Find or Sell any Parts for Your Vehicle in USA
Performance & Racing Parts > Auto Performance Parts > Engine & Components > Cylinder Heads

Sbc Splayed Valve Cylinder Heads Complete on 2040-parts.com

US $2,600.00
Location:

Avondale, Arizona, United States

Avondale, Arizona, United States
sbc splayed valve cylinder heads complete, US $2,600.00, image 1
“these heads are complete they were assembled when they came in on engine with rocker see pics”
Brand:cheverolet Warranty:No Manufacturer Part Number:10185040

These heads are in good shape as they are complete with jesel rockers are 1.7 intake and 1.65 ex. springs are new retainers are used titanium.2.200 titanium intake 1.65 ex also titanium. heads are not welded on for repairs .and intake runners are not welded to raise port from factory specs.There is a intake that is a 4500 dominator carb setup.you will also get the cam that goes with these heads that i purchased off ebay to use with this combo to take advantage of the 370cfm intake and 280 cfm ex flow the cam is a lunati grind that is 280 @.050intake 288@.050 ex 794lift intake 750 ex. .022 intake .024 ex lash the intake manifold needs to be cut to use on a std deck sbc block this manifold alone will bring 700.00 but i do not want to sep. it is a custom build from brodix. welded on water neck for a std system the ports on these heads are able to flow a whole lot more with welding modifications but im going a different direction and this is way out of my comfort zone you will also get the roller isky lifters there are no push rods i did not order them yet.  they will come diasembled and all the valves are numbered rockers are also numbered ive seen these heads go for alot more than what im asking so if you want them buy the now and ask me anything about them i will also send you the pistons out of this motor they are used and are std bore and flat tops with a 930 pin and i have no use for them they go with the heads or you can toss them out .my number is 602 486 8556. jeff main no rings or pins thanks  

Aftermarket Car Plug-In Hybrid system developed (video)

Sun, 05 Aug 2012

The Department of Engineering Technology at the Middle Tennessee State University has developed a plug-in hybrid retro-fit system for cars. As hybrid cars show the world that we can get more miles to the gallon from fuel by adding in an electric motor to the mix (depending on just how that electricity is generated, of course), it was inevitable that aftermarket solutions would eventually surface. Now, the Department of Engineering Technology at the Middle Tennessee State University has popped up with what they claim is an after market plug-in hybrid system that can be added to just about any car and would cost – assuming it gets to market – around £2,000.

Jaguar Land Rover build the millionth car at Halewood – a Range Rover Evoque

Sat, 30 Nov 2013

The millionth car produced at Halewood – a Range Rover evoque The Jaguar Land Rover Plant in Halawood was once best know for churning out the now defunct Jaguar X-Type – which it did until the X-Type was pensioned off in 2009 – but more recently its become home to the Land Rover Freelander 2 and the new Range Rover Evoque. And with sales of the Evoque still powering forward it’s no surprise the the millionth car to come off the production  line at Halewood this week is an Evoque. In fact, it’s a white Range Rover Evoque Dynamic with a Fuji White paint job, ebony alloys, Firenze Red roof and mirrors and red and black interior which is being donated to Cancer Research UK.

Caterham announces cut-price Seven 160 sports car

Wed, 23 Oct 2013

BRITISH sports car maker Caterham has announced a new low- priced version of its long-running Seven model. Dubbed the Seven 160, the new model starts at a measly £14,995 in component form or £17,995 fully built. Under the bonnet there is a turbocharged 660cc Suzuki engine and although this only offers up a modest 80bhp, that's still enough to power the lightweight Seven from 0-60mph in 6.5 seconds.

2040Parts.com © 2012-2025. All Rights Reserved.

Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the 2040Parts User Agreement and Privacy Policy.

0.046 s, 12367 u