100% Copper Full-Spec 4 AWG Complete Car Amplifier Installation Kit + Rockville RXC4D 4 Farad/12 Volt Digital Power Capacitor

main image
Images of: MB Quart XA1-1500.1D 1500w RMS X-Line Series Mono Class D Car Audio Amplifier
Click Thumbnails to Enlarge
Images of: Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC
Click Thumbnails to Enlarge
Images of: Rockville RXC4D 4 Farad Digital Car Capacitor Blue LED Voltage Display Power Cap
Click Thumbnails to Enlarge

Condition and Warranty

Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR MANUFACTURER

Product Description

Package Includes:
  • (1) MB Quart XA1-1500.1D 1500w RMS X-Line Series Mono Class D Car Audio Amplifier
  • (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Wire Kit
  • (1) Rockville RXC4D 4 Farad Digital Car Capacitor

Authorized MB Quart Dealer!

Features of XA1-1500.1D:

  • MB Quart XA1-1500.1D 1500w RMS X-Line Series Mono Class D Car Audio Amplifier
  • Power @ 4-OHMS: 1 channel x 325 Watts
  • Power @ 2-OHMS: 1 channel x 750 Watts
  • Power @ 1-OHM: 1 channel x 1500 Watts
  • Elaborate preamplifier with extended control
  • Q-Stasis preamp stage with wide input range
  • Class SQ A/B topology designed by Lukas Lowe
  • Class Q1 proprietary class D topology
  • Fluid-FETS hand selected insulated MOSFETS
  • Focused mass heat sink design
  • Frequency response: 10Hz-300Hz
  • Signal to Noise Ratio: >90
  • THD %: <0.5%
  • Variable Bass Boost: 0 to +9 dB bass boost at 45 Hz
  • Variable low-pass filter: 40 - 300 Hz
  • Subsonic filter: 10 - 40 Hz
  • Fuse: 60A x2
  • Remote Level Control
  • Dimensions(L x H x W): 15.7" x 9.2" x 2.2" (400 x 235 x 56mm)


Description of RWK4CU:

We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more than 100 % copper. So the only way a cable would out-perform this one is if it were being advertised as a 4 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.

We guarantee that this kit will compete with the most expensive amp kits on the market from Kicker, JL Audio, or any other top brands.

Maximum Power!
Looking for a wire kit that has 100% true specifications? A wire kit that uses 100% copper 4-gauge cable? Then look no further than the Rockville True-Spec RWK4-CU 4 Gauge Amplifier Wiring Installation Kit. This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency. All items included in this kit are top of the line.

The power and ground cables aptly named “Mega Power Cable” is a no compromise power cable. Rockville’s engineering team over-built and designed the cables using thousands of strands of only true 100% oxygen-free, silver-tinned copper strands. The use of a proprietary special twisting process reduces “surface skin impedance loss” so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet! The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy. The 100% copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility. This flexible and well-shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.

Some manufactures use all aluminum or mix a little copper with aluminum to give their cables the appearance of a “heavy-duty” cable. But not Rockville, our True-Spec 100% oxygen free, silver tinned copper eliminates corrosion, increases current transfer x 10, and won’t discolor over time.

The superior quality and materials of the Rockville 100% True-Spec amplifier installation kit is realized in the included accessories and cable workmanship. Included is a precision CNC cut full size ANL fuse housing, machined from solid brass and then 14K gold plated for superior signal transfer and complete with a matching gold plated 120-amp ANL fuse. The power cable is wrapped in 6 feet of durable nylon braided tubing to protect it from heat and chafing in the engine compartment. All installation accessories such as the ring terminals and spade connectors are nickel plated for superior signal transfer and durability.

CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE
The speaker cable included in the Rockville True-Spec is also manufactured from 100% copper and woven in to a flat planner design and coated in our Super-Flex insulation so that it fits under and around your vehicles trim and carpet smoothly and without bulking up. With crystal clear sound quality these speaker cables deliver true audio fidelity from your car audio amplifier to your speakers. The 14-gauge speaker cable included in the 4-gauge kit can handle over 2000 watts of power without heating up or degrading signal quality.

CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE
Designed and engineered to be the best sounding, best performing and best looking RCA cables available today. Each channel in the RCA cable is triple shielded first with dielectric internal insulators and then with a 98% coverage woven shield. All cables are manufactured of 100% oxygen free copper and feature twisted pair technology for superior noise rejection and pure sonic signal flow. The RCA plugs are shielded metal and feature a spiral cut outer ground ring with center split pin for precise and tight audio connections. The result of all this technology is noise free-noise rejection signal transfer for optimum sound quality. You will hear the difference these RCA signal transfer cables will make.

