Find or Sell any Parts for Your Vehicle in USA

Hifonics Goliath 35th Aniv 3000 Watt Rms Competition Car Mono Amplifier Amp on

US $549.95

Inwood, New York, United States

Inwood, New York, United States
Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ... Brand:Hifonics Channels:Mono MPN:GOLIATH-35 RMS Power:3000W UPC:806576225133 Country/Region of Manufacture:China Model:GOLIATH-35

HIFONICS Goliath 35th Anniversary 3000 Watt RMS Competition Mono Amplifier

main image
Click Thumbnails to Enlarge

Condition and Warranty



Product Description

Authorized Hifonics Dealer!

Goliath Super D-Class™ Mono Block
Goliath is a traditional mono amplifier designed around Hifonics Super D-Class™ topology. Similar to Colossus in design, the Goliath allows Multiple mono amplifiers to be strapped together utilizing the Master/Slave feature to create a large subwoofer system that will well exceed 6000 watts RMS.

Signal Path

The signal path for Goliath uses the same ParaQ™ circuit to control the bass equalization. Colossus, Goliath and Helios offer an additional output set of RCA jacks to eliminate the need for splitter cables. Again, the Hifonics engineers try and eliminate the additional signal paths that can affect sound quality by raising distortion levels.


  • HIFONICS Goliath 35th Anniversary 3000 Watt RMS Competition Car Mono Amplifier
  • Pre-Amp Circuitry: Low Noise PreAmplifier - Low voltage signal from the source unit comes into the amplifier pre-amplifier circuit with minimal distortion
  • Inputs: Tiffany Style RCA Connectors - Audiophile signal quality and maximum signal throughput with minimum distortion and maximum external noise rejection
  • Operation Mode: One Channel (Mono) - Mono mode is intended for subwoofers only
  • Crossover / Signal Shaping: Accu-Cross & XCurve (X1/X10) - Accu-Cross crossovers allow for complete control of the signal directing to all speakers. XCurve allows for chosen frequencies to be as stated (X1) or multiplied by 10.
  • Equalizer: ParaQ - Parametric Bass EQ with adjustments: Boost (0-10dB) Width (Narrow-Wide (On Center) Center Frequency (30Hz - 100Hz)
  • Class / Topology: Ultra D-Class™ - The proprietary "Ultra D-Class” design uses high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels. Hifonics Ultra D-Class results in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs.
  • Output Devices Technology: Ultra-Fi™ MOSFET - The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion
  • Heat Sink: Aluminum - Heavy duty aluminum alloy heat-sink efficiently moves heat from the MOSFET where it can be cooled without the need for fans
  • Power Supply: Twin turbo - The Twin Turbo Coil PS is a Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
  • Strapping: Yes - Power Strapping allows the installer to Sync the input signal and output power to double rated output of a mono amplifier to drive a single or group of subwoofers. Driving subwoofers with this method doubles the available power to the overall bass system, while insuring each subwoofer receives the exact same power level. CONSULT PROFESSIONAL INSTALLER.
  • Bass Remote: Diagnostic Bass Remote Included - The Hifonics SUPER AMPS include a specialized Bass Remote that allows remote adjustment of the gain for the ParaQ bass equalization feature. Also critical is the Diagnostic ability of viewing the amplifier status on the L.E.D's of the remote
  • Remote Status: Visualize Amplifier Signal The remote also includes a clip indicator on the remote that mirrors what is visible on the amplifier end panel. This allows the user to see the output status of the amplifiers signal. There is one multi-color L.E.D that will show Green, Amber or Red. Green = Amplifier outputting clean signal. Amber = Amplifier outputting a "soft" clip signal which is a non-audible distortion only measurable on an oscilloscope. Red = Amplifier is putting out a "hard" clip signal. This is audible distortion and can damage speakers.
  • Output Connections: Nickel-Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  • Connections Type: Molded & Angled - Hardened composite mounting with secure connection for all Power, Ground and Speaker connections. Angled for ease of access during installation
  • Signal Pass Through: Yes - One pair of Tiffany style connectors for a full range, L & R output allow distortion free signal to be passed through this amplifier to feed that signal to other components without the need for noise generating Y cables
  • Diagnostics: Three-stage protection circuits - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  • Illumination: Yes - Hifonics logo and both the input and output side of the amplifiers connections


