Jaguar E-type, Xke Rear Lower Valance Section - Rh - Correct Shape - These Fit! on 2040-parts.com
Elkton, Maryland, US
Jaguar E-Type - all 6-cylinder - LH Rear Lower Valance - SECTION
This is the FORWARD SECTION of a RH Rear Lower Valance panel for the Series 1 E-Type. This panel is patterned after an original Series 1 E-Type, but is the same on all 6-cylinder cars - Series 1, 1.5, and 2. It is correct in every dimension - including the thickness, the location and angles of the bends and flanges, and curvature. We recently went to GREAT LENGTHS to make sure that these panels are EXACT - I had patterned this last year, but out of 7 shells in the shop at that time, all 7 were different! Recently, we took in a '68 OTS that was untouched in these panels, and also got hold of an original NOS replacement panel - so we refined the pattern, and we KNOW it's correct now - and they are fitting the shells beautifully! This section is approx. 4.5 inches wide behind the wheel, and goes from the bumper seam, all the way down and under to the boot floor seam. We find that this is PLENTY of material to repair even the WORST rust we see in this area. We recommend fitting this panel, and trimming it down to use as little of the panel as possible - usually, 2 inches behind the wheel is just about right. Repairing the rear lower valance in this way is often a much better option that replacing it entirely - which requires the opening of leaded seams in the rear of the boot panel. This panel is 100% CORRECT in it's shape, costs less than the complete lower valance, and is SUBSTANTIALLY less work to install! NOTE: We also have the rear "wall" of the inner wheelhouse available - the bottom edges of it usually rust where it meets the rear lower valance - see our other auctions.
MORE ACCURATE than anything else out there!
These panels are just "kind of the right shape" when supplied by other manufacturers - the edge of the wheel arch swings forward as it goes down, and it looks weird... This panel is delivered in fresh, bare steel, ready for the quality primer and paint of your choice - you will not have to spend time stripping off the low-quality, black "shipping primer" that some other manufacturers use...
See our other auctions - MANY panels are available for E-Type Shells and Bonnets!
Google us! - our blog entries contain thousands of photos of E-Type shell restoration!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MONOCOQUE METALWORKS
Monocoque Metalworks is a fabrication shop located in Northeastern Maryland that specializes in Jaguar E-Type (XKE) body shell restoration. If you are restoring your E-Type, the best place to start is a rock-solid bodyshell (or tub), and we can help! We offer services ranging from the fabrication of a single panel to the construction of an entirely NEW bodyshell!
FABRICATION AND SHIPPING OF ORIGINAL OR CUSTOM BODY PANELS – we have patterns and examples of nearly every E-Type panel and can fabricate any panel you need for your restoration. Before you spend hundreds (or thousands) of dollars on Martin Robey panels that may or may not fit properly, give us a try! OR, call us as the ONLY supplier of many of the smaller, internal panels that Martin Robey doesn’t supply (or lists in their catalog but don’t actually produce…) Want some extra holes punched? – or some original holes not included? – or the panel produced in a heavier gauge? - no problem!
COMPLETE RESTORATION OF YOUR TUB – we will take in your monocoque bodyshell, strip it down to bare metal, and replace all damaged or rusted panels using the proper techniques. Your shell will be returned to you in primer, dead straight, rock-solid, safe, and EXACTLY as it left the factory.
TUB EXCHANGE – looking to save time? Exchange your existing monocoque bodyshell for one of our already restored shells (subject to availability). You’ll arrive at the shop, unload your shell, and load up a completely restored, PERFECT shell and be back on your way in a few hours! With this service, we can cut your project time down by YEARS! Plus, you can exchange one body style for another – drop off a Coupe or 2+2 shell and take home a roadster!
TUB MODIFICATION – we can “beef up” your tub with heavier gauge components for vintage racing, or add complete sub-frames, roll bars or cages. If you can imagine it, we can fabricate it!
FABRICATION OF AN ENTIRELY NEW TUB – we can build you an entire floor assembly with sills, gussets, tunnel, etc. – a complete cowl/firewall assembly – or an entirely NEW bodyshell!
