Jaguar E-type, Xke Sill Rear Closing Panel - Rh - Bd20162 Section on 2040-parts.com

This is one RH Sill Rear Panel that forms the outer edge of the rear bulkhead, directly forward of the rear wheel - it is one section of Jaguar Part # BD20162, which is the entire rear lower bulkhead panel and runs the entire width of the car.  It fits all short-wheelbase Series 1, 1.5, and 2 cars, including Coupes (FHC) and Roadsters (OTS).  It does NOT fit 2+2's, or long-wheelbase cars.  It is formed from cold-rolled steel and patterned after the original piece.  It is guaranteed to be correct in every dimension, including the thickness, curvature, and hole size, shape, and placement.  The panel is delivered in fresh, bare steel, ready for the quality primer and paint of your choice - you will not have to spend time stripping off the low-quality, black "shipping primer" that some other manufacturers use...

            The version of this panel from other suppliers is formed incorrectly!  This is another panel that we are only just now offering, because it has taken us this long to get the pattern right!  The curvature of the outer edge is critical, and on other supplier's version of this panel, it is located wrong and does not fit the outer sill very well.  This either results in one of two nightmares - you put the outer sills on first, and then find that this panel is too large and cannot be fitted, or worse, you put this panel on first, and then you're in BIG TROUBLE when you go to put the outer sill on!  We finally got this one right, and they fit the shells beautifully!

            Satisfaction 100% GUARANTEED! – All Monocoque Metalworks panels are guaranteed to be manufactured correctly, fit properly, and be suitable for a 100-point concours restoration.

    See our other auctions for other panels for your E-Type restoration!

Google Us! - Check out our BLOG Entries for tips on your E-Type shell restoration

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

MONOCOQUE METALWORKS

            Monocoque Metalworks  is a small shop located in Northeastern Maryland that specializes in Jaguar E-Type (XKE) body shell restoration.  If you are restoring your E-Type, the best place to start is a rock-solid bodyshell (or tub), and we can help!  We offer services ranging from the fabrication of a single panel to the construction of an entirely NEW bodyshell!

            FABRICATION AND SHIPPING OF ORIGINAL OR CUSTOM BODY PANELS – we have patterns and examples of nearly every E-Type panel and can fabricate any panel you need for your restoration.  Before you spend hundreds (or thousands) of dollars on Martin Robey panels that may or may not fit properly, give us a try!  OR, call us as the ONLY supplier of many of the smaller, internal panels that Martin Robey doesn’t supply (or lists in their catalog but don’t actually produce…)  Want some extra holes punched? – or some original holes not included? – or the panel produced in a heavier gauge? - no problem!

            COMPLETE RESTORATION OF YOUR TUB – we will take in your monocoque bodyshell, strip it down to bare metal, and replace all damaged or rusted panels using the proper techniques.  Your shell will be returned to you in primer, dead straight, rock-solid, safe, and EXACTLY as it left the factory.

            TUB EXCHANGE – looking to save time?  Exchange your existing monocoque bodyshell for one of our already restored shells (subject to availability).  You’ll arrive at the shop, unload your shell, and load up a completely restored, PERFECT shell and be back on your way in a few hours!  With this service, we can cut your project time down by YEARS!  Plus, you can exchange one body style for another – drop off a Coupe or 2+2 shell and take home a roadster!

            TUB MODIFICATION – we can “beef up” your tub with heavier gauge components for vintage racing, or add complete sub-frames, roll bars or cages.  If you can imagine it, we can fabricate it!

            FABRICATION OF AN ENTIRELY NEW TUB – we can build you an entire floor assembly with sills, gussets, tunnel, etc. – a complete cowl/firewall assembly – or an entirely NEW bodyshell!

            COMPONENT RESTORATION – We will happily restore any piece you care to ship us and return it to you in as-new condition.  This includes, but is not limited to: bonnet components, heaters, door shells, decklids, coupe hatches, etc.

            E-Type restoration is a labor of love at Monocoque Metalworks!  The shop is outfitted with INDUSTRIAL GRADE MACHINES – many of which are vintage machines themselves – carefully restored and modified with the correct tooling to produce perfect E-Type panels.  As a result, you will be amazed by the crisp cuts, straight bends, and perfect holes found on our panels!  We have forming capabilities that include shearing, braking, rolling, wire-edging, bead-rolling, notching and punching – in aluminum, steel, or stainless steel - up to and including 16-gauge (.060) or beyond.  We utilize a combination of MIG, TIG, Spot, and Plug welding to ensure that your car is assembled with factory-like originality, coupled with strength and safety you can depend on!

            Over 25 years of automotive restoration experience, specializing in E-Types.  My first car was a 3.8 roadster, and I have driven, raced, wrecked, and restored these cars ever since.  I know the cars intimately, and can provide references attesting to that fact.  However, restoring the E-Type’s monocoque shell has always been my true passion!  Let me indulge myself on your project – you will not find a more experienced and enthusiastic partner for your restoration!

            BOOK NOW!  We are continuously booking E-Type shell restorations and are backed up several months in advance - so don't wait to call, lock in your spot now!  I have restorable Series 1 Coupe and 2+2 tubs with straight roofs and quarters in stock, and can supply roadsters as well - plus a large selection of doors, decklids, hatches, hinges, bonnet pieces, etc.  And you don't have to wait until your car is all stripped down – call now and we’ll start building a solid tub TODAY and exchange it for yours later this year!

            Located just outside of Newark, DE, with easy access to I-95.  No job is too big or too small!  Give us a ring and let’s discuss your project – whether it’s one panel or the restoration of an entire body shell, we can handle it – with the attention to detail and ENTHUSIASM you’re looking for!

Monocoque Metalworks - (443) 907-2287 - Chuck

Google us for more info!

References available – or come visit the shop and I’ll show you our tools and skills in action!