Magnaflow 25201 Direct Fit Bolt-on High-flow Catalytic Converter Obdii on 2040-parts.com
US $276.70
Location:
Kansas City, Missouri, United States
Condition:NewBrand:Car SoundCountry/Region of Manufacture:United StatesManufacturer Part Number:25201Warranty:YesWill not ship to:CaliforniaEmissions Compliance:Federal & Canada (EPA) OBDIIUPC:841380021502
Federal & Canada (EPA) OBDII This catalytic converter has been designed and manufactured to meet the Federal and Canada emission performance requirements specified by the United States EPA. This converter is NOT compliant with the regulations set forth by the California Air Resources Board. This converter is NOT compliant for vehicles with California emissions that are registered in the state of New York.
DIRECT FIT CONVERTER MagnaFlow Direct-Fit Catalytic Converters by Car Sound are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
LIMITED WARRANTY Every Magnaflow catalytic converter comes with a warranty certificate that must be registered on Magnaflow's web site. Please refer to this certificate for the warranty details. Under the conditions stated on the certificate, the catalytic converter is warranted for: A) 50,000 miles for California exempted OBD-II converters; or B) 25,000 miles on all other converters, from the date of installation. The manufacturer further warrants the catalytic converter's external shell and end-pipes (those being attached during the original manufacturing process and otherwise unaltered during installation against defects in materials and workmanship, for 5 years or 50,000 miles, whichever comes first, from date of installation.
CAR SOUND QUALITY: Compare Car Sound's catalytic converters with any other manufacturer and you'll see why Car Sound has become a leader in the manufacturing of exhaust components. Others may employ one or two of the following features, but only Car Sound puts them all together to create a catalytic converter that exceeds basic need and function. Our years of research and development have resulted in many unique features that are exclusive to Car Sound. We combine efficient manufacturing techniques and state-of-the-art industrial design to produce an end process and product that sets, rather than meets, the highest standards of product performance andefficiency in the industry.
1. Car Sound converters have a ribbed body that minimizes expansion and distortion when the converter heats up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gasses and they hold the ceramic catalyst in proper alignment.
2. Car Sound converters have a 1/2" lap-joint where the necks meet the body. The neck does not extend into the converter body where it could hamper exhaust flow. This is the strongest and smoothest flowing inlet/outlet joint of any manufacturer.
3. We maintain separate dies on different sized inlets. We don't skimp by putting larger neck sizes on smaller bodies. This would reduce the flow of the converter and reduce the quality of our product.
4. Car Sound uses a monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. An improper coating could result in flow restrictions or an emission test failure.
5. Car Sound uses a heavier gauge stainless steel, tip to tip. Others use mixed weights and materials.
6. Car Sound converters are seam welded close to the converter body for a strong, tight bond. We don't weld along the edge which could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around.
7. Car Sound installs a factory capped, 90 degree air tube on "with air" converters. This saves time during installation. There is no need for additional labor to weld on an air tube or to create a bend when only an air tube stub is provided.
8. Car Sound uses an aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
Rare Corvettes are in the news these days, and one car that's drawing quite a bit of attention from collectors is a 1963 Chevrolet Corvette styling car known as the "Bunkie" Knudsen Corvette, built for Chevrolet general manager Semon E. "Bunkie" Knudsen. In just a few days, this uniquely styled 1963 Sting Ray convertible distinguished by it intricately designed side exhaust will be going up for auction.
The College for Creative Studies in Michigan, USA, is set to launch new Master of Fine Arts (MFA) degree programs in Design and Transportation Design. The new courses, which launch in Fall 2009, will give students a broad scope of skills and experience in 2D and 3D design, and will include a basic study in business that will take place at the University of Michigan's respected Stephen M Ross School of Business. CCS says that this will equip graduates with the tools required to implement concepts and make strategic decisions - increasingly important parts of a 21st century car designer's skillset.
UPDATED: Volkswagen has revealed a 496-hp version of the seventh-generation Golf GTI as part of activities at this year's Worthersee fan meet in Austria – and with it, projected the hot hatchback into the same league as some of the world's most celebrated supercars. Dubbed the Design Vision GTI, the radical new concept showcases a twin-turbocharged 3-liter V6 engine developed for use in upcoming models that, like the new Golf GTI, are based around Volkswagen's highly flexible MQB (modular transverse architecture) platform structure. Set to find its way into selected new Volkswagen models in future years, the direct injection engine replaces the Golf GTI's turbocharged 2.0-liter inline four, and is mounted transversely in the engine bay of the Design Vision GTI.
Magnaflow 93417 direct fit bolt-on high-flow catalytic converter obdii(US $183.50)
Magnaflow 51874 direct fit bolt-on high-flow catalytic converter oem grade obdii(US $451.51)
Magnaflow 448697 direct fit bolt-on catalytic converter california carb obdii(US $346.05)
Magnaflow 444022 direct fit bolt-on catalytic converter california carb obdii(US $448.45)
Magnaflow 38698 direct fit bolt-on catalytic converter california carb pre-obdii(US $335.95)
Magnaflow 39165 direct fit bolt-on catalytic converter california carb pre-obdii(US $359.27)