YOU ARE BIDDING ON A SET OF TOP QUALITY, TOP OF THE LINE GOODFABS STAINLESS STEEL TRI-Y HEADERS FROM A TOP TOYOTA SHOP FOR THE NASCAR TOYOTA HEADS. THESE ARE CUSTOM MADE BY GOODFABS IN ENGLAND AND ARE VERY HIGH END. THESE CURRENT FLANGES ONLY FIT THE TOYOTA TRD STYLE HEADS THAT THE NASCAR TEAMS ARE CURRENTLY USING. YOU CAN ALSO CUT THEM UP FOR USE IN OTHER APPLICATIONS, CHANGE OUT THE FLANGES OR USE THE TUBING TO MAKE YOUR OWN CUSTOM HEADER SET. THESE HEADERS ARE 1.875" PRIMARY TUBES STEPPED TO 2.00" INTO THE "Y" PIPES, 2.375" AT THE REAR OF THE "Y" PIPES ALL LEADING TO A 3.500" OUTLET THRU A TRI-Y COLLECTOR. SERIAL # MATCHED SET. THIS IS A SET OF FULLY TUNED HEADERS ALL MOUNTED ON A MACHINED BILLET HEADER FLANGE. ENTIRE SET UP IS TIG WELDED. THESE HEADERS ARE IN GREAT SHAPE WITH NO SIGNIFICANT DENTS AND NO PAVEMENT SCRAPES AND VERY MINIMAL MINOR DINGS IF ANY ARE EVEN PRESENT (ONLY 2 WERE FOUND DURING A VISUAL INSPECTION AND BOTH ARE SHOWN IN THE LAST 2 PICTURES. THESE ARE A NON ISSUE FROM TYPICAL USE AND JUST WANTED TO CALL THEM OUT). ONE IS A FLAT DENT/IMPRESSION ON THE 3rd TUBE BACK ON THE RIGHT SIDE HEADER WHERE IT MAKES THE STEP FROM THE 1.875" TO 2" TRANSITION AND THE OTHER IS ON THE SIDE OF THE RIGHT SIDE "Y" PIPE WHERE IT MAKES THE TURN. YOU WILL NEED TO ADD 4 SMALL BOLTS FOR THE TABS THAT CONNECT THE PIPES TOGETHER. THESE ARE EITHER FLAT DENTS OR WERE PUT THERE FOR CLEARANCE. NORMAL EXTERNAL HEAT DISCOLORATION AND MARKINGS AS PICTURED FROM TYPICAL USE. WOULD COST OVER $4,560 TO DUPLICATE. GET A SUPER BUY HERE ON A RARE DEAL OF TOP OF THE LINE STAINLESS HEADERS FOR THE NASCAR TOYOTA ENGINE. JUST SHOOT US AN E-MAIL IF YOU NEED ANY PARTICULAR MEASUREMENTS FROM A CERTAIN REFERENCE POINT. YOU ARE BIDDING ON THE EXACT SET PICTURED.

INTERNATIONAL, HAWAII, ALASKA & PUERTO RICO SHIPPING EXTRA