Amplifier Kit Key Features:
  • Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables
  • 4 Gauge Power Amplifier Installation Kit
  • Designed specifically for car audio systems over 1000 watts RMS to 2000 Watts
  • Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
  • The solid brass gold plated Mini ANL Fuse Holder offers ideal protection for high powered systems
  • Strand Count: 1862
  • BC-5W2 Compliant
Kit includes:
  • 17 ft. Frosted Blue 4 gauge power wire with seamless crimp ring terminal
  • 3 ft. Frosted Gray 4 gauge ground wire
  • 17 ft. Blue 18 gauge remote lead wire
  • 25 ft. Frosted Clear/Blue 14 gauge flat speaker wire
  • 17 ft. Triple shielded twisted pair RCA cables
  • One Mini ANL Fuse Holder with 120 amp ANL fuse
  • One 1/2“ black rubber firewall grommet
  • One 4 gauge spade terminal
  • Two black 12 gauge nickel-plated spade lugs
  • Three blue 12 gauge nickel-plated spade lugs
  • One black 4 gauge ring terminal
  • Ten 6” black zip ties
About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville monitors are backed with a full one year warranty, though it is unlikely that you will need to use it.

Authorized Rockville Dealer

Description of RXC4D:

Today’s car audio amplifiers need huge amounts of current. Often a vehicle’s electrical system is unable to provide it. With your car’s air conditioning running, the factory electrical charging system may already be operating at only 70% of full capacity. When a bass note hits or when playing your system very loudly, there may not be enough electrical energy to power your amplification system properly causing your music to sound strained and distorted. Rockville capacitors are designed to store enough electrical current and to release this energy extremely fast due to their superior design and low internal resistance. In addition, as quick as your amplifier needs a new current surge, your Rockville capacitor will provide it. This continuous cycle of power discharge and recharge guarantees flawless bass playback.

Features:

  • Rockville RXC4D 4 Farad Capacitor
  • 4 Farad/12 Volt Stiffening Capacitor with 24 Volt Surge Capacity
  • Lucite Encapsulated Display and Logic Circuitry.
  • Red LED Digital Voltage Display.
  • Blue Led Flashing Charge and Discharge Metering.
  • IC Controlled circuitry with negative polarity built-in protection.
  • Dimensions: 13" long x 3.75" wide x 7" high
  • Includes Clear Lucite Unbreakable Mounting Brackets, hardware and charging  resistor with instructions

Return Policy

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy.

Prior to returning merchandise, contact us and we will give you a return authorization #.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options:

  • We will send you a pre-paid shipping label to replace the item for a brand new one.
  • We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
  • We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us.

Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options:

  • You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit.
  • You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us.

Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.

Item Code: XA1-1500.1D+RWK4CU+RXC4D

Car making mysterious noises? There's an app for that

Wed, 30 Apr 2014

You may pride yourself on your ability to diagnose a developing engine problem by sound alone, and then replicate said mystery sound, Click-and-Clack-style, to amuse/annoy your friends and coworkers. ClingClanger is a new phone app that's designed for the rest of the world -- those who can't identify piston slap by sound and are startled by the clicking caused by a dying battery. The natural impulse is to simply crank up the radio and hope the noise/problem goes away.

Jaguar & Land Rover to share more platforms. But you already knew that.

Thu, 01 Nov 2012

As Jaguar and Land Rover expand their model range and move to aluminium construction, they plan to share more platforms. Jaguar has been using an aluminium platform for the XJ for some time – long before the latest XJ came along. The aluminium platform the XJ uses is just the start for Jaguar Land Rover, as we reported back in 2009, and it seems that JLR are planning to use the move to aluminium underpinnings to cut their platforms to just two or three.

Formula 1 2012: The Cars [w/video]

Tue, 07 Feb 2012

Nine of the 12 Formula 1 teams have released images and details of their cars for the 2012 World Championship as the first day of pre-season testing draws to a close at the Jerez circuit in Spain. Motor sport may fall slightly outside of Car Design News' usual remit, but the big story this year is the new 'stepped nose', which all teams bar McLaren have introduced to comply with new safety regulations, much to the chagrin of aestheticists. And with designers such as Daniel Simon (he produced the livery for HRT last season) and Peter Stevens (most notable for the Brabham cars of the 1980s) involved with the sport over the years, it's always interesting to check out the season's new machines.