Find or Sell any Parts for Your Vehicle in USA

Nitrous Oxide Efi Motorcycle Kit 2.5lb Single Bottle Nitrous Kit Cbr on 2040-parts.com

US $279.00
Location:

Englewood, Colorado, United States

Englewood, Colorado, United States
Condition:New Brand:DynoTune OE Spec or Performance/Custom:Performance/Custom Manufacturer Part Number:DynoTune

This DynoTune dry Motorcycle nitrous oxide system will add up to an additional 80HP to your Ride (Power commander needed for 40HP or larger jetting). Comes with eveything you need for a complete installation. This Dry kit uses your bikes EFI sensors to add the additional fuel needed to make the Power! By passing the cool nitrous charge past the Air Temperature sensor in the intake track, we can fool the bikes EFI system into adding the little extra fuel you need to make some sweet power! Note: Consult your factory manual to make sure you have a "Air Temperature" sensor in your intake (Most EFI Bikes have a Temp sensor). Comes with three jet settings of 15HP, 30HP, and 40HP. 

zx10 kits comes with custom bracket adaptors similar to above(gixer shown).

Bottles twist on to mount so changing bottles is a ten second process, great for the race track! Custom painted bottles will no longer be scratched!

The Motorcycle nitrous oxide system Comes complete with instructions on how to use your Horn or starter for nitrous activation making it a clean installation.

The Twin inlet system allows the user to configure the inlet any way they want. Single or dual snorkel intakes, its all in the kit! High Heat/Pressure teflon tubing inculded. 

The Base motorcycle nitrous oxide kit includes the following: 

-- 1 12oz black powder coated Nitrous Bottles (Chrome/Brushed available) 

-- 1 Billet bottle mounting brackets 

-- 1 two foot stainless bradied nitrous lines 

-- 2 Nozzles with mounts 

-- High flow Nitrous Solenoid 

-- Three nitrous jets 

-- Electrical kit with switch, terminals etc. 

-- High Pressure teflon tubing and compression fittings. 

-- Nitrous bottle fill adaptor. Bottles simply twist off in seconds for the ulitmate in quick filling. 

-- Custom CBR1000RR Bracket adaptor

The following options are available: 

-- 20oz bottles:Measure to make sure they will fit your application as the bottles are large! 11.5" long x 3.25" dia. 

-- Diffrent color brackets now available! 

-- Bottle color, Brushed, Gloss black, Show polished chrome

 

ATTENTION!!! NOTE: Old style bracket shown above. All the new brackets shown below 
 
will have the larger round knobs. The knobs are much easier to turn, will not come off, and the brackets are thicker and stronger than ever! It comes with a Gauge port built into the side of the bracket (1/8" NPT threads) plus the standard outlet fitting on the opposite side. (Gauge sold separate) All new kits will come with this style bracket(s).

Note: Mounting a bottle on passenger side of bike requires you to move the rear brake reservoir just a bit.

 

Dont see your application? We build custom kits for ANYTHING! Contact us today!

McLaren 650S Sprint revealed – debuts at Pebble Beach

Tue, 12 Aug 2014

The McLaren 650S Sprint arrives to hit the track The arrival of the McLaren 650S in February (and the end of the 12C, unless it’s being replaced by the McLaren 625C) meant, in all probability, that the various hardcore versions of the 12C would be replicated for the 650S. We’ve already has the new McLaren 650S GT3 at Goodwood this year, and now we get the car that fills the gap between the 650S and GT3 version for McLaren owners to take to the track – the McLaren 650S Sprint. The 650S Sprint – which we assume replaces the 12C Sprint – keeps the 650S’s 641bhp V8 but adds a hefty dose of track specific updates to make the Sprint more focused and with sharper responses.

Bentley considers S-Tronic technology for upcoming V8 Continental

Wed, 13 Oct 2010

Bentley is considering equipping its future V8-powered Continental GT variant with a dual-clutch transmission that sister-company Audi badges as S-Tronic. Bentley's engineers are doing engineering studies on the feasibility of packaging the S-Tronic into the Continental's transmission tunnel. The major challenge is re-engineering and producing the GT's underbody and running gear to accept the S-Tronic, which is a different shape than that of the six-speed ZF that the W12 GT will employ.

2012 Toyota Yaris revealed

Wed, 22 Dec 2010

The 2012 Toyota Yaris debuts in Japan as the Toyota Vitz The headline is probably a bit disingenuous. The car in the picture – as you’ve probably already worked out – is the new Toyota Vitz, the JDM (Japanese Domestic Market) version of the Toyota Yaris. And it’s just been shown in Japan.