Find Shok Boat Wrap - Customized for your boat in Naples, Florida, United States, for US $595.00

Condition:New Decal Type:Wrap Country/Region of Manufacture:United States

Sold in directional pairs, one left and one right side.
This wrap purchase is for a boat wrap to fit on a boat that is between 18 feet to 20 feet in length
From the rubrail down to the waterline.**
Longer boats may cost a little more. Smaller boat sizes are fine as well.

We will customize the wrap AFTER purchase to fit the actual year, make and model of your specific boat to show the most available image area to achieve the best visual display.

Our boat wraps can be fitted to accommodate most boat models.

Once ordered and paid for, you will NEED to provide the
year, make, model, length of your boat and a side shot picture
as well as very accurate dimensions.
SEE EXAMPLE OF HOW TO MEASURE BELOW
Please email us with details.
Once you have approved the layout, we will manufacture it and ship within 36-48 hours. All products made on site.

Wrap will have excess in the front and rear as well as the top and bottom to allow for appropriate amount of trim.
Set up to be trimmed at the nose and a few inches around the back toward the motor.

Your graphics color may vary slightly from what you see depending

on you monitor Setting.

(boat not included, ha!)
Material is 3M IJ180 cv3 cast boat wrap vinyl film with 3M 8518 cast overlaminate for maximum UV protection.
Shipping to the lower 48 U.S. only. No shipping to Hawaii and Alaska.

Boat wrap by Wrap Graphics

Please try to follow these instructions to ensure success.

1. Specify the color or design you prefer, such as “Green” or "Diver & Octopus".

2. Submit an image of the boat. Make it a nice side shot like this example.
Submit images and artwork to:

3. Take some dimensions of the boat hull. Be sure to include the length along the rubrail,
the max depth from the rubrail down to the waterline edge where the wrap will end,
then along the hull every 2 feet or so as shown in the diagram.
Take Boat dimensions like this
4. Your wrap print will ALWAYS have more length and width than the actual dimensions
you send for “wiggle room” and proper trimming.

5. Be sure to include the year, make and model of your boat.

6. We submit a final mockup layout for your written approval showing the wrap you
chose superimposed on the image of your boat hull.

Payment types: Visa, MasterCard, AmEx

Pay by Phone (239) 431-7356 Monday-Friday 8am to 5pm (e.s.t)
We can also process payments using paypal

7. Once we receive your approval the finished boat wrap is produced
and shipped within 36 to 48 hours.
YOUR WRAP WILL COME IN A RECTANGLE SHAPE AS SHOWN IN THE ABOVE
EXAMPLE. THIS ALLOWS FOR PLENTY OF TRIM AREA.

** 3b. If you want your boat wrap to go up over the rubrail into the gunwales, or if you want the bow or stern wrapped as well, you need to provide those dimensions as well. This will add to the cost. You can use the below diagram as a reference to ensure your wrap fits and presents itself the best.

We have many variations of our graphics and also provide custom colors upon request.
If you have any questions, Please don't hesitate to call.

MG3 UK details & photos revealed

Thu, 13 Jun 2013

The new MG3 (pictured) arrives in MG’s UK showrooms in the Autumn MG has revealed the MG3 for the UK market at their European Design Centre in Birmingham, ahead of a debut in the UK market in the Autumn. MG are calling the MG3 a “distinctive statement of modern British style” and are aiming it at a youthful demographic looking for ‘something different’. Is the MG3 something different?

UK new car sales hit a ten-year high

Fri, 07 Feb 2014

UK new car sales continue to scale new heights, with more new cars sold in March 2014 than in any month in the past decade. Sales figures released by the Society of Motor Manufacturers and Traders (SMMT) reveal that 464,824 new cars were registered last month – a 17.7% rise over March 2014. It continues the trend of rocketing sales, with year-to-date registrations up 13.7%.

Aston Martin V12 Zagato production debut in Kuwait

Fri, 27 Jan 2012

Aston Martin V12 Zagato production debut in Kuwait The production ready version of the Aston Martin V12 Zagato we first saw at Villa D’Este will be unveiled at the Kuwait Concours d’Elegance in February. Last spring saw the Aston Martin V12 Zagato – spiritual successor to the Aston Martin DB4GT Zagato – arrive at Villa D’Este, looking every bit as good as you would expect an Aston Martin by Zagato to look. There were doubts expressed about whether the v12 Zagato would go in to production – at least publicly – but it was always clear that the V12 Zagato was Aston Martin['s next halo car, following on from the even more extreme (certainly cost-wise) Aston Martin One-77.

Shok Boat Wrap - Customized For Your Boat on 2040-parts.com

Decals for Sale

MG3 UK details & photos revealed

UK new car sales hit a ten-year high

Aston Martin V12 Zagato production debut in Kuwait