COMPONENT RESTORATION – We will happily restore any piece you care to ship us and return it to you in as-new condition. This includes, but is not limited to: bonnet components, heaters, door shells, decklids, coupe hatches, etc.
E-Type restoration is a labor of love at Monocoque Metalworks! The shop is outfitted with INDUSTRIAL GRADE MACHINES – many of which are vintage machines themselves – carefully restored and modified with the correct tooling to produce perfect E-Type panels. As a result, you will be amazed by the crisp cuts, straight bends, and perfect holes found on our panels! We have forming capabilities that include shearing, braking, rolling, wire-edging, bead-rolling, notching and punching – in aluminum, steel, or stainless steel - up to and including 16-gauge (.060) or beyond. We utilize a combination of MIG, TIG, Spot, and Plug welding to ensure that your car is assembled with factory-like originality, coupled with strength and safety you can depend on!
Over 25 years of automotive restoration experience, specializing in E-Types. My first car was a 3.8 roadster, and I have driven, raced, wrecked, and restored these cars ever since. I know the cars intimately, and can provide references attesting to that fact. However, restoring the E-Type’s monocoque shell has always been my true passion! Let me indulge myself on your project – you will not find a more experienced and enthusiastic partner for your restoration!
BOOK your complete shell restoration NOW! We are busy with multiple E-Type shells and bonnets all the time, and spots book up quickly - so don't wait to call! We have restorable Series 1 and 2, Coupe, roadster and 2+2 tubs with straight roofs and quarters in stock - plus a large selection of doors, decklids, hatches, hinges, bonnet pieces, etc. Don’t wait until your car is all stripped down – call now and we’ll start building a solid tub TODAY and exchange it for yours when it is ready!
Located just outside of Newark, DE, with easy access to I-95. No job is too big or too small! Give us a ring and let’s discuss your project – whether it’s one panel or the restoration of an entire body shell, we can handle it – with the attention to detail and ENTHUSIASM you’re looking for!
Monocoque Metalworks - (443) 907-2287 - Chuck
References available – or come visit the shop and I’ll show you our tools and skills in action!
Other Parts for Sale
Jaguar e-type, xke rear wing repair section - lh - correct shape - these fit!(US $85.00)
Jaguar e-type, xke inner rear wheel arch edge section - lh(US $82.00)
Jaguar e-type, xke rear lower valance section - lh - correct shape - these fit!(US $115.00)
Jaguar e-type, xke rear wing repair section - rh - correct shape - these fit!(US $85.00)
Napa bearings brg lm67049a - m/trsax input shaft bearing cone(US $13.31)
Napa bearings brg lm67048 - transfer case front output shaft bearing cone(US $10.65)
Fisker ‘Project Nina’ to debut at New York Auto Show
Thu, 22 Mar 2012Fisker's Project Nina teased ahead of the New York Auto Show The ‘Project Nina’ from Fisker – a smaller take on the Karma – will debut at the New York Motor Show in April. It’s taken a very long time for Henrik Fisker to get the Karma out to the public, and even then it looks like it still wasn’t really ready to go, with reports of faults and breakdowns already starting to filter in from the handful of Karma owners. But the next stage of Fisker’s evolution in to a fully fledged maker of range-extending EVs is ‘Project Nina’, a smaller car that the Fisker – thing 3 Series – which has been funded to a great degree by the US taxpayer.
Mercedes SLK (2011/2012) teased
Fri, 08 Oct 2010The 2012 Mercedes SLK - the tease begins I know, it’s what all car maker now do; tease the launch of a new car. And we’re probably to be blame. No, not Cars UK specifically, but online Car Magazines in general.
Ford Announces Dates For 2014 Free Driver Training
Mon, 01 Sep 2014FORD has revealed the latest dates and locations for its 2014 Driving Skills for Life free training programme. The programme is targeted at inexperienced drivers who have recently passed their driving test, highlighting some of the dangers they are exposed to as new drivers and how they can be minimised. This includes using a mobile phone at the wheel, managing emergencies and night and wet-weather driving.