Find or Sell any Parts for Your Vehicle in USA

Wilwood D8-4 Front Polished Brake Caliper Fits 1965-1982 Chevrolet Corvette,c3 on 2040-parts.com

US $346.00
Location:

Camarillo, California, United States

Camarillo, California, United States
Condition:New Brand:Wilwood Placement on Vehicle:Rear Manufacturer Part Number:120-10525-P

Tech Line


775 848-6740



Wilwood


D8-4 Polished Front Caliper


D8-4 Front calipers are a direct bolt on replacement for the OE factory 4 piston front calipers on all 1965-82 Corvettes. Forged billet aluminum bodies, stainless steel pistons, and high temperature seals put an end to the rust, bore pitting, and seal failures that plague the original cast iron caliper design. 


D8-4 calipers mount in the stock location over stock rotors and use the original type D8 brake pads. These calipers fit inside 1967 and later production steel rally wheels and most of the later model alloy wheels. Original steel “JK” code wheels from 1965-66, and some aftermarket alloy replica wheels, will requires a 3/16” or thicker wheel spacer for clearance.   



D8-4 calipers use the same overall piston volumes as the original calipers. Other than a new flexline with an 1/8”-27 NPT end for the new aluminum caliper, no other changes such as master cylinder output or front to rear bias adjustment are necessary.



D8-4 calipers are the product of Wilwood’s in-house FEA design and 3-D modeling technology.With its unyielding strength and superior piston design,the D8-4 generates positive pedal response and high clamping efficiency with a substantial weight savings.  



Product Specifications
Rotor Compatibility
Rotor Width(In):1.25
Maximum Rotor Width(In):1.25
Minimum Rotor Width(In):1.17
Maximum Rotor Diameter(In):11.75
Minimum Rotor Diameter(In):11.75
Brake Pad Specifications
Brake Pad Type 1:D8
Brake Pad Type 2:
Brake Pad Type 3:
Total Pad Area (in²):
Total Pad Volume (in³):3.9
Pad Dimensions & Part Numbers
Pad Dimensions for the D8-4 Caliper Front

Pad Dimensions for the D8-4 Caliper Front zoom image
Piston Specifications
Piston 1 Bore(In):1.88
Piston 2 Bore(In):1.88
Piston 3 Bore(In):
Total Piston Area (in²):5.56
Mounting Specifications
Mount Type:Lug
Mount Side:Universal
Mount Center(In):7
Mount Hole Size(In):
Mount Height(In):1.83
Inlet Thread Size:1/8-27 NPT
Mount Dimensions & Part Numbers
Dimensions for the D8-4 Caliper Front

Dimensions for the D8-4 Caliper Front 



Visit My eBay Store




Performance Brake Calipers for Sale

Range Rover Evoque heads for the Dakar Rally

Sat, 24 Sep 2011

Range Rover Evoque Dakar Rally Land Rover are pretty chuffed with the way the new Range Rover Evoque has been received; feedback from the trade is hugely positive and buyers are queueing up to grab the Evoque – even with its premium prices. So the news that the British Excite Rally Raid Team will be running the Evoque in the Dakar rally will be a nice bit of off-road gloss to add to the street cred the Evoque already has in spades. The Dakar Rally is the world’s toughest car competition, run over gruelling terrain between Paris and Dakar.

New Peugeot 108 Hatch & Top! Cabrio on sale July – costs from £8,245

Thu, 01 May 2014

The new Peugeot 108 (pictured) on sale July 2014 The Peugeot take on the Toyota Aygo and Citroen C1 – the new Peugeot 108 – is going on sale in July in the UK and will cost from £8,245 for the 1.0-litre three-door in Access trim, topping out at £12,245 for the 1.2-litre Allure five-door. Not only is there a choice of three-door and five-door 108s, there’s also a choice of two engines -a  68bhp 1.0-litre 3-cylinder and the new 1.2-litre PureTech VTi – and four trim levels - Access, Active, Allure and Feline  - although you’ll have to settle for Active or Allure if you want the Top! Cabrio.

Kia readies new minivan after Sedona exits in 2013

Wed, 16 May 2012

Kia has dropped its Sedona minivan for the 2013 model year, but the automaker expects to return to the segment. Kia spokesman James Hope confirmed the Sedona's departure. He said Kia likely will field another people mover but he declined to say when or what it might look like.