Oxygen Senser Bung And Plug Kit Mild Steel Plug&stainless Steel Bung+ Washer on 2040-parts.com

Steel Plug (gold zinc) 

Copper sealing washer 

MADE IN U.S.A.

SHOW QUALITY PLUG WITH 5/16 INTERNAL HEX

CK MY OTHER LISTING UNDER HPBRIAN FOR OTHER PLUGS AND BUNGS IN STAINLESS AND STEEL

M18mm x 1.5mm thread - fits all O2 sensors in American, Japanese, European, cars, trucks, motorcycles - everything!

• fits narrow and wideband sensors (works with innovate ,AEM,Zeitronix,FJO ..... ALL sensors)
• STEPPED/shaped to fit against exhaust tubing with No grinding needed on exhaust tubing, With our bungs just drill a 7/8" hole with a step drill and weld the bung on.  Save labor $ AND get a better fit!
• Mild steel bung and 303 stainless plug, plus copper sealing washer. THIS IS WHAT THE TUNERS NEED TO USE WHEN CHECKING AIR/FUEL RATIO. USE ONE IN EACH EXHAUST PIPE.  Many people use these bungs with all types of steel tubing with no problem because the bung is much thicker than the tubing it works well. Normal mild steel welding rod/filler/wire can be used to weld these to stainless.    
• CORRECTLY DIMENSIONED -thick enough so it won't warp when welding, CORRECT LENGTH so that the sensor is in the exhaust stream but not too far, so it does not obstruct flow, this is important as most of our customers are tuners and want max performance. Beware some other bungs or nuts are to thin, they will warp and leak or ruin the threads and they are a big pain to weld to round exhaust pipe.
• 1 to 100,000 VALUE Pack available here : 

MILD STEEL,, O2 BUNGS

STAINLESS 303 STEEL PLUG ,,

COPPER SEALING WASHER

•  We have THOUSANDS in stock in CALIFORNIA , no waiting for them to ship from overseas etc.
• NEED SOME CUSTOM BUNGS MADE JUST FOR YOUR MANUFACTURING NEEDS?
• How good is this product?=we sell to the largest catalitic converter company in the world
• CALL 714-287-2205 for custom orders and bulk rates
• shipped by USPS first class mail

  see our other auction to order

DIAMENTIONS OF THE BUNG ARE = .430 TALL WITH THE STEP, (.300 w/out step) X 1.00 WIDE M18mm X 1.5mm THREAD, MILD STEEL

INSTALATION REQUEIRS A 7/8" HOLE IN EXHAUST PIPE WITH A STEP DRILL, THEN WELD

PLUG = .450 TALL,  M18mm X 1.5mm, 5/16" HEX, STAINLESS STEEL

WASHER = 18MM X 24MM X 1.5MM. COPPER

Shipment is made by USPS first class mail flat 301.1.0 rate, next day or same day by 12:00am If for any reason you have a problim getting your item please let me know as soon as possible