Rivco Air Horn System Chrome Horns Harley Davidson Touring Softail Xl Dyna #ahhd on 2040-parts.com
Zieglerville, Pennsylvania, US
RIVCO Air Horns - Harley-Davidson PART # AHHD Fits: All Harley-Davidson models with stock horn on the
left side of the engine under the tank, including: FL Models Electra Glide / Road King / Road Glide FL Model Softails FX Model Softails FX Model Dyna Glides* XL Model Sportsters** Air Horns for Harley Davidsons-Will fit on any
Harley with a left side of the engine, under the tank horn mount. We're the
original manufacturer, and we've been producing world-class quality air horns
for cruiser bikes for over 17 years! Don't get stuck with cheap imitations!
These air horns give a loud warning blast of 128 decibels! Uses the stock horn
button. Can be easily installed in 20-30 minutes. The trumpets are triple
plated chrome as are the mounts and brackets so the shine and finish will last
for years to come. They are completely waterproof. No hole drilling is required
with bolt-on, plug-in installation. Cone shaped covers are included which mount
to the front of the trumpets. Two year unlimited warranty. All kits include two
horns, air compressor, relay, simple wiring and complete installation
instructions. The horns replace the stock horn and the compressor is either
mounted under the seat, behind right side cover or on down tube of frame,
(Different models vary)
The air compressor creates instant air pressure to
the horns. Since the pressure is created so fast there is no need for a storage
tank as on Semi Trucks and RVs. Although the pressure is very low (12-15 psi)
it delivers a large volume of air (3 CFM or cubic feet per minute). This
low-pressure high volume air supply causes the diaphragm inside the horn to
vibrate at a high rate of speed or frequency, the exact speed at which it
vibrates is varied by the length of the horn or trumpet. Together the horn set
produces an extremely loud 128-decibel warning blast. This is approximately 4
times louder than most electric motorcycle horns, which usually rate at 87
decibels. Our Customer Support is Available Please Call Us at 610-754-8500 with Any Questions PAYMENT: WE ACCEPT PAYMENT BY PayPal AND CREDIT CARD, CONTACT US FOR OPTIONS. PAYMENT NEEDS TO BE RECEIVED WITHIN 7 DAYS OF PURCHASE OR THE TRANSACTION MAY BE CANCELLED. WE DO CHARGE SALES TAX IN PA ( 6% ). STATE TAXES WILL BE CALCULATED AT CHECKOUT. CREDIT CARDS: CONTACT INFORMATION: OUR PHYSICAL/MAILING LOCATION IS 315 BIG RD(RT-73) ZIEGLERVILLE, PA 19492 PHONE - 610-754-8500 FAX - 610-754-8501 HOURS - 10-6 Mon-Fri, 10-5 Sat SHIPPING: SHIPPING COSTS ARE FOR THE LOWER 48 STATES (CONTINENTAL USA) ONLY. IF YOU ARE OUTSIDE THE LOWER 48 STATES SHIPPING IS NOT FREE. PENNSYLVANIA RESIDENTS MUST PAY 6% STATE SALES TAX. WE REQUIRE A PHYSICAL ADDRESS BE PROVIDED WITH PAYMENT DEPENDING ON YOUR LOCATION WE WILL SHIP USPS PRIORITY MAIL, UPS GROUND TO MAKE SURE IT GETS THERE ASAP WITHOUT ANY ADDITIONAL COSTS RETURNS: WE OFFER A 60 DAY RETURN POLICY. BUYER PAYS RETURN SHIPPING WE DO NOT ACCEPT RETURNS ON USED OR INSTALLED PARTS PLEASE SEE FULL RETURN POLICY FOR MORE INFORMATION
Electrical Components for Sale
- 1984 honda vf700c vf 750 c vf1100 1100c magna wiring harness (US $35.00)
- Motorcycle ignition contact points for honda cl70, ct70, atc70, xr75, xr100(US $10.79)
- 1982 honda ft500 ascot voltage regulator regulater control bracket mount bolts(US $0.99)
- Battery tender carry pouch large size-#500-0140(US $8.99)
- 04 05 gsxr gsx-r 750 600 ignition coils spark plug sticks tested guaranteed oem(US $29.00)
- 2006 06 honda vtx 1300s - cdi box ( spark box ) for 22 pin connector (US $100.00)
Acura NSX details emerge
Tue, 14 May 2013This morning we know a little bit more about the return of the NSX, which will wear the Acura badge in this incarnation, including where it will be made: Marysville, Ohio. Specifically, in a building adjacent to Honda's Marysville auto plant. The 184,000-square-foot building was once Honda's North American logistics facility, before that it was a seat factory and at one time Honda made transmissions inside.
Nissan 2013 Altima
Wed, 04 Apr 2012The 2013 Nissan Altima has made its world debut at the New York International Auto Show. The vehicle's stance is wide and despite retaining the same wheelbase as the last Altima model, it has increased its front and rear tracks by 1.4-inches and deepened the fenders by 0.8-inches each side. A new grille design and seamless bumper are also new additions.
Whos Where: Peter Schreyer to head Kia Design
Mon, 31 Jul 2006In what's regarded as a major boost for Korean car maker Kia, it has been confirmed that Peter Schreyer will be moving from Volkswagen AG to lead Kia's global design operation. Schreyer will oversee the design activities of the company's regional design centers in Frankfurt, Los Angeles and Tokyo as well as the Namyang Design Center in Korea. While Schreyer's move to Kia comes across as a big surprise for many within automotive design circles, his departure from Volkswagen doesn't.