Magnaflow 93417 Direct Fit Bolt-on High-flow Catalytic Converter Obdii on 2040-parts.com
US $183.50
Location:
Kansas City, Missouri, United States
Condition:NewBrand:Car SoundCountry/Region of Manufacture:United StatesManufacturer Part Number:93417Warranty:YesWill not ship to:CaliforniaEmissions Compliance:Federal & Canada (EPA) OBDIIUPC:841380063946
Federal & Canada (EPA) OBDII This catalytic converter has been designed and manufactured to meet the Federal and Canada emission performance requirements specified by the United States EPA. This converter is NOT compliant with the regulations set forth by the California Air Resources Board. This converter is NOT compliant for vehicles with California emissions that are registered in the state of New York.
DIRECT FIT CONVERTER MagnaFlow Direct-Fit Catalytic Converters by Car Sound are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
LIMITED WARRANTY Every Magnaflow catalytic converter comes with a warranty certificate that must be registered on Magnaflow's web site. Please refer to this certificate for the warranty details. Under the conditions stated on the certificate, the catalytic converter is warranted for: A) 50,000 miles for California exempted OBD-II converters; or B) 25,000 miles on all other converters, from the date of installation. The manufacturer further warrants the catalytic converter's external shell and end-pipes (those being attached during the original manufacturing process and otherwise unaltered during installation against defects in materials and workmanship, for 5 years or 50,000 miles, whichever comes first, from date of installation.
CAR SOUND QUALITY: Compare Car Sound's catalytic converters with any other manufacturer and you'll see why Car Sound has become a leader in the manufacturing of exhaust components. Others may employ one or two of the following features, but only Car Sound puts them all together to create a catalytic converter that exceeds basic need and function. Our years of research and development have resulted in many unique features that are exclusive to Car Sound. We combine efficient manufacturing techniques and state-of-the-art industrial design to produce an end process and product that sets, rather than meets, the highest standards of product performance andefficiency in the industry.
1. Car Sound converters have a ribbed body that minimizes expansion and distortion when the converter heats up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gasses and they hold the ceramic catalyst in proper alignment.
2. Car Sound converters have a 1/2" lap-joint where the necks meet the body. The neck does not extend into the converter body where it could hamper exhaust flow. This is the strongest and smoothest flowing inlet/outlet joint of any manufacturer.
3. We maintain separate dies on different sized inlets. We don't skimp by putting larger neck sizes on smaller bodies. This would reduce the flow of the converter and reduce the quality of our product.
4. Car Sound uses a monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. An improper coating could result in flow restrictions or an emission test failure.
5. Car Sound uses a heavier gauge stainless steel, tip to tip. Others use mixed weights and materials.
6. Car Sound converters are seam welded close to the converter body for a strong, tight bond. We don't weld along the edge which could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around.
7. Car Sound installs a factory capped, 90 degree air tube on "with air" converters. This saves time during installation. There is no need for additional labor to weld on an air tube or to create a bend when only an air tube stub is provided.
8. Car Sound uses an aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
Audi is set to reveal an all-new SUV concept car based on the Audi TT at the Beijing Motor Show. The new Audi concept will be the second time the brand has floated the idea of a TT-style SUV this year, following the unveiling of the Audi Allroad Shooting Brake show car at January’s Detroit Motor Show. The new Audi SUV concept will have more of an ‘off-roader’ feel than the Shooting Brake, and so will take its styling cues from the Audi Q-model SUVs, as these images show.
Fred Jordan is a true believer. “It's the greatest automotive story ever told,” he said with the fire of a zealot. “This story is so wonderful, if someone could just get it down!”
We were sitting in the Datsun Heritage Museum, under a sign that said, “Datsunland,” and I was trying desperately to get it down.
Ex Grand-Am driver Don Istook from Fort Worth, Texas, is the lucky customer who took delivery of the first Audi TT RS model on U.S. shores since the 2008 Audi RS4. Istook was one of the 11,500 fans who signed the petition to bring the TT RS here, so it's only fitting that he gets one of the early copies.