Diy Frame Jig Harley Sportster Hardtail Chopper Bobber Hardtail Xs650 Ironhead on 2040-parts.com
Wauseon, Ohio, United States
|
Chop Source Standard DIY Frame Jig Kit.
The Standard Frame Jig Kit includes all of the fixtures and hardware you need to get your table-top frame jig started. You need to supply about 21.5' of 2"x3" or 2"x2" tubing (1/8" wall) for the jig. See the assembly instructions for more details. Structural tubing can be found at local metal supply shops or at welding/fabricating shops. The frame jig kit bolts together so you can break it down and store it easily when you aren't using it. No welding required except for the nuts on the leveling feet. The neck fixture will accommodate rakes from 15 degrees to 60 degrees.
The Standard Frame Jig Kit Includes:
- Neck Fixture
- Axle Plate Fixture
- Two Base Clamps
- 1018 Mild Steel Neck Cones (can upgrade to stainless steel cones).
- Feet Kit
- Internal Center Fixture
- 3/4", Threaded Rods and Spacers. (other sizes available from us see our other items)
MADE IN USA
|
Frames for Sale
Ultima 200 series wide softail style frame 34 deg rake/2" stretch, radius struts(US $649.95)
Dimotiv damper mounting bracket kit (matris) honda cb400sf abs 96-16(US $169.98)
Dimotiv damper mounting bracket kit (matris) honda cb400sb abs 04-15(US $149.98)
Dimotiv damper mounting bracket kit (matris) honda stx1300 03-15(US $169.98)
Dimotiv damper mounting bracket kit (matris) honda hornet250 96-08(US $169.98)
Ducati 748 916 996 998 subframe track(US $40.00)
GM moves Nesbitt back to design group in management shake-up
Tue, 02 Mar 2010General Motors has made big changes to its top management structure, splitting apart its sales and marketing activities and naming new bosses for each discipline. The goal is to reduce layers of management under Mark Reuss, GM's president for North America. Among the key changes: -- Designer Bryan Nesbitt, who was made chief of the Cadillac brand last fall, is going back to the design group.
London Congestion Charge: Buy 76-100g/km car NOW to get 3 years free of charge
Mon, 29 Apr 2013Whether you think the London Congestion Charging Zone is a great way to clean up the air quality of the capital or just another way to tax motorists, you’re going to struggle even more to avoid it after the emission exemption levels are changed on 1st July so only cars emitting 75g/km CO2 or less will be exempt from the charge, Boris says the new lower level is necessary because car makers have worked their socks off to produce small diesel cars with the ability to hit the magic sub 100g/km emissions level in recent years, and that means London is suffering from air pollution as a result. The only answer, apparently, is to drop the limit to 75g/km or less to make those ‘dirty’ diesels pay their way. By reducing the limit to 75g/km you are effectively only allowing EVs and Plug-ins an exemption from congestion charging, thereby moving their emissions off to wherever the electricity they use is produced.
Eric Clapton’s Ferrari SP12 EC ‘Official’
Sun, 27 May 2012Eric Clapton’s new Ferrari was all over the place in March as it sat in pride of place in a glass box at H.R. Owen’s in London. Except officially it wasn’t God’s new Fezza as Ferrari weren’t offering up any official information.