  • Class: Super D-Class™
  • Variable Voltage: 9 - 0.2V
  • Signal to Noise: >90dB
  • Frequency Response: 15-250Hz
  • Crossover Type: Electronic
  • Low Pass Crossover: 12dB Per Octave 35Hz-250Hz
  • Tone Control: ParaQ
  • Bass Boost: Parametric 30-100Hz , Wide-Narrow / 0-10dB
  • Subsonic Filter: 15Hz-35Hz
  • Power @ 1-Ohm: 1 x 3000 RMS , 1 x 6000 Peak
  • Power @ 2-Ohms: 1 x 1500 RMS , 1 x 3000 Peak
  • Power @ 4-Ohms: 1 x 750 RMS , 1 x 1500 Peak
  • Total Channels: 1
  • Audio Inputs: Set #1: Full Range RCA , Set #2: MST/SLV RCA
  • Audio Outputs: Yes, RCA
  • Power Terminal: 12v/GND 0 gauge
  • Speaker Terminal Wire Gauge: 12g
  • Fusing: Use external 250
  • Certifications: CTA-2006-B Compliant
  • Product Weight (lbs): 21
  • Product Weight (kg): 9.4
  • Product Dimensions (in): 26 x 11.7 x 4.9
  • Product Dimensions (cm): 66 x 29.7 x 12.5

 Advantages of purchasing from an authorized seller:

  • Best prices - We sell all Hifonics Products at the lowest price as possible.
  • Full Factory Warranty
  • Detailed information of all products
  • Lifetime Customer Service by Hifonics product Experts
  • Guaranteed legitimate and authentic merchandise

Please note: If you purchase Hifonics from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

Return Policy

AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer a friendly return policy.

Prior to returning merchandise, contact us and we will give you a return authorization #.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

Defective items:
If your item is defective within the first 30 days of when it was delivered to you; you have the following options:

  • We will send you a pre-paid shipping label to replace the item for a brand new one.
  • We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
  • We will refund you 100% of your money back. For refunds it is the customer's responsibility to ship the item back to us.

Non-defective items:
If you want to return your item within the first 30 days of when it was delivered to you; you have the following options:

  • You may exchange the item for another item of your choice. If the item you choose is more or less money we will work out the price difference with you. The customer is responsible to ship the item back to us. Please note if the item you return is used there will be a 10% restocking fee deducted from your credit.
  • You may receive a refund for the item less a 10% restocking fee. Customer is responsible to ship the item back to us.

Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. This includes blown speakers with burned voice coils. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.

Item Code: GOLIATH-35

Amplifiers for Sale

Mercedes C-Class Coupe: Geneva 2011 catch-up

Sat, 05 Mar 2011

Mercedes C350 BE C-Class Coupe on the Mercedes stand at Geneva The 2011 Mercedes C-Class Coupe does look very impressive on the floor at Geneva. But we do worry about how Mercedes are going to market it. It just doesn’t seem to fit.

Ford halts plans for rwd cars

Sun, 11 Jan 2009

With demand uncertain for big cars in the years ahead, Ford Motor Co. has dropped plans for new rear-wheel-drive sedans. Ford design chief J Mays told Automotive News on Sunday that plans for rwd Ford and Lincoln sedans have been shelved.

FAB1 Rolls-Royce Ghost for Classic Motor Show

Thu, 14 Nov 2013

The FAB1 Rolls-Royce Ghost Extended Wheelbase is no stranger to us at MSN Cars. Our esteemed managing editor, Tim Pollard, once spent some time in it, hobnobbing with the likes of Chris Evans, James May, Gary Barlow and Brian Cox. Back then it was on its way from Land’s End to John O’Groats, helping to launch a campaign aimed at raising £1 million for Breast Cancer Care.