Mud Flaps To Fit Audi A1, A2, A3,a4,a6,a8 Tt Mudflaps Splash Guards Hoops on 2040-parts.com

Audi Hoops logo mudflaps  Universal fitting mudflaps for front or Rear Free UK Shipping

You are buying / biding on a set of 2 front or rear mudflaps that are universal fitment with a high quality Audi Hoops logo.
These are not factory oe fitment and are not moulded mudflaps.
These mudflaps comes complete with fitting screws which in most case are ready to be screwed straight onto the car.

How to fit & checks before you buy

Firstly check to see if you have around a 10mm flat surface to screw to on the rear bumper arch or front arch
if you do then these mudflaps will just simply screw on but you may need to bore guide hole.
Please note if arches are rolled and you dont have a 10mm sure face to screw to then you will need to use clips for fitting.
These can be bought in any motor factors.

1 First thing to do when fitting is line the mudflaps to the edge of bumper or arch tap in place.
2 If you need to bore guide holes for screws you will need to do this now.
** note : with larger rear wheels you may need to take these of to fit rear mudflaps for the
 wheels on the front you should be fine as you can lock the steering for fitting.
3 Now screw into place and make sure they line up correctly now remove tap and jod is done.

Please note to do the front and rear of the car you will need to buy to 2 of these mudflaps.

The size of the mudflaps are

Lenght on outside 310mm 12inch
width 210mm 8 inch
lenght of flap that can hang below arch or bumper is 125mm 5 inches this can ajusted to suit yourself on fitting..