Vibro-absorbing Insulation 10x Sheets (mats 11 Sq Ft 0.18" Thickness (4.5mm)) on 2040-parts.com

VIBRO-ABSORBING

Shumoff Mix F (Шумофф Микс Ф)

Vibro-absorbing multilayer paste material consisting of several layers of the high-filled low-weight polymeric composite of black color and a layer of the red-orange low-mass paste with multilayer reinforcement. Covered with tough foil.

Size     0,37 х 0,27 m

Thickness       4,4 mm

Vibro-absorbing material consisting of the combination of several black bituminous mastic layers of high rigidity and lightweight red paste with multilayer reinforcement. This combination of two composites of different density provides unquestionable advantages in the speed of installing and improving the acoustic characteristics of the construction. It is one of the best vibration cushioning materials. It is used for the vibration and noise absorption of the heavy-loaded surfaces with thickness up to 3 mm, e.g. metal entrance doors.

The material has high vibro-absorbing properties and additionally it protects the car body against corrosion. It possesses permanent adhesiveness and high elasticity. It is resistant to environmental factors including moisture and temperature fluctuations. Material’s working temperature range is from -60^оC to +85^оC, short-term exposure to high temperatures +150^оC is possible when the material retains its structural and physical properties. Even when exposed to low temperatures, bituminous layers, due to their structure and composition, retain elasticity and do not become brittle or fragile. Reinforcement layer creates the frame for the elastic materials. During installation, a sheet of the material must be rolled down to the base for the final positioning.

The paste layer’s mounting surface is secured with the release paper, which needs to be removed just before the installing of the material. On the release-layer surface there is a logo acting as a counterfeit protection and a ruling which makes cutting and installing easier. Due to high-quality release paper, the manufacturer guarantees adhesive properties retention for 12 months since the production date. After installation working lifespan is not limited and corresponds to the useful life of a car or any other object providing abidance by the rules of installation and  service instructions.

Our material is produced as a sheet in size 320x270 mm. This sheet format ideally matches car body parts as it decreases the amount of waste materials significantly and increases the installation speed, and the whole process of soundproofing becomes easier. Finished products are packed into the cardboard envelopes or cartons. Due to the sheet’s size and packaging format, it is very easy and convenient to transport, store and use our material.

Specification:

Length, mm	370 ± 5
Width, mm	270 ± 5
Thickness, mm	4.0 ± 0.2
Weight 1 m2/kg	6.5
Material-to-metal bond strength during ply separation, N/cm	5.0
Material resistance to exposure to 100оC temperature for 12 hours	Absence of the material layer separation from the metal plate
Flammability	Non-flammable
Radius of curvature with minus -15oC (bar diameter 25 mm)	Absence of cracks and decomposing