Find or Sell any Parts for Your Vehicle in USA

Wilwood D8-4 Rear Brake Caliper Fits 1965-1982 Chevrolet Corvette,c2,c3,vette - on 2040-parts.com

US $346.00
Location:

Camarillo, California, United States

Camarillo, California, United States
Condition:New Brand:Wilwood Placement on Vehicle:Rear Manufacturer Part Number:120-10526-P

Tech Line


775 848-6740



Wilwood


D8-4 Rear Caliper


D8-4 Rear calipers are a direct bolt on replacement for the OE factory 4 piston rear calipers on all 1965-82 Corvettes. Forged billet aluminum bodies, stainless steel pistons, and high temperature seals put an end to the rust, bore pitting, and seal failures that plague the original cast iron caliper design. 


D8-4 calipers mount in the stock location over stock rotors and use the original type D8 brake pads. These calipers fit inside 1967 and later production steel rally wheels and most of the later model alloy wheels. Original steel “JK” code wheels from 1965-66, and some aftermarket alloy replica wheels, will requires a 3/16” or thicker wheel spacer for clearance.   



D8-4 calipers use the same overall piston volumes as the original calipers. Other than a new flexline with an 1/8”-27 NPT end for the new aluminum caliper, no other changes such as master cylinder output or front to rear bias adjustment are necessary.



D8-4 calipers are the product of Wilwood’s in-house FEA design and 3-D modeling technology.With its unyielding strength and superior piston design,the D8-4 generates positive pedal response and high clamping efficiency with a substantial weight savings.  


Product Specifications
Rotor Compatibility
Rotor Width(In):1.25
Maximum Rotor Width(In):1.25
Minimum Rotor Width(In):1.17
Maximum Rotor Diameter(In):11.75
Minimum Rotor Diameter(In):11.75
Brake Pad Specifications
Brake Pad Type 1:D8
Brake Pad Type 2:
Brake Pad Type 3:
Total Pad Area (in²):
Total Pad Volume (in³):3.9
Pad Dimensions & Part Numbers
Pad Dimensions for the D8-4 Caliper Rear

Pad Dimensions for the D8-4 Caliper Rear zoom image
Piston Specifications
Piston 1 Bore(In):1.38
Piston 2 Bore(In):1.38
Piston 3 Bore(In):
Total Piston Area (in²):3.00
Mounting Specifications
Mount Type:Lug
Mount Side:Universal
Mount Center(In):5.16
Mount Hole Size(In):0.47
Mount Height(In):2.99
Inlet Thread Size:1/8-27 NPT
Mount Dimensions & Part Numbers
Dimensions for the D8-4 Caliper Rear

Dimensions for the D8-4 Caliper Rear 



Visit My eBay Store








Performance Brake Calipers for Sale

Goodwood Revival

Thu, 19 Jul 2007

By Ben Whitworth Motor Shows 19 July 2007 02:30 The tenth Goodwood Revival, held this year from 31 August to 2 September, looks set to once again establish itself as the world’s finest historic motor racing event. The world’s only sporting event set entirely to a period theme – no vehicles produced after 1966 are allowed on the circuit and its environs throughout the weekend – this year’s Revival will be bigger and better than before, according to Lord March. “The Revival is arguably the most popular historic motor racing event in the world,” Lord March told CAR Online.

Pebble Beach: A weekend of paradise for car guys

Fri, 14 Aug 2009

Just once before you die (or every year until you die, your choice), you have to go to Monterey for the Big Car Weekend. If you've never been, no words can suffice. If you have been, you don't need any words, and you've packed the Packard and are ready to hit the highway.

Barry Meguiar released from hospital, spent 8 days in a coma

Wed, 01 Sep 2010

Car enthusiast Barry Meguiar has been released from the hospital in Monterey, Calif., after 17 days of treatment for a rare form of viral pneumonia. Meguiar, 67, left the hospital on Aug. 30, according to a press release issued on Wednesday.