Schwartz Full Frame Chassis For 1964-1972 Gm A-body, Chevelle, Gto, 442, Gs on 2040-parts.com
Cleveland, Tennessee, United States
|
Schwartz Performance 1964-1972 GM A-Body Chassis (Chevelle, GTO, Cutlass, Skylark, El Camino and Wagons) G-Machine Chassis #1 Schwartz Performance Chassis Dealer You are bidding on a "basic" chassis only, call for adding Brakes, rearend and shocks. This chassis, now available for 1964-1972 vehicles, has been upgraded to full mandrel bent frame rails. This not only provides a much sleeker and refined look, it adds even more strength to an already solid chassis, allowing us to remove much of the cross-bracing in the center of the chassis. This opens up your cars underside to new routing options for exhausts, brake lines and fuel lines. Base CHASSIS includes:
Payment terms: 75% down at time of order, remaining 25% due before shipment.
A-body chassis features:
Mandrel-bent 2x3 main frame rails. 125lb LESS than stock frame w/complete suspension. 200% less flex torsionally than stock frame. 1.08G tested on skidpad under a '66 Chevelle. Up to 275 tires up front, up to 345 wide tires in rear with minitub. Uses stock front inner fenders. Motor mounts available for Chevy, Pontiac, & Olds engines.
Only things needed to be done by customer/builder: Exhaust system (we have stainless headers available for LSx engines), fuel tank (rails are narrowed 3" on each side from stock), & steering shaft (we can supply pieces to connect to a column). Installation is simple.Unit being sold as an unassembled rolling chassis. Unit will come with all hardware required for assembly. CALL FOR PRICING ON REAREND, BRAKES AND SHOCKS.....NOT INCLUDED IN THE BASIC CHASSIS Standard features of ALL chassis:
Brakes: Wilwood 6 piston front calipers, Wilwood 4 piston rears. 13x1.25" rotors up front, 13x.810 rears.
(Optional 14" Baer 6P, 6S, or 6R). Braided stainless hoses.
Front suspension & steering: 15:1 power rack & pinion, fox-body style. Greasable needle bearings in upper control arms for full articulation with no bind. Schwartz-fabricated spindles & lower control arms. Strut rod type lower a-arm setup. Ridetech single-adjustable coilover shocks. NASCAR style 1" splined sway bar w/billet arms, adjustable links. Teflon-lined spherical rod ends tie suspension to frame for much less bind than polyurethane bushings, & teflon is self-lubricating so it's quieter than standard rod ends.
Rear end & suspension: Moser HD stamped full-floating 9" rear end housing, 31 spline axles, Detroit Truetrac diff w/choice of gear ratio. Ridetech single-adjustable coilover shocks. NASCAR style 3/4" splined sway bar w/billet arms, adjustable links.
Other options: Powdercoat in just about any color. Lifetime guaranteed brake hard lines installed. Engine mounts supplied. We're also a Tremec dealer & have many LSx engine packages that can be supplied & installed in the chassis. Dealer for Forgeline & D2Forged wheels. Upgrades available for brakes, rear end, & coilovers.
Other features: Adjustable transmission mount included. Motor mounts available for SBC, BBC, LSx. Custom built-to-order, so it can be customized to suit customer. All chassis are custom built to order with a precision jig. NOTE: Stock type suspension parts, engine mounts, or rear ends will not bolt to these chassis! |
Other for Sale
Schwartz performance chassis, 1958-1964 gm x-frames; impala, biscayne, ect(US $9,674.00)
Schwartz performance chassis, 1968-1974 nova(US $9,274.00)
55-70 corvette stage 1 small block short water pump 13303 pc(US $99.99)
Toyota starlet ep8, ep8 gtt, front and rear suspension polyurethane bushes(US $139.00)
Billet battery hold down for optima battery track day ready gear headz products(US $74.95)
Qa1 tubular upper control arms gm f-body 1970-81(US $422.49)
Chevy Volt MPG: Shocking!
Tue, 11 Aug 2009I love the Internet. Specifically, the comments sections on big stories like the Chevy Volt. And it is the same on every site: The first two comments are fairly sensible and actually relate to whatever the story is, then everybody just starts eating each other's young and blaming the government for everything.
Ford Racing offers B-Spec kit for the Fiesta
Mon, 12 Mar 2012While a B-Spec Ford Fiesta might seem like unsalted mashed potatoes compared with Ken Block's Hybrid-Function Hoon Vehicle variant, the basic car is plenty of fun when equipped with a manual transmission and shod with some good summer rubber. As such, Ford Racing is offering a kit to convert a showroom-fresh Fiesta hatch into an affordable racer eligible for SCCA, Grand-Am and World Challenge B-spec competition. The main mod involved is a coil-over suspension kit.
Making the list: AW's Holiday Gift Guide
Mon, 07 Dec 2009We're sure there's a gearhead or two on your shopping list for the holidays. Or maybe you just want to eliminate the uncertainty and give yourself a gift. Either way, we're happy to offer some inspiration on clothing, tools and cool things to get for your high-octane friends and family.